• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.79-84
• /
• 2024

Methane is an abundant and renewable hydrocarbon, but it causes global warming as a greenhouse gas. Therefore, methods to convert methane into useful chemicals or energy sources are needed. Methanol is a simple and abundant chemical that can be synthesized by the partial oxidation of methane. Methanol can be used as a chemical feedstock or a transportation fuel, as well as a fuel for low-temperature fuel cells. However, the electrochemical oxidation of methanol is a complex and multi-step reaction. To understand and optimize this reaction, new electrocatalysts and reaction mechanisms are required. This review discusses the methanol oxidation reaction mechanism, recent research trends, and future research directions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.17-26
• /
• 1984

A computer program (DIFSIM: Diffusion SIMulator) was written to calculate the impurity profile, specifically boron and phosphorus, due to three different diffusion processes-predeposition, drive-in in inert ambient, and drive-in in oxidizing ambient. The vacancy mechanism including Fair and Tsai's theory for phosphDrus diffusion was widely incorporated for modeling various diffusion processes. The concentrationtependent oxidation rate was also explained using the vacancy model, while the oxidation - enhanced diffusion was mo dolled using catkins replacement mochanlsm . The simulation results using DIFSIM showed a fairly good agreement with the experimental data by adjusting some of the empirical parameters in the program. The results obtained using DIFSIM were compared with the results from SUPREM II.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.1
• /
• pp.49-52
• /
• 1999

Various metal oxides such as Fe2O3, FeO, TiO2, MnO2, MoO3, WO3 and ZnO have been used as a catalyst for Gif-KRICT type cyclohexane oxidation. In this reaction, the conversion of cyclohexane to cyclohexanone and cyclohexanol and the selectivity ratio of cyclohexanone to cyclohexanol were greatly affected by the acidity of metal oxides. When metal oxide has more acidic property, the reactivity on oxidation is increased and the formation of cyclohexanone is more favored. From this result, we proposed a new mechanism for the biomimetic Gif-KRICT oxidation system.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.424-427
• /
• 1994

Effects of iron compounds in known biomimetic oxidation systems (Gif IV and GoAgg II) have been studied on activity and ketone/alcohol selectivity of cyclohexane oxidation. Both ketone/alcohol ratio and cyclohexane conversion were affected by counter-ion Z of iron compounds Z-Fe. When Z has a more electron withdrawing property, the reactivity is increased and the formation of ketone is favored. From these experimental results, a new mechanism is proposed for the biomimetic oxidation system.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2003.06a
• /
• pp.1-14
• /
• 2003

Lipid oxidation is one of the most important non-microbial causes of meat quality deterioration. However, there have been different/conflicting views concerning the primary catalysts of lipid oxidation in meat. This presentation provides brief overviews of lipid oxidation mechanism in general and catalysis of lipid oxidation in meat, and then focuses on inter-species differences in lipid oxidation potential, using results from our studies on meats (beef, pork and chicken) at retail and the respective meats of uniform postmortem history. The inter-species differences have highlighted the relative roles of meat pigment (myoglobin) content, catalase activity, and the concentration of oxidation substrates (particularly polyunsaturated fatty acids) in determining the lipid oxidation potential of raw meat versus cooked meat.

• Journal of Surface Science and Engineering
• /
• v.26 no.5
• /
• pp.235-244
• /
• 1993

The oxidation behavior of a two-phase(Ti3Al+TiAl) intermetallic compound, Ti-33.8wt%Al, has been in-vestigated in air at 800, 900 and $^1000{\circ}C$. Though the isothermal oxidation behavior followed a parabolic law up to 100$0^{\circ}C$ indicating that protective oxide scales were formed, the cyclic oxidation behavior followed a lin-ear law in the entire temperature range tested because flaky or stratified scales were usually spalled from the surface during cooling. During oxidation at 80$0^{\circ}C$, the alloy showed excellent oxidation resistance because continuous protective Al2O3 films were formed on the outermost surface of the alloy. However, above $900^{\circ}C$, the oxidation resistance of the alloy was decreased gradually because relatively non-protective TiO2 scales as well as some of Al2O3 scales were formed on the outer oxide scale. The oxidation mechanism of the alloy at different temperature was proposed.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2002

This study explored for treatment processes by investigating the treatment efficiency and reaction mechanism through oxidation reaction using UV and $O_3$ as oxidant in compensate the wastewater containing nitrobenzene that is non biodegradable organic. Also by modeling these reactions, we try to step explanation of optimum reaction rate and reaction mechanism as the development of the computer program predictable the reaction rate by modeling the reaction. By using this model, after kinetic constant for each reaction from an experimental data is made an optimization and for hardly contribute to reaction rate in reaction kinetic equation is made an ignorance and suppose the simplified reaction mechanism, examined the propriety of computer simulation model and simplified reaction mechanism by comparing and inspecting the reaction kinetic constant and masstransfer coefficient. An investigation results for destructional treatment of nitrobenzene in the wastewater as non-biddegradable organic using UV, $O_3{\;}O_2{\;}H_2O_2-UV$ as oxidant.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.1
• /
• pp.46-52
• /
• 2009

The oxidation of surrogate mixtures for gasoline fuel was studied numerically in perfectly stirred reactor(PSR) to develope the needed detailed reaction mechanism. The reaction mechanism was assembled with the mechanisms for the oxidation of iso-octane or kerosene. It was shown that the reaction model predicted reasonably well the concentration profiles of fuel and major species reported in the literature. As the addition of kerosene into iso-octane as fuel was increased, the concentrations of $C_2H_2$ and benzene became high. Especially benzene known as a carcinogen appeared at a very high concentration in the flue gases.

• Clean Technology
• /
• v.17 no.4
• /
• pp.370-378
• /
• 2011

Catalytic activity of $V_2O_5-WO_3/TiO_2$-based SCR catalyst was examined for the oxidation of gas-phase elemental mercury to oxidized mercury. Mercury species was not detected on the commercial SCR catalyst after the oxidation reaction of elemental mercury, regadless of the presence of HCl acting as oxidant and the reaction conditions. This suggests that elemental mercury oxidation by HCl could occur via a Eley-Rideal mechanism with gas phase or weakly-bound mercury on the surface of $V_2O_5-WO_3/TiO_2$ SCR catalyst. The activity for mercury oxidation was significantly increased with the increase of $V_2O_5$ loading, which indicates that $V_2O_5$ is the active site. However, turnover frequency for mercury oxidation was decreased with the increase of $V_2O_5$ loading, indicating the activity for mercury oxidation was strongly dependent on the surface structure of vanadia species. The activity for oxidation of elemental mercury under SCR condition was much less than that under oxidation condition at the same HCl concentration and reaction temperature.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.6
• /
• pp.354-360
• /
• 2009

This paper reports the oxidation mechanism of epitaxial Ni thin films grown on GaN/sapphire(0001) substrates, investigated by real-time x-ray diffraction and scanning electron microscopy. At the initial stage of oxidation process, a thin NiO layer with a thickness of ${\sim}50\;{\AA}$ was formed on top of the Ni films. The growth of such NiO layer was saturated and then served as a passive oxide layer for the further oxidation process. For the second oxidation stage, host Ni atoms diffused out to the surfaces of initially formed NiO layer through the defects running vertically to form NiO grains, while the sites that were occupied by host Ni, became voids. The crystallographic properties of resultant NiO films, such as grain size and mosaic distribution, rely highly on the oxidation temperatures.