• 대한방사선치료학회지
• /
• 제29권1호
• /
• pp.19-26
• /
• 2017

목 적: 양성자 치료계획에서 metal 재질의 fiducial marker에 의한 선량 계산오차를 최소화하려면 density override의 적용은 매우 중요하다. 하지만 실제 metal 재질로 density override을 할 경우 정확한 contouring 및 range compensator 제작에 어려움이 있기에 본 연구에서는 fiducial marker의 주변 재질로 density override를 시행하고 fiducial marker의 위치, 재질, beam의 개수에 따른 선량분포를 비교, 분석하여 평가하고자 한다. 대상 및 방법: Water phantom을 이용하여 fiducial marker의 위치를 proton beam의 최대 비정 끝에서부터 1.5, 2.5, 4.0, 6.0 cm로 설정하고 재질로는 gold, steel, titanium으로 설정하여 실제 metal 재질 및 주변 재질로 density override를 적용한 치료계획을 세웠다. 또한 본원에서 양성자치료를 받은 간암 환자 1명을 선정하여 proton beam의 최대 비정 끝에서부터 0, 1.5, 3.5 cm로 설정하고 재질로는 gold, steel, titanium으로 설정하여 치료계획을 세웠다. Fiducial marker의 재질, 위치 및 beam의 개수에 따른 PTV 내에 Homogeneity Index(HI), Conformity Index(CI), 종양에 가장 근접한 Organ At Risk(OAR)인 Esophagus의 maximum dose을 평가 지표로 설정하고 비교 분석하였다. 결 과: Water phantom 및 간암 환자를 대상으로 한 치료계획에서 fiducial marker의 위치에 따른 Homogeneity Index를 분석한 결과 실제 metal 재질로 density override 했을 때보다 주변 재질로 density override했을 때 Homogeneity Index가 감소했으며 주변 재질의 density override에서 하나의 beam에 대해서는 최대 비정 끝에서 멀리 위치할수록, 두 개 이상의 beam에서는 isocenter에 가까이 위치할수록 Homogeneity Index가 증가하였다. Fiducial marker의 위치에 따른 Conformity Index 및 종양 주위 OAR의 maximum dose를 분석한 결과 주변 재질로 density override 했을 때 Conformity Index는 1에 가까웠으며 OAR의 maximum dose는 크게 감소했다. 결 론: 일반적으로 임상에서 사용하는 작은 fiducial marker에 대해서 실제 metal 재질이 아닌 주변 재질로 density override 했을 때 선량 균등도 및 target coverage를 높이는 동시에 주변 정상조직에 대한 선량을 줄일 수 있었다. 따라서 fiducial marker을 최대한 피해서 치료계획을 세우는 것이 바람직하지만 beam path 상에 fiducial marker가 있는 경우 주변 재질의 density override 시행함으로써 보다 정밀한 양성자 치료 효과를 기대할 수 있을 것으로 사료된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.321-327
• /
• 1993

In order to maintain the cutting force at a desired level during peripheral end milling processes in spite of variation of the depth of cut and other machining conditions, a feedrate override. Apaptive Control Constraint (ACC) system are developed. Feedrate override was accomplished by a developed MMC board and PMC interface techniques. Nonlinear model of the cutting process was linearized as an adaptive model with time varying paramrters. Integral type estimators were introduced for on-line identification of cutting and control parameters in peripheral and milling processes. Zero Order Jold (ZOH) type degital control methodology which uses pole-placement concepts was applied for the ACC system. Performance of the developed ACC system was confirmed on the vertical machining center equipped with FANUC OMC for a large amount of experiment

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.63-72
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes a feedrate override Adaptive Control Constraint (ACC) system was developed. The feedrate override function was accomplished through a development of programmable machine controller (PMC) interface technique on the NC controller, Nonlinear model of the cutting process was linearized as an adaptive model with a time varying process parameter. An integral type estimator was introduced for on-line estimation of the cutting process parameter, Zero order hold digital control methodology which uses pole-assignment concept for tuning of PI controllers was applied for the ACC system. Performance of the ACC system wsa confirmed on the vertical machining center equipped with fanuc OMC through a large amount of experiment.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.257-262
• /
• 1996

The characteristics of adjuster rods have been studied for the application to DUPIC core in two aspects: the half an hour xenon override capability and power flattening. The transient analysis has shown that the adjusters used for CANDU 6 have the reactivity worths more than required to override xenon load for DUPIC core. Parametric study has shown that removing 7 adjuster rods in the middle row and adjusting the strength of the rest of adjuster rods can provide the performances no worse than those of natural uranium core.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.848-854
• /
• 1999

In this paper, we designed and implemented a precise pulse motor controller chip that generates the pulse needed to control step motor, DC servo and AC servo motors. This chip generates maximum pulse output rate of 5Mpps and has the quasi-S driving capability and speed and moving distance override capability during driving. We designed this chip with VHDL and executed a logic simulation and synthesis using Synopsys tool. The pre-layout simulation and post-layout simulation was executed by Compass tool. This chip was produced with 100 pins, PQFP package by 0.8${\mu}{\textrm}{m}$ gate array process and implemented by completely digital logic. We developed the test hardware board of performance and the CAMC(Computer Aided Motor Controller) Agent softwate to test the performance of the pulse motor controller chip produced. CAMC Agent enables user to set parameters needed to control motor with easy GUI(Graphic User Interface) environment and to display the output response of motor graphically.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.690-694
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes, a feedrate override Adaptive Control Constant system was developed. This paper presents an explicit pole-assignment PI-control law through spindle motor current monitoring and its application to cutting force regulation for feedrate optimization. An experimental set-up is constructed for the commercial CNC machining center without any major changes of the structure. A data transfer system is constructed with standard interface between an IBM compatible PC and a CNC of the machining center. Experimental results show the validity of the system.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.87-96
• /
• 2020

In this study, a variable elasticity spring was applied to improve the pressure control precision of conventional relief valves. The equilibrium equation of the forces acting on the valve poppet was derived; it is demonstrated that matching the elastic rate of the pressure-adjusting coil spring to the equivalent elastic rate of the flow force improved the pressure override. The procedures that were used to design the variable elasticity spring are presented, and some applications of the variable elasticity spring are also introduced. Computer simulations were used to analyze three cases: a poppet-closed flow force structure, a poppet-open flow force structure with a constant elasticity spring, and a structure containing a variable elasticity spring. It is confirmed that the pressure control precision of the relief valve can be significantly improved upon by applying a variable elasticity spring to the poppet-open flow force structure.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.85-91
• /
• 2005

군용항공기는 고받음각에서 적절한 조종성 및 항공기 이탈에 대한 안정성을 확보하고 있어야 한다. 고받음각에서 항공기가 이탈에 진입할 수 있는 한계값은 항공기 형상설계에 직결되는 문제이다. 하지만 현대의 고성능 전투기는 전기식 비행제어계통을 사용하여 고받음각 제어법칙을 설계함으로써 한계 값 내에서 항공기의 안정성을 보장하고 있으며 항공기가 이탈 시, 안전하게 회복할 수 있도록 고받음각 제어법칙을 설계한다. 현재 T-50에 적용되어 있는 고받음각 제어법칙은, 세로축 방향으로는 받음각 제한기 및 MPO(Manual Pitch Override) 모드, 가로-방향축으로는 고받음각 이탈제한기, 가로축 명령제한기, 방향축 조종사 명령제한기 및 스핀방지기가 설계되어 있다. 본 논문에서는 T-50 에 적용되어 있는 고받음각 제어법칙을 소개하며, 고받음각 비행시험을 통하여 항공기 안정성에 관한 연구를 수행하였다.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2002년도 추계학술대회
• /
• pp.45-57
• /
• 2002

Since a new entrant in the telecommunications market requires time in order to construct its own network, a requirement on the incumbent operator to implement carrier selection and pre-selection can enable a new entrant to immediately attract customers and earn revenue. Carrier selection can normally be accomplished in two ways, on a call-by-call basis or through carrel pre-selection. Call-by-call selection allows customers to choose a new entrant rather than the incumbent carrier using a specific code designated to the new carrier each time a call is made. Carrier Pre-Selection, on the other hand, allows customers directly connect to the network of one provider to have access automatically to another company's services when they pick up the phone to make certain types of calls. The carrier pre-selection option is generally considered to be a second regulatory step following the implementation of the call-by-call carrier selection option. Carrier pre-selection with the ability to override on a call-by-call basis for long distance, international, local, and fixed-to-mobile calls has now been implemented in many EU countries. This paper attempts to identify the issues in introducing CPS and to draw policy implications from other countries' experiences.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권1호
• /
• pp.62-66
• /
• 2011

Introduction: Endoscope-assisted open reduction and internal fixation (EAORIF) reduces the amount of facial scaring, but limitations, such as the possibility to convert to the open technique and the large learning curve, remain. Materials and Methods: The medical records of 19 patients diagnosed as lateral overridden subcondyle fractures and treated with endoscope-assisted open reduction and internal fixation at Yonsei University Health System from December 2006 to August 2010 were reviewed. Results: 11 patients underwent temporary discomfort or pain such as limitation of mouth opening, temporomandibular joint discomfort, lip paresthesia or facial weakness, but the symptoms disappeared within 3 months. There was no severe long-term complication except 2 patients with re-fractures of operated subcondyles. Conclusion: Subcondyle fracture with lateral overridden proximal segment is a better indication of endoscope-assisted open reduction and internal fixation than a condylar head/neck fracture, or medial overridden subcondyle fracture: allowing an anatomic reduction.