• 전자공학회논문지SC
• /
• 제48권6호
• /
• pp.51-56
• /
• 2011

자성 산화철 나노입자(iron oxide nanoparticle, ${\gamma}-Fe_2O_3$) 표면을 기능성 유기 분자를 이용하여 아민기($-NH_2$), 카르복실기(-COOH)로 표면 처리 하였으며, 이들 기능기로 표면 처리된 산화철 나노입자를 FT-IR을 이용하여 나노입자 표면을 분석하였다. 아민기, 카르복실기로 표면처리된 산화철 나노입자 표면에 특정 배열을 갖는 21-base pair 길이의 프로브 DNA를 고정하였고, 형광 라벨(Cy5)이 부착된 상보적, 비상보적 타게트 DNA를 이용하여 고정된 프로브 DNA와 hybridization을 진행하였다. 각각의 상보적, 비상보적 타게트 DNA와 hybridization 처리한 산화철 나노입자를 confocal microscopy를 이용하여 관찰하였으며, 그 결과 산화철 나노입자를 이용하여 특정 배열의 DNA검출에 성공하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.437-437
• /
• 2014

Various oxide particles are synthesized in an ambient condition using an electron beam irradiation system. The formation of oxide particles is confirmed by FT-IR spectra results and the X-ray photoelectron spectrum. It is also shown that the morphology and size of oxide particles are significantly influenced by the type and flowrate of dilution gas. The energy dispersive X-ray (EDX) analysis also confirms that various oxide particles are synthesized.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.1999-2003
• /
• 2014

Indium tin oxide ($In_2Sn_{1-x}O_{5-y}$) nanoparticles were synthesized by hydrothermal method from stable indium tin acetylacetone complexes and postannealing at $600^{\circ}C$. The absence of chlorine ions shortened the synthesis process, decreased the particle agglomeration and improved the particle purity. The introduced complexing ligand acetylacetone decreased the obtained nanoparticle size. The improved powder properties accelerated the sintering of the $In_2Sn_{1-x}O_{5-y}$ nanoparticles and reached a relative density of 96.4% when pressureless sintered at $1400^{\circ}C$.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2519-2522
• /
• 2014

Recently, the observation of the electrocatalytic behavior of individual nanoparticles (NPs) by electrochemical amplification method has been reported. For example, the Iridium oxide ($IrO_x$) NP collision on the Pt UME was observed via electrocatalytic water oxidation. However, the bare Pt UME had poor reproducibility for the observation of NP collision signal and required an inconvenient surface pre-treatment for the usage. In this manuscript, we has been investigated other metal electrode such as Cu UME for the reproducible data analysis and convenient use. The $IrO_x$ NP collision was successively observed on the bare Cu UME and the reproducibility in collision frequency was improved comparing with previous case using the $NaBH_4$ pre-treated Pt UME. Also, the adhesion coefficient between NP and the Cu UME was studied for better understanding of the single NP collision system.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.345-352
• /
• 2021

In this study, Ni nanoparticle supported by graphene oxide (GO) (Ni-GO) is successfully synthesized through hydrothermal synthesis and calcination, and Cr(VI) is extracted from aqueous solution. The morphology and structure of Ni-GO composites are characterized by scanning electron microscopy (SEM), trans mission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). High-resolution transmission electron microscopy (HRTEM) and XRD confirms the high dispersion of Ni nanoparticle after support by GO. Loading Ni on GO can obviously enhance the stability of Ni-GO composites. It can be calculated from TGA that the mass percentage of Ni is about 60.67 %. The effects of initial pH and reaction time on Cr(VI) removal ability of Ni-GO are investigated. The results indicate that the removal efficiency of Cr(VI) is greater than that of bared GO. Ni-GO shows fast removal capacity for Cr(VI) (<25 min) with high removal efficiency. Dynamic experiments show that the removal process conforms to the quasi-second order model of adsorption, which indicates that the rate control step of the removal process is chemical adsorption. The removal capacity increases with the increase of temperature, indicating that the reaction of Cr(VI) on Ni-GO composites is endothermic and spontaneous. Combined with tests and characterization, the mechanism of Cr(VI) removal by rapidly adsorption on the surface of Ni-GO and reduction by Ni nanoparticle is investigated. The above results show that Ni-GO can be used as a potential remediation agent for Cr(VI)-contaminated groundwater.

• 전기화학회지
• /
• 제16권2호
• /
• pp.70-73
• /
• 2013

산화 이리듐은 물의 산화반응에 대해 좋은 전기촉매 물질로서 많은 연구가 이루어 지고 있다. 최근 전기화학적 증폭방법을 이용하여 산화 이리듐 나노입자의 개별적인 촉매특성을 연구한 결과를 보면 촉매반응에 의한 전류가 지속적으로 유지되지 않고 시간에 따라 감소하는 결과가 얻어 졌다. 이러한 촉매특성의 사라짐에 대한 원인을 규명하고자 사이즈가 큰 이리듐전극을 산화시킨 산화이리듐 전극에서 물의 산화반응을 진행시켰다. 그 결과 나노입자에서와 유사하게 전류가 감소하는 현상이 관찰되었다. 큰 전극에서의 실험에서는 발생하는 산소방울을 관찰 할 수 있었는데 산소방울의 발생 주기가 전류의 증감주기와 일치하는 것으로 보아 전류의 감소는 산소방울에 의한 버블 과전압 때문으로 생각된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.90-90
• /
• 2009

박막 태양전지의 단락전류를 증가시키기 위해서는 투명전도 산화막의 표면 식각을 통한 광포획 특성 극대화가 중요하며, 일반적으로 스퍼터링법으로 제작된 투명전도 산화막의 표면 식각은 HCl solution을 이용한다. 본 연구는 투면전도 산화막 증착시 seed로 작용할 수 있는 colloidal 형태의 nanoparticle을 유리기판에 형성한 뒤 rf-magnetron sputtering 법을 이용하여 ZnO:Al(AZO) 투명전도 산화막을 증착하여 광학 전기적 특성 변화를 분석하였다. Nanoparticle을 사용하여 제조된 AZO 박막은 nanoparticle의 확산에 의한 전자농도의 향상이 보였으나, 이동도의 감소로 인해 전기적 특성에 큰 변화는 없었다. 반면 AZO 박막의 표면형상이 nanoparticle로 인해 변하여 박막의 광 포획을 위한 안개도가 향상됨을 확인 할 수 있었으며, 이로 인해 표면 형상 제어를 통한 박막 태양전지 적용을 위한 투명전도 산화막을 제작할 수 있었다.

• 한국방사선학회논문지
• /
• 제12권2호
• /
• pp.167-172
• /
• 2018

국내 남성에게서 많이 발생하는 전립선암을 대상으로, 근접치료 시 나노입자 사용에 따른 선량을 평가하여 기초자료를 제시하고자 하였다. 선량평가는 몬테카를로 시뮬레이션 기법인 MCNPX 프로그램을 이용하였다. 선원은 국내 HDR장비에 다용하는 $^{192}Ir$으로 선정하고 나노입자는 금, 가돌리늄, 산화철, 요오드를 사용하였다. 그 결과 표적장기인 전립선은 나노입자를 사용 시, 사용하지 않은 경우에 비해 모두 흡수선량이 높게 나타났다. 특히 금 나노입자가 $3.13E-03J/kg{\cdot}e$의 값으로 가장 높았다. 주변장기 및 주변인에 대한 선량은 나노입자 사용에 따른 차이가 크지 않은 것으로 나타났다. 나노입자 사용은 치료가능비를 상승시켜 치료효율을 증가시킬 수 있을 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.264-264
• /
• 2013

Strong metal-support interaction effect is an important issue in determining the catalytic ac-tivity for heterogeneous catalysis. In this study, we investigated the support effect and the role of organic capping layers of two-dimensional Pt nanocatalysts on reducible metal oxide supports under the CO oxidation. Several reducible metal oxide supports including CeO2, Nb2O5, and TiO2 thin films were prepared via sol-gel techniques. The structure, chemical state and optical property were characterized using XRD, XPS, TEM, SEM, and UV-VIS spectrometer. We found that the reducible metal oxide supports have a homogeneous thin thickness and crystalline structure after annealing at high temperature showing the different optical band gap energy. Langmuir-Blodgett technique and arc plasma deposition process were employed to ob-tain Pt nanoparticle arrays with capping and without capping layers, respectively on the oxide support to assess the role of the supports and capping layers on the catalytic activity of Pt catalysts under the CO oxidation. The catalytic performance of CO oxidation over Pt supported on metal oxide thin films under oxidizing reaction conditions (40 Torr CO and 100 Torr O2) was tested. The results show that the catalytic activity significantly depends on the metal oxide support and organic capping layers of Pt nanoparticles, revealing the strong metal-support interaction on these nanocatalysts systems.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.236.1-236.1
• /
• 2014

Compounds of Ga, such as gallium oxide (Ga2O3) and gallium nitride (GaN), are of interest due to its unique properties in semiconductor application. In particular, GaN has the potentially application for optoelectronic device such as light-emitting diodes (LEDs) and laser diodes (LDs) [1]. Nanoparticle is an interesting material due to its unique properties compared to the bulk equivalents. In this report, we develop a synthesizing method for gallium nitride nanoparticle using non-thermal plasma. For gallium source, the gallium is heated by thermal conduction of tungsten boat which is heated by eddy current induced from RF current in antenna. Nitrogen source for nanoparticle synthesis are from inductively coupled plasma with N2 gas. The synthesized nano particles are analyzed using field-emission scanning microscope (FESEM), transmission electron microscope (TEM) and x-ray photoelectron spectroscopy (XPS). The synthesized particles are investigated and discussed in wide range of experiment conditions such as flow rate, pressure and RF power.