• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.75-81
• /
• 2010

The feasibility of using the thin film technology in utilizing lanthanum strontium manganite (LSM) for a solid oxide fuel cell (SOFC) cathode in a low-temperature regime is investigated in this study. Thin film LSM cathodes were fabricated using pulsed laser deposition (PLD) on anode-supported SOFCs with yttria-stabilized zirconia (YSZ) electrolytes. Although cells with a 1 ${\mu}m$-thick LSM cathode showed poor low-temperature cell performance compared to that of a cell with a bulk-processed cathode due to the lack of a triple-phase boundary length, the cell with 200 nm-thick gadolinia-doped ceria (GDC) inserted between the LSM and YSZ showed enhanced performance and more stable operation characteristics in a comparison of a cell without a GDC layer. We postulate that the GDC layer likely improved the cathode adhesion, therefore contributing to the improvement of the cell performance instead of serving as an interfacial reaction buffer.

• 멤브레인
• /
• 제20권1호
• /
• pp.13-20
• /
• 2010

염료감응형 태양전지를 위한 고분자 전해질막을 제조하였다. 고분자물질로는 Poly(ethylene oxide) (PEO)를 사용하였으며, 가소제로서 poly(ethylene glycol) (PEG)를 첨가하였고, 전해질염 및 $I^-/{I_3}^-$의 공급원으로서 KI 및 $I_2$를 첨가하여 고분자 전해질막을 제조하였으며, 이와 같은 고분자 전해질막을 바탕으로 염료감응형 태양전지를 제조하였다. 고분자 전해질 내의 가소제로서의 PEG 함량은 0%에서 85%의 범위로 변화하였다. 이러한 PEG 함량 전 구간에서 고분자 전해질막은 그 형태를 자체적으로 유지하는(self supporting) 완벽한 고체 전해질막의 형태로 제조되었다. PEG 함량이 증가하면서 전해질막을 통한 이온전도도와 ${I_3}^-$ 이온의 확산도계수는 증가하였다. 염료감응형 태양전지에 있어서는 고분자 전해질막 내의 PEG 함량이 증가하면서 그 효율이 증가함을 볼 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.445-445
• /
• 2008

The behavior of ion trapping and migration in the yittria-stabilized zirconia pellets following high dose ion beam irradiation have been studied using SEM, EDX, and TGA. The ion beam was irradiated at room and higher temperatures and the differences in their results were interpreted in terms of dynamic annealing effects. The SRIM calculation was also performed to explain the cross sectional SEM image of the electrolytes.

• 폴리머
• /
• 제29권4호
• /
• pp.403-407
• /
• 2005

본 연구에서는 mobil crystalline material-41(MCM-41)의 함량 변화에 따른 고체 고분자 전해질(solid polymer electrolyte, SPE)의 이온전도도의 변화를 고찰하기 위하여, poly(ethylene oxide)(PEO), 메조포러스 기공 구조를 가지는 MCM-41 분자체, 그리고 리튬염을 이용하여 SPE를 제조하였다. SPE의 결정화도는 X-선 회절분석(XRD) 및 시차주사열량계(DSC)를 통하여 살펴보았으며, 주파수반응분석(FRA)으로 이온전도도를 측정하여 이온 전도거동을 고찰하였다. 그 결과, MCM-41을 고분자 혼합물에 첨가함에 따라 PEO의 견정성 영역의 성장을 억제할 수 있었으며, 이는 MCM-41이 메조포러스한 구조를 가지고 있기 때문이다. 또한, $P(EO)_{16}LiClO_4$/MCM-41 전해질 복합체의 이온 전도도는 8$wt\%$의 MCM-41을 첨가한 경우 가장 큰 이온전도도를 가지며, 8$wt\%$이상에서는 다소 감소된 이온전도도를 가짐을 관찰할 수 있었다. 이러한 이온전도도의 특성은 MCM-41의 첨가에 따른 고분자의 결정화도 변화와 밀접한 관계를 맺고 있다.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.486-490
• /
• 2012

$La_{7.33}Bi_2(SiO_4)_6O_2$ specimens were fabricated by standard solid-state synthesis route for solid oxide electrolytes. The calcined powders exhibited uniform particles with a mean particle size of about $28{\mu}m$. The room-temperature structure of $La_{7.33}Bi_2(SiO_4)_6O_2$ specimens was analyzed as hexagonal, space group P63 or P63/m, and the unit cell volume increased with increase a sintering temperature. The specimens sintered at $1,175^{\circ}C$ showed X-ray patterns of homogeneous apatite single phase without the second phase such as $La_2Si_2O_7$ and $La_2SiO_5$. The specimen sintered at $1,175^{\circ}C$ showed the maximum sintered density of 5.49 $g/cm^3$. Increasing the sintering temperature, total conductivities increased, activation energy decreased and the values were $1.98{\times}10^{-5}Scm-1$ and 1.23 eV, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• 전기화학회지
• /
• 제13권3호
• /
• pp.211-216
• /
• 2010

전해액 상용성의 boron trifluoride lithium methacrylate ($BF_3$LiMA)를 기본으로 하는 겔 고분자 전해질 (gel polymer electrolytes, GPE)에서 $BF_3$LiMA의 농도가 이온전도도, 전기화학적 안정성에 미치는 영향을 AC impedance 측정법과 linear sweep voltammetry (LSV)를 통하여 평가하였다. 그 결과 $BF_3$LiMA가 4wt% (고분자함량 21 wt%)일 때, 상온 이온전도도가 $5.3{\times}10^{-4}Scm^{-1}$로서 가장 높게 관찰되었으며 4 wt% 전후로 다시 감소하였다. $BF_3$LiMA 기반의 GPE는 음이온이 고정되어 있는 자기-도핑형 계열로서 우수한 전기화학적 안정성을 확인하였다. 한편 $BF_3$LiMA 기반 GPE는 리튬금속과 비교적 불안정한 계면반응성을 보여주었지만 흑연/GPE/흑연, LCO/GPE/LCO에서는 높은 계면안정성을 형성하였다. 따라서 $BF_3$LiMA 기반의 GPE를 통하여 높은 상온 이온전도도와 전기화학적 안정성 및 흑연과 LCO 양극산화물에 대한 우수한 계면특성을 확보할 수 있었다.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.283-289
• /
• 2001

50/50 vol% LSM-YSZ (La$_{1-x}$Sr$_{x}$MnO$_3$-yttria stabilized zirconia)의 복합공기극이 콜로이드 증착법에 의해 연마된 YSZ 전해질상에 증착되었다. 그 전극 특성은 주사전자현미경, X선회절과 임피던스 분석기에 의해 연구되어졌다. 90$0^{\circ}C$에서 공기/LSM -YSZ/YSZ/Pt/공기 셀에 대해 측정된 전형적인 임피던스 스펙트럼들은 2개의 불완전한 호(depressed arc)로 구성되었다. LSM 전극에 대한 YSZ의 첨가는 전극내의 삼상계(TPB) 영역을 증가시켰으며, 이것이 LSM-YSZ 복합공기극의 비저항을 감소시켰다. 또한 전해질 표면의 불순물 제거와 TPB 길이의 증가를 위한 전해질 표면연마는 공기극의 비저항을 훨씬 더 감소시켰다. LSM-YSZ 공기극의 비저항은 작동온도, 공기극의 조성과 입자크기, 인가전류 및 전해질의 표면거칠기에 의해 큰 영향을 받았다.

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.319-325
• /
• 2011

The electrical properties of sputtered GDC thin films on $Al_2O_3$ substrates was studied. The electrical properties of the films were measured to evaluate the ion conductivity of GDC thin films for co-planar SOFC electrolytes. The impedance of the GDC thin films on $Al_2O_3$ substrates was affected by the film thickness and the impedance of thin film exhibited higher value than thick films. Similarly, the conductivity of the thick film showed much higher value than thin films. It indicated that the film thickness is the main factor affecting the conductivity and impedance of the GDC electrolyte for the co-planar SOFC.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.195-198
• /
• 2010

It has been considered to apply GDC ($Gd_{0.1}Ce_{0.9}O_{1-X}$) for low-temperature SOFC electrolytes because it has higher ionic conductivity than YSZ at low temperature. However, open circuit voltage with using GDC ($Gd_{0.1}Ce_{0.9}O_{1-X}$) electrolyte in SOFCs, becomes lower than using YSZ (8 mol% Yttria stabilized Zirconia) electrolyte because GDC has electronic conductivity. In this work, the effect of changing GDC electrolyte thickness on the open circuit voltage has been investigated. Ni-GDC anode-supported unit cells were fabricated as follows. Mixed NiO-GDC powders were pressed and pre-sintered at $1200^{\circ}C$. And then, GDC electrolyte material was dip-coated on the anode and sintered at $1400^{\circ}C$. Finally the LSCF-GDC cathode material was screen-printed on the electrolyte and sintered at $1000^{\circ}C$. Electrolyte thickness was controlled by the number of dip-coating times. Open circuit voltage was measured depending on electrolyte thickness at $650^{\circ}C$ and found that the thicker GDC electrolyte was, the better OCV was.