효과적인 물환경관리계획을 수립하기 위해서는 다양한 기원의 유기물이 난분해성 유기물 농도 증가에 영향을 줄 수 있는지 여부를 파악하는 것이 중요하다. 특히 상당량의 광합성 산물은 식물플랑크톤에 의해 매일 생성되고 있지만, 이들이 수계 내 난분해성 유기물에 기여하는지에 대한 정보는 부족하다. 본 연구에서는 $^{13}C$ 및 $^{15}N$ 추적자 첨가실험을 통해 조류기원 유기물이 생분해(60일, 암배양) 및 산화제(과망간산칼륨) 처리 후 분해되지 않고 잔존하는지 여부를 확인하였다. 생분해 실험 결과 광합성을 통해 생성된 총 유기탄소($TO^{13}C$), 입자성 유기탄소($PO^{13}C$), 입자성 질소($P^{15}N$)는 각각 26%, 20%, 17%가 비 생분해성 유기물로 잔존하였다. 또한 상당량의 $PO^{13}C$가 과망간산칼륨에 의해 산화되지 않고 잔존하였다(초기: 12%, 60일 암배양 후: 38%). 이는 미생물에 의해 사용된 후 남아있는 조류기원 유기물이 난분해성 유기물에 기여할 수 있음을 의미한다. 또한 미생물에 의해 변형된 조류기원 유기물의 양은 COD 산화율 및 유기물 지표 간 격차에 영향을 줄 것으로 사료된다.
$250{\sim}400^{\circ}C$ 범위에서 $NO_x$ 제거를 위해 운영되는 선택적 촉매 환원법의 반응 온도를 $200^{\circ}C$ 이하로 낮추기 위해서는 NO를 $NO_2$로 산화시키는 전처리 공정을 필요로 한다. 이번 연구에서는 분말 $NaClO_2(s)$를 이용하여 NO를 $NO_2$로 산화시킨 후, 탄소 분산형 촉매를 이용한 저온에서의 $NO_x$, $SO_2$ 동시 제거에 관한 실험실 규모 실험과 제철소 소결 공장에서 실제 배기가스를 이용하는 bench 규모 실험을 진행하였다. 실험실 규모 실험에서는 반응기에 $NaClO_2(s)$ (2.4~3.6 g)를 충진 하여 $NO_x$ 200 ppm, $SO_2$ 75 ppm, $H_2O$ 10%, $O_2$ 15%의 모사가스(2.6 L/min)를 통과시켰으며, $NaClO_2(s)$와 반응 후의 모사가스를 탄소 분산형 촉매가 충진 된 반응기(공간 속도 = $2,000hr^{-1}$)로 주입하였다. bench 규모 실험에서는 $50Nm^3/hr$의 배기가스 유량에 screw feeder로 $NaClO_2(s)$ 분말을 주입하여 NO를 $NO_2$로 산화 시킨 후, $1,000hr^{-1}$ 탄소 분산형 촉매를 통과하여 $NO_x$ 제거 가능성을 확인하였다. 실험실 규모와 bench 규모 실험 모두 $SO_2$를 측정하며 $NO_x$, $SO_2$ 동시 제거 가능성을 확인하였다. 그 결과 실험실 규모와 bench 규모 실험 모두 $NaClO_2(s)$에 의하여 NO가 $NO_2$로 산화되었고, 이를 결합한 탄소 분산형 촉매에서 90% 이상의 $NO_x$, $SO_2$ 제거 효율을 나타내는 것을 확인하였다. 이상의 실험 결과로부터 $NaClO_2(s)$와 탄소 분산형 촉매의 결합은 저온에서 $NO_x$와 $SO_2$를 동시에 제거할 수 있음을 알 수 있었다.
내분비계교란물질로 알려진 비스페놀 A (bisphenol A, BPA) 수용액의 플라즈마 처리 및 분해 경로에 대해 조사하였다. 플라즈마화된 기체와 BPA 수용액을 효과적으로 접촉시키기 위하여 다공성 세라믹 관내에서 플라즈마를 생성시켜 세라믹 관의 세공을 통해 수중으로 고르게 분산시켰다. 기체의 유량, 인가 전압, 처리시간이 BPA 분해에 미치는 영향을 조사하였으며, 자외선 분광광도계, 이온 크로마토그래피, 기체크로마토그래피-질량분석기를 활용한 분석을 통해 반응 경로를 제시하였다. 기체의 유량이 너무 크거나 작으면 동일한 전력이 공급되더라도 처리효과가 떨어지며 적정한 기체 유량은 $1.0L\;min^{-1}$인 것으로 나타났다. 전압이 높을수록 많은 전력이 공급되므로 BPA를 제거하는 시간이 단축되나, 소모되는 에너지는 전압에 관계없이 유사하였다. 유량 $1.0L\;min^{-1}$과 전압 20 kV 조건에서 초기농도 $10L\;min^{-1}$ (부피 : 1 L)인 BPA가 30 min 이내에 모두 제거되었다. 오존이나 하이드록실 라디칼과 같은 활성성분들에 의해 BPA 구조가 파괴되어 생성되는 중간생성물들은 후속 산화반응을 통해 아세테이트, 포메이트, 옥살레이트와 같은 안정한 물질로 전환됨을 확인하였다.
토양 하부 및 지하수에 생존하고 있는 미생물들이 지하수의 산화/환원전위 변화에 관여하는 사실을 알아보기 위해 미생물들을 주입한 수용액의 시간별 Eh 변화량을 측정하였다. 황산염환원 미생물이 주입된 경우 수용액의 Eh값이 5일 만에 -120 mV에서 -500 mV까지 떨어졌으며, 실험 결과 디설프리칸스 세균이 불가리스 세균보다 수용액을 환원하는 능력이 상대적으로 좋았다. 철환원 미생물인 스와넬라 세균의 경우 Eh값이 황산염환원 세균보다 조금 높은 -400 mV를 보여 주었다. 금속환원미생물에 의해 수용액의 Eh값이 떨어지는 동안 용존 황산염 혹은 산화철이 환원되고 맥키나와이트(FeS)라는 황화광물이 형성되기 시작하였다. 이러한 실험 결과를 바탕으로 일반 지하수의 산화/환원전위는 그 지하수에 생존하고 있는 지하미생물들의 대사 활동에 많은 영향을 받고 있다는 사실과 극환원된 지하수 및 생기원 황화광물들이 풍부한 지하 환경은 산화 핵종들이 환원된 형태로 침전되어 핵종 이동이 억제될 가능성이 높은 곳으로 판단된다.
For this paper, we investigated the area specific resistance (ASR) of commercially available ferritic stainless steels with different chemical compositions for use as solid oxide fuel cells (SOFC) interconnect. After 430h of oxidation, the STS446M alloy demonstrated excellent oxidation resistance and low ASR, of approximately 40 $m{\Omega}cm^2$, of the thermally grown oxide scale, compared to those of other stainless steels. The reason for the low ASR is that the contact resistance between the Pt paste and the oxide scale is reduced due to the plate-like shape of the $Cr_2O_3$(s). However, the acceptable ASR level is considered to be below 100 $m{\Omega}cm^2$ after 40,000 h of use. To further improve the electrical conductivity of the thermally grown oxide on stainless steels, the Co layer was deposited on the stainless steel by means of an electroless deposition method; it was then thermally oxidized to obtain the $Co_3O_4$ layer, which is a highly conductive layer. With the increase of the Co coating thickness, the ASR value decreased. For Co deposited STS444 with 2 ${\mu}m$hickness, the measured ASR at $800^{\circ}$ after 300 h oxidation is around 10 $m{\Omega}cm^2$, which is lower than that of the STS446M, which alloy has a lower ASR value than that of the non-coated STS. The reason for this improved high temperature conductivity seems to be that the Mn is efficiently diffused into the coating layer, which diffusion formed the highly conductive (Mn,Co)$_3O_4$ spinel phases and the thickness of the $Cr_2O_3$(S), which is the rate controlling layer of the electrical conductivity in the SOFC environment and is very thin
Statement of problem: In its preceding work, change in surface characteristics were investigated in consideration that both microtopograpy and macroscopic configuration of implants surface are two of the most important factors, in that they can construct agreeable environment by raising surface energy, to affect osseointegration and biocompatibility explained by cell proliferation. Purpose: This study focused on examining cytocompatibility of dental implants materials Ti-Ag alloys, of which mechanical and electrochemical superiority to cp-Ti or Ti6Al4V were verified, in comparison with that of cp-Ti, and Ti6Al4V. Materials and methods: In this regard, MTT tests for L-929, the fibroblast connective tissues and cell proliferation tests for osteoprogenitor cells, MC3T3-E1 were performed on cp-Ti, Ti6Al4V, and Ti-Ag alloys following thermal oxidation according to appropriate heat treatment temperature(untreated, 400, 600, $800^{\circ}C$) and heat treatment duration(untreated, 0.5, 1, 4 hr). Results: The MTT tests on fibroblasts L-929 resulted in cell viability of over 90% in all experimental group entities, where, especially, the 100% of the viability for Ti-Ag alloys specimens accounted for the slightest adverse effect of ions release from those alloys on the cell. In MC3T3-E1 proliferation tests, the population of cells in the experimental group was roughly increased as experimentation proceeded, after two to four days. Proliferation showed highest viability for most of specimens, including Ti2.0Ag, treated at $600^{\circ}C$. Conclusion: In conclusion, it is the heat treatment temperature, not the duration that has considerable effects on thermal oxidation of specimens. Ti-Ag alloys treated at $600^{\circ}C$ proved to have the best surface morphology as well as cytocompatibility when compared with Ti or Ti6Al4V for short-term biocompatibility tests.
본 연구는 녹차를 열수로 추출하여 LDL에 대한 항산화 활성을 연구한 결과이다. 녹차 1.25 g에 열수 500 ml를 가하여 추출한 후 다시 500 ml를 가하여 재추출하였으며 이를 증발, 건조한 결과 추출액의 건물량은 4.67 mg이었다. 녹차잎의 함량이 1.25%가 되도록 조절한 녹차에는 항산화 활성이 강한 polyphenol 화합물중 (-) epicatechin gallate 54.1%, (-) epicatechin gallate 26.2%, (-) epigallocatechin 10.7%, (-) epicatechin 이 7.0% 및 catechin이 1.8% 함유되었다. Low density lipoprotein (LDL)의 산화에 있어서 LDL은 $CuSO_4$ 존재하에서 macrophage와 배양시켰더니 빠르게 산화를 일으켰다. 그러나 $5\;{\mu}M\;CuSO_4$ 매개 LDL의 산화에 50 및 $100\;{\mu}g/ml$ 농도의 GTE를 넣어 배양하면 거의 완전히 산화를 억제하였다. $5\;{\mu}M\;CuSO_{4}$ 존재하에서 산화시킨 LDL의 전기영동 이동거리는 native LDL보다 높았다. 또 50 및 $100\;{\mu}g/ml$ 농도의 GTE는 J774, human monocyte derived macrophags 및 vascular endothelial cells에서 유도되는 LDL의 산화를 억제하였다. $CuSO_4$ 및 cell 유도에 의하여 산화되는 LDL은 native LDL보다 더욱 많은 양이 human macrophage에 의하여 분해되고 GTE는 macrophage에 의한 $^{125}I-LDL$의 산화를 강력히 억제하였다. 그리고 GTE는 cell 매개 LDL의 macrophage에 의한 축적 또는 분해를 억제하였다. LDL을 $5\;{\mu}M\;CuSO_4$, 존재하에서 산화시킬 때 GTE를 50 및$100\;{\mu}g/ml$ 농도로 넣어 배양하면 공액 dienes의 생성이 억제되고, 또한 Oxid LDL macrophage derived human monocytes에서도 축적이 억제되었다.
포유류 배아의 초기발생과정에서 수란관이 하는 역할을 알아보기 위하여 소의 수란관내액이 생쥐 2-세포기 배아의 체외발생에 미치는 영향을 조사하였다. 대조군의 경우 5%의 배아만이 체외배양과정 중 퇴화한데 비해 5% 혹은 그 이상의 소의 수란관내액 (bOF)이 함유된 배양액 내에서 배양된 배아는 48시간이 지났을 때 모두 퇴화하였다. bOF를 65 \circ C에서 30분간 가열한 후 배양액에 첨가한 결과 bOF의 독성은 변화가 없었으나 90 \circ C에서 30분간 가열하였을때에는 독성이 거의 사라져 95% 의 배아가 정상적으로 발생하였다. bOF를 chymotrypsin으로 1시간 혹은 24시간동안 처리한 후 배양액에 첨가한 경우에도 독성이 사라져 각각 95.5%의 배아가 상실배 혹은 포배로 발생을 진행하였다. 산화방지제인 10mM 농도의 glutathione (GSH)을 bOF와 함께 배양액에 첨가한 결과 마찬가지로 bOF의 독성이 사라져 91.0%의 배아가 상실배 이상으로 발생한 반면 산화 방지능력이 없는 산화형 GSH(GSSG)를 bOF와 함께 배양액에 처리한 경우에는 bOF의 독성은 전혀 제거되지 않았다. 또한 mercaptoethanol, dithiothreitol, cysteamine 등의 다른 산화방지제도 GSSG와 마찬가지로 bOF의 독성을 제거하지 못하였다. 이와 같은 실험 결과로 미루어 소의 수란관내액에는 체외에 노출될 경우 독성을 나타내는 단백질 성분으로 된 물질이 있으며 이 물질의 독성은 대기 중의 산소의 산화작용에 의해 활성화되는 것으로 여겨진다.
Vinyl chloride monomer exists as gas phase at normal temperature and reacts with oxygen and strong oxidant in the air to form oxidized materials. Because of being easily synthesized, it is used as a main source at the synthetic reaction process of PVC synthesis factories. Ministry of Labor regulates its usage as a carcinogen and its exposure level as 1 ppm. But the amount of VCM production in PVC and VCM production process hasn't been exactly estimated. In addition, facilities of this factory are located in outdoor. Therefore, this study was designed to investigate effects of temperature on breakthrough of charcoal tube at a fixed concentration and temperature during VCM sampling based on NIOSH and OSHA methods which were used as methods of occupational environment measuring and analysis. During the sampling of VCM, methods of OSHA and NIOSH require flow rate of 0.05 lpm and sampling volume of $3{\ell}$, $5{\ell}$ respectively, at this time carbon molecular sieve tube and coconut shell charcoal tube are used to observe the breakthrough along with concentration and temperature. As a result, significant difference between average adsorbed amounts of OSHA methods but that of NIOSH methods cannot be found. NIOSH method is likely to be effected by high temperature and normal temperature in high concentration. Breakthrough is not found in the method of OSHA at different conditions of temperature and concentration. As the result of this study we could verify that breakthrough occurred in the process of sampling VCM with NIOSH methods. Therefor in summer time, breakthrough should be considered and research on the breakthrough volume should be done. It is considered the research about the specificity of the coconut shell charcoal and carbon molecular sieve sorbent should be done when sampling VCM in comming days.
난분해성 유기물과 암모니아성 질소의 동시제거를 위해 간헐폭기 생물활성탄 유동상법을 이용하여 고농도 유기물함유 침출수에 대하여 실험을 수행하였다. 간헐폭기시 고려되어야 하는 폭기 시간과 비폭기 시간에 대하여 실험적 검토를 수행하였고 자동컴퓨터제어 가능성에 대하여 고찰하여 보았다. 그 결과 생물활성탄 유동상 반응조에 충전한 활성탄의 물리적 흡착능은 초기의 처리효율에 크게 기여하였으며 간헐폭기 생물활성탄 유동상에 의한 침출수 처리시 정상상태에 도달하는 시간은 40일 정도이었고 TOC와 암모니아성 질소 처리시 양호한 프로세스임을 알 수 있었다. 폭기 및 비폭기시간은 60분 폭기/60분 비폭기의 조건이 30분 폭기/90분 비폭기에 비해 처리효율이 양호하게 나타났고 고농도 유기물함유 침출수 처리실험에서 간헐폭기 생물활성탄 유동상에 의한 처리방법은 높은 TOC제거율, 질산화율 및 탈질율, 난분해성 유기탄소 제거율을 확인할 수 있었다. 또한 간헐폭기시 ORP 곡선의 변화에서 나타나는 굴곡점은 무산소상태의 종결점을 나타내는 파라메터로 이용가능하며 이를 간헐폭기 반응조의 최적 운전모드를 설정하는데 응용할 경우 소규모 자동화가 가능할 것으로 판단되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.