• 제목/요약/키워드: Overlap Angle

검색결과 59건 처리시간 0.026초

팔꿉관절 측방향 일반촬영에서 아래팔뼈 각도 변화에 따른 영상 분석 : 위팔뼈 위관절융기와 팔꿉관절 평가 (Image Analysis of Angle Changes in the Forearm during Elbow Joint Lateral General Radiography: Evaluation of Humerus Epicondyle and Elbow Joint)

  • 신효수;장혜원;박종배;이기백
    • 한국방사선학회논문지
    • /
    • 제17권4호
    • /
    • pp.607-614
    • /
    • 2023
  • 팔꿉관절 측방향 일반촬영 검사 시 위팔뼈 양측 위관절융기의 정확한 겹침과 팔꿉관절의 적절한 분리는 매우 중요하다. 그러나 팔꿉관절의 복잡한 해부학적인 구조로 인해서 최적의 영상을 획득하기 어려워 반복적인 검사가 시행되고 있다. 따라서 본 연구는 팔꿉관절 측방향 일반촬영 검사 시 정확한 영상을 획득할 수 있는 환자의 각도를 조사하고자 하였다. 연구 대상은 20명의 환자로 정해진 연구 절차에 따라 시행되었다. 먼저 아래팔과 테이블 사이의 0°의 각도에서 X선을 수직 입사하여 영상을 획득하였다(대조군). 그 후, 팔꿉관절의 측방향 영상이 부적절하다고 판단될 경우 5° 및 10°의 기울기를 가진 스티로폼 지지대를 이용하여 아래팔의 각도를 조정하여 영상을 획득하였다(실험군). 평가 방법으로는 두 명의 평가자가 리커트 5점 척도를 통해 영상을 평가했고, 평가에 대한 신뢰성은 크론바흐 알파 값을 제시하였다. 결과적으로 처음 검사(대조군)에서 양측 위관절융기의 겹침과 팔꿉관절의 분리가 적절하지 않은 환자들은 아래팔뼈와 테이블 사이에 10° 각도를 설정하였을 때 가장 좋은 영상을 획득할 수 있었다. 이에 대한 정성적 평가 점수는 0°에서 1.6±0.8점, 5°에서 2.7 ± 0.8점, 10°에서 4.4 ± 1.3점이었고, 0°, 5°, 10° 각도에 대한 신뢰도 분석 결과 크론바흐 알파 값은 각각 0.867, 0.697 및 0.922였다. 결론적으로 기존의 검사 자세와 X선 입사 방식을 사용하여 정확한 영상을 얻을 수 없는 경우에는 아래팔과 테이블 사이의 각도를 10°로 설정한 후 우선적으로 영상을 획득하고 차츰 각도를 줄여가면서 영상을 획득한다면 반복 검사의 횟수를 줄이면서 최적의 영상을 얻을 수 있을 것으로 판단된다.

모형시험을 통한 복열 마이크로파일의 설치조건에 따른 수평 지지력 변화 (Variations of Lateral Bearing Capacity of 2-row Micropile with Installation Conditions by Model Test)

  • 황태현;김무연;이영생
    • 한국지반공학회논문집
    • /
    • 제36권11호
    • /
    • pp.35-49
    • /
    • 2020
  • 마이크로파일의 수평 지지력은 파일의 본 수, 설치 각도와 간격 등 설치조건에 좌우된다. 마이크로파일에 관한 기존 연구는 연직 지지특성에 대한 평가와 효과적인 설치방법의 제안 등에 국한되어 있고, 파괴 모드와 같은 파괴 메커니즘 등에 대한 연구는 거의 없는 실정이다. 또한 대부분의 수평 지지력에 관한 연구도 단열 마이크로파일(1-row micropile)에 관한 것이다. 이에 본 연구에서는 파일의 설치 길이, 각도, 간격 등 설치조건을 달리한 경우 복열 마이크로 파일(2-row micropile)의 거동 및 지지특성을 평가하기 위하여 모형시험을 수행하였다. 모형시험결과, 설치 각도 θ > 0°인 경우(비교차 설치)의 복열 마이크로파일의 수평 지지력은 파일의 간격에 좌우되며, 설치 각도 θ = +30°인 조건이 지지력 증대에 가장 효과적이었다. 또한 설치 각도 θ < 0°인 경우(교차 설치)에는 파일의 간격과 각도에 좌우되며, 설치 각도 θ = -15°인 조건이 지지력 증대에 가장 효과적인 것으로 나타났다.

네트워크 RTK 무인기의 항공삼각측량 정확도 평가 (Accuracy Assessment of Aerial Triangulation of Network RTK UAV)

  • 한수희;홍창기
    • 한국측량학회지
    • /
    • 제38권6호
    • /
    • pp.663-670
    • /
    • 2020
  • 본 연구에서는 건물이 혼재한 준 도심 지역에서 발생할 수 있는 재난/재해를 가정하여 네트워크 RTK (Real Time Kinematic) 측위가 가능한 무인기를 이용한 항공삼각측량의 정확도를 평가하였다. 검사점 측위의 신뢰성을 확보하기 위해 검사점을 건물의 옥상에 설치하여 네 시간 이상의 GNSS (Global Navigation Satellite System) 정적 측위를 수행하였다. 객관적인 정확도 평가를 위해 소프트웨어에서 자동으로 인식 가능한 코드화된 대공 타겟을 사용하였다. 무인기에서는 네트워크 RTK 측위의 일종인 VRS (Virtual Reference Station) 방식을 이용하여 영상 취득 당시 카메라의 3차원 좌표를 측정하였고, IMU (Inertial Measurement Unit)와 짐벌 회전각 측정을 통해 카메라의 3축 회전각을 측정하였다. Agisoft Metashape를 이용하여 내·외부 표정요소를 추정·갱신한 결과, 항공삼각측량의 3차원 RMSE (Root Mean Square Error)는 영상의 중복도와 촬영 각도의 조합에 따라 크게는 0.153 m에서 작게는 0.102 m로 나타났다. 더욱 높은 수준의 항공삼각측량 정확도를 확보하기 위해서는 연직 영상의 중복도를 높이는 것이 일반적이나 경사 영상을 추가하는 것이 효과적인 것으로 나타났다. 따라서 대응 단계의 재난/재해 현장에서 긴급하게 무인기 매핑을 수행할 경우 중복도를 높이기 보다는 경사 영상도 함께 취득할 필요가 있다.

경추 정면 검사에서 방사선 입사각에 관한 연구 (A Study of Radiation Incidence Angle in Anteroposterior Cervical Vertebra Examination)

  • 정성운;임청환;한범희;정홍량;주영철;박미자
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제35권2호
    • /
    • pp.83-92
    • /
    • 2012
  • 경추 정면 방사선검사시 하악골, 후두골의 겹침방지, 경추 추체의 배열 및 관절의 형태 등을 관찰하기 위하여 X선 입사각을 머리 방향으로 $15{\sim}20^{\circ}$를 주고 있는 것이 보편적이다. 하지만 한국인의 체형에 맞는 입사각에 대한 연구는 거의 이루어지지 않고 있다. 이에 본 연구에서는 한국인에 적합한 입사각을 찾고, 방법을 제시하는데 목적이 있다. 입사각을 측정하기 위하여 서산에 위치한 S병원을 내원한 환자 1,044명을 대상으로 하였으며, 제 2번~제 5번 경추의 길이, 피사체-영상판 거리(OID), 제2번경추(axis)의경사도, 초점-영상판 간거리(FID)를 측정하였으며, 연령대 성별에 대한 평균값을 측정하여 적용공식에 의하여 입사각을 산출하였다. 경추 제2번~제5번의 평균길이는 6cm 이였으며, 10대부터 20대까지는 경추의 길이가 커지고 30대 이후로는 경추의 길이가 작아졌으며, 남성과 여성의 차이는 약 1cm 차이가 나타났다(p<.001). OFD는 연령대, 성별과 상관없이 거의 같은 값이 측정이 되었다. 제2번 경추(axis)의 경사도는 10대와 20대는 경사도가 증가하였지만, 30대 이후로는 작게 나타났다. 또한 남성과 여성은 약 $2^{\circ}$차이가 났다(p<.001). FID의 측정 결과, 연령대, 성별과 상관없이 거의 같은 값이 측정되었으며, 이 값으로 입사각을 측정한 결과, 10대는 $15.9^{\circ}$, 20대 $16.9^{\circ}$, 30대 $16.6^{\circ}$, 40대 $16.2^{\circ}$, 50대 $15.9^{\circ}$, 60대 $14.5^{\circ}$로 측정되었다. 10대와 20대까지 입사각이 증가하였지만, 30대 부터는 입사각이 작게 나타났다. 또한 10대는 남성과 여성이 같은 값으로 측정이 되었고, 20대부터는 남성과 여성이 $2^{\circ}$ 차이가 나타났다. 입사각과 제 2번~제 5번 경추의 길이측정, OID, 제 2번 경추의 경사도, FID와의 상관관계를 실시하였고, 입사각과 모두 유의한 상관관계가 나타났다(p<.001). 본 연구에서 경추의 평균 길이, OID, FID, 제2번 경추(axis)의 경사도에 따라서 입사각이 다르게 나타났고, 성별과 연령에 따라 입사각이 다른 것을 알 수 있었다. 그러므로 경추 정면검사 시 연령, 성별을 고려하여 입사각을 설정하면서 검사를 시행하여야 함이 사료되며, 향후 경추검사의 입사각을 설정할 때 참고 자료로 이용될 것으로 기대된다.

DSP를 이용한 Switched Reluctance Motor의 디지털 제어기에 관한 연구 (A Research on the Digital Controller of Switched Reluctance Motor Using DSP)

  • 박성준;박한웅;김정택;추영배;이만형
    • 전력전자학회논문지
    • /
    • 제3권3호
    • /
    • pp.263-272
    • /
    • 1998
  • 본 논문은 자기적 비선형성과 상간의 토오크중첩을 고려하여 맥동토오크를 최소화시킬 수 있는 제어기법을 제시하고 이를 DSP를 이용하여 구현한 SRM의 구동시스템에 대하여 기술하였다. 이를 위해 먼저 몇 단계의 상전류 크기에 대한 회전자 위치별 인덕턴스값과 발생토오크의 크기를 실측한 후 이들 대표값으로부터 신경회로망을 사용하여 제어에 필요한 충분히 정밀한 값들을 추론한다. 또한 각 상간의 토오크중첩을 고려하여 총합 발생토오크의 맥동성분의 최소화되도록 상별 지령토오크 파형을 설정한다. 회전자위치와 상전류를 검출하고, 이 검출값과 추론된 토오크데이터를 이용하여 구한 토오크 값이 지령토오크를 추종하도록 델타변조기법에 의한 제어기를 구성한다. 이러한 제어방식을 실시간으로 처리하고, 제어기의 신뢰성을 높이기 위해 DSP를 사용하였다.

  • PDF

고개의 조망특성에 관한 연구 - 부산광역시를 대상으로 - (A Study on Characteristics of Prospect from the Mountain Pass - Focusing on Mountain Passes Located in Busan -)

  • 강영조;조승래;김희정
    • 한국조경학회지
    • /
    • 제33권4호
    • /
    • pp.22-32
    • /
    • 2005
  • The purpose of this study is to analyze characteristics of prospect from the mountain pass by investigating relations between the type of mountain pass and object overlooked from the mountain pass. For the purpose, this researcher selected and surveyed 44 mountain passes located in Busan, except in Gangseo-gu lesion. According to their locational characteristics, the mountain passes were classified into three types, 'sanmok'(formed between mountain peaks), 'sanheori'(formed on the mountainside) and 'sanmaru'(formed at the tip of the mountain peak). Out of the total 44 mountain passes, 22 were 'sanheori' in type. In the same type, mountain passes mostly had a prospect providing the overlap of downtown and mountain areas. The researcher examined the sight distance and dip of object to be viewed from the mountain pass, determining relations between the object and the mountain pass. When overlooked from mountain passes in Busan, most objects are distributed between $-3^{\circ}\;and\;-1^{\circ}$ in an angle of depression within the sight distance from 0.5km to 14km. Mountain passes are valuable as a post that is very important in prospecting scenes. But they are now in crisis. They are being gradually disappeared because of development projects. Finally, the researcher hopes that the study makes recognizing the value of the mountain pass and contributes to preserve the mountain pass as an important post of view point when its region is later developed.

선박 골블록의 경사 필렛 이음부의 적정 용접조건 (I) (Optimal Welding Condition for the Inclined and Skewed Fillet Joints ill the Curved Block of a Ship (I))

  • 박주용
    • 한국해양공학회지
    • /
    • 제18권6호
    • /
    • pp.79-83
    • /
    • 2004
  • The curved blocks which compose the bow and stem of a ship contain many skewed joints that are inclined horizontally and vertically. Most of these joints have a large fitness error and are continuously changing their form and are not easily accessible. The welding position and parameter values should be appropriately set in correspondence to the shape and the inclination of the joints. The welding parameters such as current, voltage, travel speed, and melting rate, are related to each other and their values must be in a specific limited range for the sound welding. These correlations and the ranges are dependent up on the kind and size of wire, shielding gas, joint shape and fitness. To determine these relationships, extensive welding experiments were performed. The experimental data were processed using several information processing technologies. The regression method was used to determine the relationship between current voltage, and deposition rate. When a joint is inclined, the weld bead should be confined to a the limited size, inorder to avoid undercut as well as overlap due to flowing down of molten metal by gravity. The dependency of the limited weld size which is defined as the critical deposited area on various factors such as the horizontally and vertically inclined angle of the joint, skewed angle of the joint, up or down welding direction and weaving was investigated through a number of welding experiments. On the basis of this result, an ANN system was developed to estimate the critical deposited area. The ANN system consists of a 4 layer structure and uses an error back propagation learning algorithm. The estimated values of the ANN were validated using experimental values.

Ground Tracking Support Condition Effect on Orbit Determination for Korea Pathfinder Lunar Orbiter (KPLO) in Lunar Orbit

  • Kim, Young-Rok;Song, Young-Joo;Park, Jae-ik;Lee, Donghun;Bae, Jonghee;Hong, SeungBum;Kim, Dae-Kwan;Lee, Sang-Ryool
    • Journal of Astronomy and Space Sciences
    • /
    • 제37권4호
    • /
    • pp.237-247
    • /
    • 2020
  • The ground tracking support is a critical factor for the navigation performance of spacecraft orbiting around the Moon. Because of the tracking limit of antennas, only a small number of facilities can support lunar missions. Therefore, case studies for various ground tracking support conditions are needed for lunar missions on the stage of preliminary mission analysis. This study analyzes the ground supporting condition effect on orbit determination (OD) of Korea Pathfinder Lunar Orbiter (KPLO) in the lunar orbit. For the assumption of ground support conditions, daily tracking frequency, cut-off angle for low elevation, tracking measurement accuracy, and tracking failure situations were considered. Two antennas of deep space network (DSN) and Korea Deep Space Antenna (KDSA) are utilized for various tracking conditions configuration. For the investigation of the daily tracking frequency effect, three cases (full support, DSN 4 pass/day and KDSA 4 pass/day, and DSN 2 pass/day and KDSA 2 pass/day) are prepared. For the elevation cut-off angle effect, two situations, which are 5 deg and 10 deg, are assumed. Three cases (0%, 30%, and 50% of degradation) were considered for the tracking measurement accuracy effect. Three cases such as no missing, 1-day KDSA missing, and 2-day KDSA missing are assumed for tracking failure effect. For OD, a sequential estimation algorithm was used, and for the OD performance evaluation, position uncertainty, position differences between true and estimated orbits, and orbit overlap precision according to various ground supporting conditions were investigated. Orbit prediction accuracy variations due to ground tracking conditions were also demonstrated. This study provides a guideline for selecting ground tracking support levels and preparing a backup plan for the KPLO lunar mission phase.

다상 유체 시스템의 다중 스케일 시뮬레이션 기법에 관한 연구 (Development of Multiscale Simulation Technique for Multiphase Fluid System)

  • 한민섭
    • 대한기계학회논문집B
    • /
    • 제34권6호
    • /
    • pp.569-577
    • /
    • 2010
  • 다상 유체 시스템에 적용할 수 있는 다중스케일 입자 시뮬레이션 기법을 개발하였다. 거시 모델과 미시모델이 만나는 경계영역에서 세가지로 구별되는 기능을 수행하도록 하였다. 먼저, 기상과 액상을 분리하여 연결하기 위해 벽을 설정하였다. 또 경계영역을 근처에서 경계의 위치를 측정하고 이것에 벽의 각도와 위치가 연동하여 접촉각 값을 미시모델에서 거시모델로 전달하게 하였다. 마지막으로, 입자의 삽입과 제거를 통해 경계영역의 질량과 온도를 거시적 조건에 맞추도록 하였다. 이 알고리즘들을 적용한 완전습윤과 부분습윤시스템들은 좋은 결합 결과를 보였다.

빔 위치 관련 제어인자가 집속이온빔 패턴 증착공정에 미치는 영향 (The Influence of Parameters Controlling Beam Position On-Sample During Deposition Patterning Process with Focused Ion Beam)

  • 김준현;송춘삼;김윤제
    • 대한기계학회논문집A
    • /
    • 제32권3호
    • /
    • pp.209-216
    • /
    • 2008
  • The application of focused ion beam (FIB) depends on the optimal interaction of the operation parameters between operating parameters which control beam and samples on the stage during the FIB deposition process. This deposition process was investigated systematically in C precursor gas. Under the fine beam conditions (30kV, 40nm beam size, etc), the effect of considered process parameters - dwell time, beam overlap, incident beam angle to tilted surface, minimum frame time and pattern size were investigated from deposition results by the design of experiment. For the process analysis, influence of the parameters on FIB-CVD process was examined with respect to dimensions and constructed shapes of single and multi- patterns. Throughout the single patterning process, optimal conditions were selected. Multi-patterning deposition were presented to show the effect of on-stage parameters. The analysis have provided the sequent beam scan method and the aspect-ratio had the most significant influence for the multi-patterning deposition in the FIB processing. The bitmapped scan method was more efficient than the one-by-one scan type method for obtaining high aspect-ratio (Width/Height > 1) patterns.