• 제목/요약/키워드: Oxidizing atmosphere

검색결과 60건 처리시간 0.022초

산화성 분위기에서 석탁회분 슬래그의 고온 점도 측정 (High Temperature Viscosity Measurement of Coal Ash Slags in Oxidizing Atmosphere)

  • 정봉진
    • 에너지공학
    • /
    • 제4권3호
    • /
    • pp.324-330
    • /
    • 1995
  • 석탄 연소로에 사용 적합한 석탄의 선정 및 조업조건의 설정에 도움을 주고, 석탁회분의 슬래깅 성향을 파악하기 위해서 갈탄부터 역청탄에 이르는 4종의 시료를 사용하여 산화성 분위기에서 고온 회전 점도계를 사용하여 석탄회분 슬래그의 점도를 온도의 함수로서 측정하였다. 또한 석탄회분의 슬래깅 성향을 해석하기 위해서, 석탄회분 조성을 사용한 Base/Acid Ratio, Lignite Factor 및 Silica Ratio 등의 주요한 인자들이 슬래그 점도에 미치는 영향을 고찰하였다.

  • PDF

Implications of Air Pollution Effects on Athletic Performance

  • Pierson, W.E.;Covert, D.S.;Koenig, J.Q.;Namekata, T.;Kim, Y.S.
    • 한국환경보건학회지
    • /
    • 제11권2호
    • /
    • pp.1-16
    • /
    • 1985
  • There are a large number or chemical compounds that are present in a polluted atmosphere and that alone or in combination are important to consider for their potential effect on the respiratory system and impact on athletic performance. A general categorization or description of the level of pollution in terms of the concentration of one or more compounds or by type such as oxidizing compounds is inadequate and misleading. A useful initial categorization of pollutant compounds according to their mechanism of production, primary or secondary, is often made. For health effects, consideraiions of the physical state, gaseous or particulate, and the solublity and reactivity of the pollutant is also important. Pollutant compounds or substances that are emitted directly from a source and that undergo little or no chemical change in the atmosphere from source to receptor are termed primary pollutants.

  • PDF

고온 리튬용융염계 산화분위기에서 Inconel 합금의 부식거동 (Corrosion Behavior of Inconel Alloys in a Hot Lithium Molten Salt under an Oxidizing Atmosphere)

  • 조수행;서중석;윤지섭;박성원
    • 한국재료학회지
    • /
    • 제16권9호
    • /
    • pp.557-563
    • /
    • 2006
  • The electrolytic reduction of spent oxide fuel involves the liberation of oxygen in a molten LiCl electrolyte, which results in a chemically aggressive environment that is too corrosive for typical structural materials. So, it is essential to choose the optimum material for the process equipment handling molten salt. In this study, corrosion behavior of Inconel 713LC, MA 754, X-750 and 718 in the molten salt $LiCl-Li_2O$ under an oxidizing atmosphere was investigated at $650^{\circ}C$ for $72{\sim}216$ hours. Inconel 713LC alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of Inconel 713LC were $Cr_2O_3,\;NiCr_2O_4$ and NiO, and those of Inconel MA 754 were $Cr_2O_3\;and\;Li_2Ni_8O_{10}$ while $Cr_2O_3,\;NiFe_2O_4\;and\;CrNbO_4$ were produced from Inconel 718. Also, corrosion products of Inconel X-750 were found to be $Cr_2O_3,\;NiFe_2O_4\;and\;(Cr,Nb,Ti)O_2$. Inconel 713LC showed local corrosion behavior and Inconel MA 754, 718, X-750 showed uniform corrosion behavior.

ZnO-Fe2O3계 Spinel안료에 대한 연구 (Synthesis of Spinel Pigment on ZnO-Fe2O3 System)

  • 이진성;이응상
    • 한국세라믹학회지
    • /
    • 제26권2호
    • /
    • pp.187-194
    • /
    • 1989
  • Synthesis of spinel pigment on ZnO-Fe2O3 system. The object of this research is the synthesis of new spinel pigments on the basic of ZnO-Fe2O3 system which was substituted by ZnO-Fe2O3 by MgO-Al2O3. This research was progressed by measuring the X-ray diffraction and the reflectances of the substitued ZnO-Fe2O3 group. Which was obtained by sintering at the temperature of 1,00$0^{\circ}C$, 1,10$0^{\circ}C$, 1,20$0^{\circ}C$ and 1,25$0^{\circ}C$ and them by regrinding. In order to coloring test, here basic compositions of Barium glaze, Zinc glaze, Lime glaze, Lead glaze and Talc glaze used in this experiment are obtained from the ceramic work. Adding synthetic stains in these basic glazes with 3%, mixing and glazing on the specimen. The specimens was fired at 1,28$0^{\circ}C$ in reducing and oxidizing atmosphere in the gas kiln. The results of the research as follow. 1. Many kinds of spinel pigment was produced on ZnO-Fe2O3 system that is to say, not always only spinel. 2. Spinel peak was observed strongly on the ZnO-Fe2O3 system withsubstituting by MgO-Fe2O3 and MgO-Al2O3 group(the ratio of MgO, Al2O3 being increased, observed more strongly). 3. The most effective temperature ranges was 1,20$0^{\circ}C$~1,25$0^{\circ}C$. 4. The color of spinel pigments on this system was observed by "stable YR". 5. It was yellow red in oxidizing and green in reducing atmosphere on the coloring test.ring test.

  • PDF

Suppression of Abnormal Grain Growth in Barium Titanate by Atmosphere Control

  • Lee, Byoung-Ki;Chung, Sung-Yoon;Jung, Yang-Il;Suk-Joong L. Kang
    • 한국분말재료학회지
    • /
    • 제8권2호
    • /
    • pp.131-135
    • /
    • 2001
  • The ferroelectric properties of barium titanate strongly depend on its microstructure, in particular, grain size and distribution. During sintering, $BaTiO_3$ usually exhibits abnormal grain growth, which deteriorates considerably the ferroelectric properties. A typical technique to suppress the abnormal grain growth is the addition of dopants. Dopant addition, however, affects the ferroelectric properties and thus limits the application of $BaTiO_3$. Here, we report a simple but novel technique to prevent the abnormal grain growth of $BaTiO_3$ and to overcome the limitation of dopant use. The technique consists of stepwise sintering in a reducing atmosphere and in an oxidizing atmosphere. The materials prepared by the present technique exhibit uniform grain size and high dielectric properties. The technique should provide opportunities of having $BaTiO_3$-based materials with superior ferroelectric properties.

  • PDF

논에서 분리한 메탄산화세균 Methylomonas sp. SM4의 특성과 메탄올 생합성 (Characterization and Methanol Biosynthesis of a Methane-Oxidizing Bacterium, Methylomonas sp. SM4, Isolated from Rice Paddy Field Soil)

  • 박성민;;김시욱
    • KSBB Journal
    • /
    • 제32권2호
    • /
    • pp.124-132
    • /
    • 2017
  • A methane-oxidizing bacterium was isolated from rice paddy field soil around Jeollanam-do province, Korea, and characterized. The isolate was gram-negative, orange pigmented and short rod ($1.1-1.2{\times}1.6-1.9{\mu}m$). It was catalase and urease-negative but oxidase-positive. The strain utilized methane and methanol as sole carbon and energy sources. It had an ability to grow with an optimum pH 7.0 and an optimum growth temperature $30^{\circ}C$. The strain was resistant to antibiotic polymyxin B but sensitive to streptomycin, kanamycin, ampicillin, chloramphenicol and rifampicin. The isolate required copper for their growth with concentration range of $2-25{\mu}M$, with an optimum of $10{\mu}M$. Under optimal culture condition, specific cell growth rate and generation time were found to be $0.046hr^{-1}$ and 15.13 hr, respectively. Phylogenetic analysis based on 16S rDNA sequences indicated that the strain formed a tight phylogenetic lineage with Methylomonas koyamae with a value of 99.4% gene sequence homology. So, we named the isolate as Methylomonas sp. SM4. 8.6 mM methanol was accumulated in the reaction mixture containing 70 mM sodium formate and 40 mM $MgCl_2$ (MDH inhibitor) under atmosphere of methane:air (40:60) mixture for 24 hr at $30^{\circ}C$.

텅스텐-니켈-망간 합금의 액상소결에 관한연구 (A Study on the Liquid Phase Sintering of Tungsten-Nickel-Manganese alloy)

  • 홍문희;이성;노준웅;백운형
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 1995년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.25-25
    • /
    • 1995
  • Liquid phase sintering of 90W-6Ni-4Mn alloy has been investigated as functions of sintering atmosphere, heating rate, and reduction temperature. The present work accounts for the thermodynamic oxidatiodreduction reactions of constituent powders of W, Ni and Mn. By discounting these reactions, the previous investigations would obtain only the alloy with large pores and the lowered relative sintered density, by the liquid phase sintering under a dry hydrogen atmosphere. the sintering cycle consisted of a rapid heating to reduction temperatures under high purity nitrogen atmosphere, and holding for 4 hours and sintering at $1260^{\circ}C$ for 1 hour under a dry hydrogen gas. The relative density of the sintered alloy increased with increasing heating rate. As the reduction temperature increased, the relative density increased to the lm theotical density at the duction temture above $1150^{\circ}C$. The mimsturcatre of sintered alloys has been analysed by a scanning election microscope. The sintered density was compared with those obtained from the other investigators. It was found that the reduction $1150^{\circ}C$ results in the lowered densification of 90W-6Ni-4Mn alloy. This is caused by the fact that reducing reactions of W and Ni oxides contained in W an Ni powders concomitantly leads to oxidizing reaction of Mn powder the oxidized Mn is hardly reduced at sintering temperature and thereby remains large pores in the alloy. It is concluded that the W-Ni-Mn alloy with full density can be obtained by the precise control of atmosphere, heating rate, and sintering temperature.

  • PDF

Synthesis and Characterization of SiO2-Sheathed ZnSe Nanowires

  • Kim, Hyun-Su;Jin, Chang-Hyun;A,, So-Yeon;Lee, Chong-Mu
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권2호
    • /
    • pp.398-402
    • /
    • 2012
  • ZnSe/$SiO_2$ coaxial nanowires were synthesized by a two-step process: thermal evaporation of ZnSe powders and sputter-deposition of $SiO_2$. Two different types of nanowires are observed: thin rod-like ones with a few to a few tens of nanometers in diameter and up to a few hundred of micrometers in length and wide belt-like ones with a few micrometers in width. Room-temperature photoluminescence (PL) measurement showed that ZnSe/$SiO_2$ coaxial nanowires had an orange emission band centered at approximately 610 nm. The intensity of the orange emission from the $SiO_2$-sheathed ZnSe nanowires was enhanced significantly by annealing in a reducing atmosphere whereas it was degraded by annealing in an oxidizing atmosphere. The origins of the PL changes by annealing are discussed based on the energy-dispersive X-ray spectroscopy analysis results.

Y2O3가 도핑된 SrZrO3-금속전극계의 전기전도 특성 (Electrical Conduction in Y2O3-doped SrZrO3-metal Electrode System)

  • 백현덕;이풍헌
    • 한국세라믹학회지
    • /
    • 제39권4호
    • /
    • pp.367-376
    • /
    • 2002
  • $SrZr_{1-x}Y_xO_{3-\delta}$(x=0.05, 0.10)-금속전극 계에서 임피던스법과 d.c.법으로 전기전도도를 측정함으로써 고체전해질 및 전극전도도를 고찰하였다. 고체전해질과 anode를 통한 전기전도도는 $P_W^{1/2}$(PW는 수증기분압)에 의존하여 증가함을 보였다. Cathode 전도도는 $P_{O2}^{1/4}$에 비례함을 보였으며, 수증기분압 증가와 함께 감소하여 고체전해질내의 전자 결함의 농도와 함께 증가하는 것을 알 수 있었다. 수소분위기에서는 수증기의 첨가가 anode와 cathode 두 방향의 전극반응 속도 모두를 촉진하였다. 도펀트 첨가량이 5%에서 10%로 증가될 때 anode와 고체전해질의 전기전도도가 3배 이상 크게 증가하여 유효 산소이온공공의 농도가 급격히 증가함을 알 수 있었다. Pt와 Ag전극을 통한 cathode 전도도의 활성화에너지가 거의 같은 값을 나타냈으며 이는 cathode반응의 속도가 금속전극이 아니라 고체전해질표면에서 일어나는 반응에 의하여 결정되는 것으로 해석되었다.

공기 중에서 열증발법에 의하여 제작된 정팔면체 ZnO 결정 (ZnO Octahedron Fabricated by Thermal Evaporation Technique in Air)

  • 이근형
    • 한국전기전자재료학회논문지
    • /
    • 제26권4호
    • /
    • pp.294-297
    • /
    • 2013
  • ZnO crystals with octahedral shape were synthesized by thermal evaporation technique. $ZnF_2$ powder was used as the source material. The thermal evaporation and oxidation of $ZnF_2$ powder was carried out for 1 hr at $1,000^{\circ}C$ in air under atmospheric pressure. SEM images showed that the ZnO crystals produced by oxidizing $ZnF_2$ vapor possessed a characteristic octahedral shape. XRD spectrum revealed that the ZnO octahedron had hexagonal wurtzite structure. In the room temperature photoluminescence spectrum, a strong green emission peak at around 510 nm was observed.