• The Research Journal of the Costume Culture
• /
• v.22 no.5
• /
• pp.670-687
• /
• 2014

This study focused on Jungchimak (coats with side slits) which was typically worn by men in the mid and late Joseon Dynasty. It was done research by examining the case of wearing Jungchimak centering on literature and paintings and analyzing its changes in terms of its form based on the relics that have been found in order to suggest the standard for the evaluation of the period of Jungchimak. Results are as follows. First, men who wore Jungchimak were the king, crown prince and Aristocratic under the official uniform or other robes or as ordinary clothes and shroud. Second, Jungchimak for king was mostly made of Dan (satin damask) and mostly jade green & navy in color, and it commonly used dragon pattern, cloud and treasure pattern, or grape pattern. The fabric used to make Jungchimak for crown prince was Dan & Ju (coarse-finished silk) and puple, green, jade green & navy in color. The fabric used to make Jungchimak for Aristocratic was Ju and indigo or white in color. Third, 251 relics have been announced until now. Most of them were made of silk fabric and had cloud and flower patterns. Fourth, Jungchimak showed changes through time in terms of collar and sleeve shapes, the ratio of armhole to sleeve opening, Geotseop (panel sewn on front opening for overlapping), Dang and Mu (side panel), the ratio of the total length of outer collar to the length of side slits, and the ratio of chest size to the width of lower end.

• Transactions of Materials Processing
• /
• v.16 no.8
• /
• pp.603-613
• /
• 2007

This paper is concerned with joining of thin metal sheets by single stroke clinching process. This method has been used in sheet metal work as it is a simple process and offers the possibility of joining similar-dissimilar thin sheet metals. Clinching generates a joint by overlapping metal sheets deforming plastically by punching and squeezing sequence. AA 5754 aluminum alloy of 0.5 mm thick sheets have been selected as a modal material and the process has been simulated under different process conditions and the results have been analyzed in terms of the quality of clinch joints which are influenced mainly by tool geometries. The rigid-plastic finite element method is applied to analyses in this paper. Analysis is focused mainly on investigation of deformation and material flow patterns influenced by major geometrical parameters such as die diameter, die depth, groove width, and groove corner radius, respectively. To evaluate the quality of clinch joints, four controlling or evaluation parameters have been chosen and they are bottom, neck thickness of bottom and top sheets, and undercut thickness, respectively. It has been concluded from the simulation results that the die geometries such as die depth and diameters are the most decisive process parameters influencing on the quality of clinch joints, and the bottom thickness is the most important evaluation parameter to determine if the quality of clinch joints satisfies the demand for industrial application.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3771-3776
• /
• 2010

The dynamics of the $CN^-$-ligated ferric cytochrome c (CytcCN) in $D_2O$ at 283 K following Q-band photoexcitation at 575 nm was observed using femtosecond time-resolved vibrational spectroscopy. The equilibrium vibrational spectrum of the CN stretching mode of CytcCN shows two overlapping bands: one main band (82%) at $2122\;cm^{-1}$ with $23\;cm^{-1}$ full width at half maximum (fwhm) and the other band (18%) at $2116\;cm^{-1}$ with $7\;cm^{-1}$ fwhm. The time-resolved spectra show bleaching of the CN fundamental mode of CytcCN and two absorption features at lower energies. The bleach signal and both absorption features are all formed within the time resolution of the experiment (< 200 fs) and decay with a life time of 1.9 ps. One transient absorption feature, appearing immediately red to the bleach signal, results from the thermal excitation of low-frequency modes of the heme that anharmonically couple to the CN fundamental mode, thereby shifting the CN mode to lower energies. The shift of the CN mode decays with a lifetime of 2 ps, equivalent to the time scale for vibrational cooling of the low-frequency heme modes. The other transient absorption feature, which is 3.3 times weaker than the bleach signal and shifted $27\;cm^{-1}$ toward lower energies, is attributed to the CN mode in an electronically excited state where the CN bond is weakened with a lowered extinction coefficient. These observations suggest that photoexcited CytcCN mainly undergoes ultrafast radiationless relaxation, causing photo-deligation of $CN^-$ from CytcCN highly inefficient. As also observed in $CN^-$-ligated myoglobin, inefficient ligand photodissociation might be a general property of $CN^-$-ligated ferric hemes.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.154-162
• /
• 2011

The KOrea Multi-Purpose Satellite-3 (KOMPSAT-3) provides 0.7 m Ground Sample Distance (GSD) panchromatic image and 2.8 m GSD multi-spectral image data for various applications. The KOMPSAT-3 system data will be applied in the field of earth observations, covering land, sea, coastal zones, and Geographic Information Systems (GIS). In order to keep the swath width of 15km at nadir view of KOMPSAT-3, CCD consist of approximately 24,020 pixels excluding 20 dark pixels at both sides and has overlap region. Because there are no CCD-line sensors with a pixel size of $7{\mu}m$, the field of view is separated into 2 parts and imaged on 2 detectors, each with 12,080 pixels. Therefore, 2 detectors have different geometric characteristic. This paper provides image simulation for geometric characteristics analysis of overlapping area of KOMPSAT-3 using KOMPSAT-2 image data.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.6
• /
• pp.707-715
• /
• 2018

Objective : To investigate the potential risk of approach-related complications at different access angles in minimally invasive lateral lumbar interbody fusion. Methods : Eighty-six axial magnetic resonance images were obtained to analyze the risk of approach-related complications. The access corridor were simulated at different access angles and the potential risk of neurovascular structure injury was evaluated when the access corridor touching or overlapping the corresponding structures at each angle. Furthermore, the safe corridor length was measured when the corridor width was 18 and 22 mm. Results : When access angle was $0^{\circ}$, the potential risk of ipsilateral nerve roots injury was 54.7% at L4-L5. When access angle was $45^{\circ}$, the potential risk of abdominal aorta, contralateral nerve roots or central canal injury at L4-L5 was 79.1%, 74.4%, and 30.2%, respectively. The length of the 18 mm-wide access corridor was largest at $0^{\circ}$ and it could reach 44.5 mm at L3-L4 and 46.4 mm at L4-L5. While the length of the 22 mm-wide access corridor was 42.3 mm at L3-L4 and 44.1 mm at L4-L5 at $0^{\circ}$. Conclusion : Changes in the access angle would not only affect the ipsilateral neurovascular structures, but also might adversely influence the contralateral neural elements. It should be also noted to surgeons that alteration of the access angle changed the corridor length.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.3
• /
• pp.292-296
• /
• 2022

(La_0.5Nd_0.2Sr_0.3)MnO₃ specimens were prepared by a solid-state reaction. In all specimens, X-ray diffraction patterns of an orthorhombic structure were shown. The fracture surfaces of (La_0.5Nd_0.2Sr_0.3)MnO₃ specimens showed a transgranular fracture pattern be possibly due to La ions (0.122 nm) as a perovskite A-site dopant substituting for Nd ions (0.115 nm) having a small ionic radius. The full-width at half maximum (FWHM) of the Mn 2p XPS spectra showed a value greater than that [8] of the single valence state, which is believed to be due to the overlapping of Mn²⁺, Mn³⁺, and Mn⁴⁺ ions. The dependence of Mn 2p spectra on the Mn³⁺/Mn⁴⁺ ratio according to sintering time was not observed. Electrical resistivity resulted in the minimum value of 100.7 Ω-cm for the specimen sintered for 9 hours. All specimens show a typical negative temperature coefficient of resistance (NTCR) characteristics. In the 9-hour sintered specimen, TCR, activation energy, and B25/65-value were -1.24%/℃, 0.19 eV, and 2,445 K, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.715-720
• /
• 2016

This paper proposes a PWM (Pulse Width Modulation) voltage mode DC-DC step-up converter for portable devices. The converter, which is operated with a 1 MHz switching frequency, is capable of reducing the mounting area of passive devices, such as inductor and capacitor, and is suitable for compact mobile products. This step-up converter consists of a power stage and a control block. The circuit elements of the power stage are an inductor, output capacitor, MOS transistors Meanwhile, control block consist of OPAMP (operational amplifier), BGR (band gap reference), soft-start, hysteresis comparator, and non-overlap driver and some protection circuits (OVP, TSD, UVLO). The hysteresis comparator and non-overlapping drivers reduce the output ripple and the effects of noise to improve safety. The proposed step-up converter was designed and verified in Magnachip/Hynix 0.18um 1-poly, 6-metal CMOS process technology. The output voltage was 5 V with a 3.3 V input voltage, output current of 100 mA, output ripple less than 1% of the output voltage, and a switching frequency of 1 MHz. These designed DC-DC step-up converters could be applied to the Personal Digital Assistants(PDA), cellular Phones, Laptop Computer, etc.

• Journal of the Korean Society of Costume
• /
• v.19
• /
• pp.209-240
• /
• 1992

The costume of any nation is an attribute of a culture. This study concerns chinese and Mongolian costume's 'collar' form according to the observation of some reports about import folk materials and the pictures of the genuine objects, the author has investigated and rearranged them focusing on 13th Century's. 1. Traditional OverCoat or National costume on the poing of won dynasty in china such as Jacket, Coat, Mantle for making classical matching color, lacing, pearl pieces, and all costume shall be properly decorated and disigned. The example, Chinese Women's Gown and Double Jacket, on top of alignment of plaid, focus shall be placed on chinese classical form and color-matching, such as flowers and bireds, butterflies, made wishing ornaments, which shall be either hand painted or embroidered on collars, fronts, sleeves openings, and lower portion of gown. 2. Mongolian Costume, the stone status of a person, are seen at the territory of the Republic of Mongolia was a powerful country of Asia. So during the Mongolian Empire a lot of Missions from many countries came to kharakorom for establishing official relations between Mongolia and a country represented by mission. In particularly, the costume of mongols on the point of Chinggis khan Empire which the upper clothes in cluded ; a several kinds of the Caftan as compared with in Korea as to material (Silk caftan, Cotton Caftan, Fur Caftan) with closing to the right due to overlapping and Stand-up-Shawl Collars will pancho style & Round or V Neckline. 3. As compared with in Korea it is said that this a sort of Simui was brought in prior to the middle of Koryeo dynasty. Korean Simui system was complied with chinese system through confucian domestic behaviour. This was respected for court dress of confucian scholars, as it was, Chumri can ordinary dress of schloars) and Hakchangui ( a uniform of confucian student). Generally its form or shape of the outer lapels of Korean jacket were used together Squar-Tray-Collar. In late Yi-dynasty the inside collar length was longer than the outside collar length and the width of the collar was gradually narrow. And so the Traditional costume's outer collar of Jacket and OverCoat became small while the width and length of breast-tie became large. The same thing as the form of the collar on these days had been appeared by the design method or adjust one's dress. Therefore the form of collar in the china and Mongolian Traditional OverCoat & National Costume is fix arranged according to Stand up Collar, Without Collar, Clothing to the Right, Central opening, Horizontal Row of Button with Round or V Neckline and so on.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.146-165
• /
• 2022

The purpose of this study is to identify differences in the formative characteristics and system of Jobok by comparing the three relics Ui, Sang, and Daedae, which comprised Jeon-Sik's Jobok, with the data in the literature and five excavated Jobok relics, Sin Kyung-yu, Kwon-Woo, Hwasan-Gun, Milchang-Gun, and Lee Ik-jeong, from the 17th and 18th centuries. Jeon-Sik'sJobok was designated as a Gyeongbuk tangible cultural heritage, Sangju JeonSik Jobok and Crafts, in 2021. The three components of Jeon-Sik's Jobok are valuable as historical data since they are the oldest relics confirming colors. Regrettably, the edging fabric of the Ui made of red twill was mostly lost, with only traces remaining. Based on records, it was presumed that the edging fabric was black. It was confirmed that white decorative lines were yet to be used. In Jeon Sik's Sang, only the three front widths and one rear width remain, but the shape of the four rear widths can be inferred, and the creases were held only at the waist. Eighteenth-century Sang was connected at intervals at the end of the waist. Seventeenth-century Sang was connected with a slight overlapping of the rear Sang below the front Sang; therefore, it is assumed that Jeon Sik's Sang was also connected by overlapping the rear by more or less than 5cm below the front. After Hwasan-gun, the Sang was first made using black lines, then white lines were inserted, and, finally, it was pleated from the waist to the hem. The Daedae made the Yo and the Sin by folding the corners to form a 冂 shape with a single long band. The white Ju(紬) and the green yumunsa were used for the Daedae and the edges. This matches the color of the Daedae seen in the Jobok portraits of Milchang-gun, Lee Ik-jeong, and Jeong Hwi-ryang from the 18th century. In the 17th century, the Daedae made the Yo and the Sin by folding a long band like the Daedae of Jeon-Sik. After the 18th century, the Yo and the Sin were made separately and connected. To tie the Daedae to the waist, thin straps were attached at both ends. The relics of Jeon-Sik can be evaluated as reflecting the 17th-century Jobok system in terms of color and shape. Furthermore, it can be said that they are important historical data complementing the insufficient or inaccurate records of the Gukjoolyeui-seolye and Gyeongguk-daejeon.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.298-301
• /
• 2015

A new Hibiscus syriacus variety, 'Dasom', was developed by radiation breeding using gamma ray exposure at the Korea Atomic Energy Research Institute (KAERI). Seeds of the original variety, 'Hongsun', were collected in 1993. These seeds were irradiated at 100 Gy dose and $M_1$ seeds were planted in a field of the KAERI in 1994. Lines with preferred flower color that were going to be used for street trees were initially selected in 1998. Analyses of characteristics were conducted from 2005 to 2010. The 5-year-old 'Dasom' plants were approximately 106 cm in height and averaged 19 branches, and thus were suitable for street trees. The flowers of 'Dasom' were semi-double type with medium red color and red eye spots. Petal length and width were about 4.0 cm and 3.3 cm, respectively. Flower diameter was slightly small, at about 5.8 cm, because of highly overlapping petals. The flowering period of 'Dasom' was about 105 days, which was 6 days shorter than that of the original variety, 'Hongsun'. However, the main charactersistics of 'Dasom' including leaf shape were similar to those of the original variety, 'Hongsun'.