• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3C
• /
• pp.251-256
• /
• 2009

In this paper, we propose a new method with the improved continuity performance of overlap and add speech signal synthesis method using damping harmonic amplitude parameter. The existing method uses the average value of past and current parameters for the sinusoidal amplitude used as the weight of phase error function. But, the proposed method extracts the more accurate sinusoidal amplitude by using a correlation between the original signals and the synthesized signals for the sinusodal amplitude used as the weights. To verify the performance of the proposed method, we observed the average differential error value between the synthesized signals.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.11
• /
• pp.1633-1639
• /
• 2013

In a section of AC electric railway, a phase between the sections is different although voltage levels supplied from substations are the same. Therefore, section insulators have been installed to electrically divide between the sections. Two differenet types of section insulator, namely an overlap type and insulator type, are used. In Korean high-speed lines, overlap type section insulator has been adopted. And, insulator type is used in conventional line. The overlap type has the advantage of having no speed limit, but has the disadvantage of requiring long section length. However, the insulator type has the advantage of section length, but also has the disadvantage of having speed limit. In Korean conventional line, an insulator type one relies on the import and there is some problem with wear. In this study, we developed the insulator type section insulator which adopts Teflon tube insulation material. The Teflon material has advantage of the excellent electrical characteristics and wear-resistance characteristics for a longer expected life than that made of existing FRP. In order to compare wear characteristics between the materials, wear tests with reciprocal wear tester are performed. And dynamic behavior tests between the insulators and pantograph are also performed for showing its better dynamic characteristics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5574-5591
• /
• 2017

Inspired by the idea of Artificial Immune System, many researches of wireless sensor network (WSN) intrusion detection is based on the artificial intelligent system (AIS). However, a large number of generated detectors, black hole, overlap problem of NSA have impeded further used in WSN. In order to improve the anomaly detection performance for WSN, detector generation mechanism need to be improved. Therefore, in this paper, a Differential Evolution Constraint Multi-objective Optimization Problem based Negative Selection Algorithm (DE-CMOP based NSA) is proposed to optimize the distribution and effectiveness of the detector. By combining the constraint handling and multi-objective optimization technique, the algorithm is able to generate the detector set with maximized coverage of non-self space and minimized overlap among detectors. By employing differential evolution, the algorithm can reduce the black hole effectively. The experiment results show that our proposed scheme provides improved NSA algorithm in-terms, the detectors generated by the DE-CMOP based NSA more uniform with less overlap and minimum black hole, thus effectively improves the intrusion detection performance. At the same time, the new algorithm reduces the number of detectors which reduces the complexity of detection phase. Thus, this makes it suitable for intrusion detection in WSN.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.203-212
• /
• 2016

Dose differences between three-dimensional (3D) and four-dimensional (4D) doses could be varied according to the geometrical relationship between a planning target volume (PTV) and an organ at risk (OAR). The purpose of this study is to evaluate the correlation between the overlap volume histogram (OVH), which quantitatively shows the geometrical relationship between the PTV and OAR, and the dose differences. 4D computed tomography (4DCT) images were acquired for 10 liver cancer patients. Internal target volume-based treatment planning was performed. A 3D dose was calculated on a reference phase (end-exhalation). A 4D dose was accumulated using deformation vector fields between the reference and other phase images of 4DCT from deformable image registration, and dose differences between the 3D and 4D doses were calculated. An OVH between the PTV and selected OAR (duodenum) was calculated and quantified on the basis of specific overlap volumes that corresponded to 10%, 20%, 30%, 40%, and 50% of the OAR volume overlapped with the expanded PTV. Statistical analysis was performed to verify the correlation with the OVH and dose difference for the OAR. The minimum mean dose difference was 0.50 Gy from case 3, and the maximum mean dose difference was 4.96 Gy from case 2. The calculated range of the correlation coefficients between the OVH and dose difference was from -0.720 to -0.712, and the R-square range for regression analysis was from 0.506 to 0.518 (p-value <0.05). However, when the 10% overlap volume was applied in the six cases that had OVH value ${\leq}2$, the average percent mean dose differences were $34.80{\pm}12.42%$. Cases with quantified OVH values of 2 or more had mean dose differences of $29.16{\pm}11.36%$. In conclusion, no significant statistical correlation was found between the OVH and dose differences. However, it was confirmed that a higher difference between the 3D and 4D doses could occur in cases that have smaller OVH value.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.131-133
• /
• 1998

본 연구에서는 대표적인 몇가지 경우의 전류크기와 회전자 위치각에 따른 토오크값을 직접 측정하고, 이들 값으로부터 연속적인 토오크 값을 얻은 후, 이를 이용하여 각 상간 토오크의 중첩을 고려한 평활한 토오크를 발생할 수 있는 전류의 형상을 도출하였다. 이러한 순시적인 전류의 크기를 제어기 위한 순시접압은 PWM으로 제어하였다.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.609-614
• /
• 2013

Extended H$\ddot{u}$ckel tight-binding band structure calculations are used to address the chemical bonding and elastic properties of $Zr_2AC$ (A=Al, Si, P, and S). Elastic properties are interpreted by analyzing the density of states and the crystal orbital overlap population for the respective phases. Our results show that the bulk modulus of these ternary compounds is determined by the strength of Zr-A bonds.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.1
• /
• pp.10-15
• /
• 1987

The results of an ab initio (6-31G) molecular orbital calculation of the dipole moment derivatives and gas phase IR intensities of difluoromethane are reported. The results are compared with corresponding values obtained from a CNDO calculation. The directions of the dipole derivatives calculated by the two methods agree very well, whereas the intensities differ significantly. The results are also analyzed for the charge-charge flux-overlap electronic contributions to the dipole derivatives.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.174-179
• /
• 1987

The results of an ab initio (6-31G) molecular orbital calculations of the dipole moment derivatives and gas phase IR intensities in $CH_3F$ and $CF_4$ are reported. The results are compared with corresponding values obtained from a CNDO calculation. We have also analyzed the theoretical polar tensors into the charge, charge flux, and overlap contributions. The effective term charges of hydrogen atom appeared to be transferable among the fluoromethane molecules.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.69-76
• /
• 2023

A high-quality audio/voice codec using the MDCT/IMDCT process can perfectly restore the current frame through an overlap-add process with the previous frame. In the overlap-add process, an algorithm delay equal to the frame length occurs. In this paper, we propose a MDCT/IMDCT process that reduces algorithm delay by using a variable phase shift in MDCT/IMDCT process. In this paper, a low-delay audio/speech codec was proposed by applying the low delay MDCT/IMDCT algorithm to the ITU-T standard codec G.729.1 codec. The algorithm delay in the MDCT/IMDCT process can be reduced from 20 ms to 1.25 ms. The performance of the decoded output signal of the audio/speech codec to which low-delay MDCT/IMDCT is applied is evaluated through the PESQ test, which is an objective quality test method. Despite of the reduction in transmission delay, it was confirmed that there is no difference in sound quality from the conventional method.

• Journal of the Korean Society for Railway
• /
• v.18 no.1
• /
• pp.25-32
• /
• 2015

It has been subject to question whether a conventional traffic signal controller can support efficient operation at grade intersections in which vehicles and tram lines cross concurrently. This study proposes a list of functional requirements for a traffic signal controller to support effective operation of trams at such an intersection. The considered details includes the combinations of geometric conditions at which vehicle, bus, and tram lines are aligned, the types of exclusive tram signals, and the combinations of various signal phases, including exclusive tram phases, which are currently undefined in the nation. The results suggest that the controller should be capable of dealing with the NEMA standard overlap relays and a quadruple-ring phase representation scheme.