• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.615-626
• /
• 2018

To ensure a DC current path and avoid large voltage overshoot of the DC-link inductor, alternating PWM pulses in the current-source rectifier should be supplemented by overlap time, which generates an overlap current and causes input current distortion. In this study, the influence of overlap time is illustrated by comparing the AC-side current before and after overlap time is added. The overlap current distribution caused by overlap time is discussed under different modulation carriers, including triangle carrier, positive-going carrier, and negative-going carrier. The quantitative relationship between the extra harmonics of the AC-side current and overlap time is based on the Fourier analysis. Based on the commutation analysis, a new carrier modulation scheme that can restrain overlap current is proposed. A 3 kW prototype is established to verify the effectiveness of the influence of overlap time and the proposed restraining modulation scheme.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.125-131
• /
• 1979

A method for calculation of two center overlap integrals for a pair of Slater type orbitals was developed by Mulliken et al. In this method the spherical polar coordinates for a pair of Slater type orbitals located at two different points are required to be transformed into a spheroidal coordinate set for calculation of two center overlap integrals. A new method, the expansion method for spherical harmonics, in which Slater type orbitals, located at two different points, are expressed in a common coordinate system has been applied for computation of two center overlap integrals. The new method for computation of two center overlap integrals is required to translate Slater type orbitals centered at two different points into the reference point for computation of two center overlap integrals. This work has been expanded the expansion method for spherical harmonics for computation of two center overlap integrals to $|3s{\g}$, $|5s{\g}$ and $|5s{\g}$. Master formulas for two center overlap integrals are derived for these orbitals, using the general expansion formulas. The numerical values of the two center overlap integrals evaluated for a hypothetical NO molecule are in agreement with those of the previous works.

• Journal of KIISE
• /
• v.45 no.3
• /
• pp.200-210
• /
• 2018

Given a set of DNA read sequences, de novo sequence assembly reconstructs a target sequence without a reference sequence. For reconstruction, the assembly needs the overlap phase, which computes all overlaps between every pair of reads. Since the overlap phase is the most time-consuming part of the whole assembly, the performance of the assembly depends on that of the overlap phase. There have been extensive studies on the overlap phase in various fields. Among them, three state-of-the-art results for the overlap phase are Readjoiner, SOF, and Lim-Park algorithm. Recently, a rapid development of sequencing technology has made it possible to produce a large read dataset at a low cost, and many platforms for generating a DNA read dataset have been developed. Since the platforms produce datasets with different statistical characteristics, a performance evaluation for the overlap phase should consider datasets with these characteristics. In this paper, we compare and analyze the performances of the three algorithms with various large datasets.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.87-112
• /
• 2017

Overlap what images are laid on top of each other performs various purposes of artistic expressions. Especially, overlap to describe motion has been placed on lots of art fields analysing and connecting each part of motion. This kind of overlap is called as 'Locomotive overlap' and it is defined as 'Technique for multiplication to arrange simultaneously motions of single object on one screen'. Locomotive overlap was started from fine art and photography, so this static kind of it is classified as 'Static locomotive overlap'. Afterwards, film and animation succeeded static locomotion overlap and realized real dynamic locomotive overlap with moving images, so this dynamic kind of it is classified as 'Dynamic locomotive overlap'. Most of all, by Norman McLaren accomplished its own artistic value and aesthetics in locomotive overlap has been placed in the center of the history of locomotive overlap, so to analyze this work and to research before and after it will confirm context and artistic achievements of locomotive overlap. Nowdays locomotive overlap is extending its technology and dimension more and more on the strength of development of digital technology. Some of works using digital technology show new possibilities of locomotive overlap by reinterpreting original media and concept of . Ultimately, this research for locomotive overlap focusing on the analysis of confirms artistic achievements of locomotive overlap and suggests to contemplate the meaning and new possibilities of it.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.10
• /
• pp.1280-1285
• /
• 1995

In this paper the optimized overlap driving scheme for improving the reduction problem of the operating voltage range occured by the overlap driving scheme proposed precedently and increasing the contrast ratio of screen image in the simple matrix LCDs is proposed. The characteristic estimation of the proposed method was performed in a condition that the number of scan electrodes was 120 and the threshold voltage of LC pixel was 2V and the overlap rate of scan signal was varied from 0% to 40% . As a result of estimation compared with the overlap driving scheme proposed precedently, this new method was certified as a method which it could increase the operating voltage range of the LC pixel by 16% in 20% overlap condition and it's operating voltage range was also increased very much with the increase of the overlap rate. Consequently this newly proposed method was certified as a method which it could maintain the improvement effect of the operating characteristics obtained by the overlap driving scheme proposed precedently with the big improvement in the contrast ratio of screen image.

• Journal of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.117-127
• /
• 1978

Slater type orbitals, located at two different points A and B, are expressed in a common coordinate system by expanding the spherical harmonics and the radial part of these orbitals in terms of the reference point A. Master formulas for two center overlap integrals are derived, using the general expansion formulas of slater type atomic orbitals. Two center overlap integrals for $CH_4,\;H_2O,\;NH_3,\;C_2H_6\;and\;PH_3$molecules are evaluated, using master formulas for two center overlap integrals. The results are in agreement with those of two center overlap integrals of Mulliken.

• Phonetics and Speech Sciences
• /
• v.3 no.3
• /
• pp.27-33
• /
• 2011

This paper explores two articulatory characteristics of inter-consonantal coordination observed in lingual-lingual (/kt/, /ks/) and labial-lingual (/pt/) sequences. Using electromagnetic articulometry (EMMA), temporal aspects of the lip movement and lingual movement (of the tongue tip and the tongue dorsum) were examined. Three sequences (/ks/, /kt/, /pt/) were investigated in two respects: gestural overlap in C1C2 and formation duration of coronals in C2 (/t/ or /s/). Results are summarized as follows. First, in a sequence of two stop consonants gestural overlap did not vary with order contrast or a low-level motor constraint on lingual articulators. Gestural overlap between two stop consonants was similar in both /kt/ (lingual-lingual; back-to-front) and /pt/ (labial-lingual; front-to-back). Second, gestural overlap was not simply constrained by place of articulation. Two coronals (/s/ and /t/) shared the same articulator, the tongue tip, but they showed a distinctive gestural overlap pattern with respect to /k/ in C1 (/ks/ (less overlap) < /kt/ (more overlap)). Third, temporal duration of the tongue tip gesture varied as a function of manner of articulation of the target segment in C2 (/ks/ (shorter) < /kt/ (longer)) as well as a function of place of articulation of the segmental context in C1 (/pt/ (shorter) < /kt/ (longer)). There are several implications associated with the results from Korean non-assimilating contexts. First, Korean can be better explained in the way of its language-specific gestural pattern; gestural overlap in Korean is not simply attributed to order contrast (front-to-back vs. back-to-front) or a physiological motor constraint on lingual articulators (lingual-lingual vs. nonlingual-lingual). Taking all factors into consideration, inter-gestural coordination is influenced not only by C1 (place of articulation) but also C2 (manner of articulation). Second, the jaw articulator could have been a factor behind a distinctive gestural overlap pattern in different C1C2 sequences (/ks/ (less overlap) vs. /kt/ and /pt/ (more overlap)). A language-specific gestural pattern occurred with reference to a physiological motor constraint on the jaw articulator.

• Journal of Welding and Joining
• /
• v.34 no.6
• /
• pp.69-74
• /
• 2016

Because the pure titanium has superior corrosion resistance and formability compared with different material, it is widely used as material of welded heat exchanger. When the welding of heat exchanger is carried out, certain area in which welding start and end are overlapped occurs. The humping of back bead is formed in the overlap area due to partial penetration. Thus in this study, the experiments were carried out by changing the length and wave shape of overlap area, and then the weldabiliay was evaluated through the observation of microstructure, the measurement of hardness and tensile-shear strength test in the overlap area. When overlap length was 9.8mm, humping bead was suppressed. The microstructure of overlap area coarsened and its hardness increased due to remelting. As a result of tensile-shear strength test in the overlap area according to applying the wave shape control, it was confirmed that the overlap area applied wave shape control had more excellent yield strength and ductility.

• Journal of radiological science and technology
• /
• v.43 no.3
• /
• pp.161-167
• /
• 2020

This study aimed to found out the effect of patellofemoral overlap distance by changing femur thickness and center X-ray angles in Merchant method images. Based on the femur thickness, it suggested tube angle minimizes overlap. It was conducted by Merchant method, a knee tangential view, and the image was obtained by changing the thigh thickness from 14 to 20 cm and the center ray angle from 60°, 57°, 55°. The images were measured by five researchers using a method of measuring the overlap, which was designed by them. The results showed at 60°, 57°, 55° angle, the patellofemoral overlap distance resulted in 0.47±0.66 to 20.89±0.65 cm, 2.26±0.28 to 15.73±0.62 cm, 1.39 ± 0.83 to 12.49 ± 0.37 cm. However, for 57° and 55°, no overlap in thickness under 14.5 and 14 to 15.5 didn't appear. it showed high correlation between femur thickness and overlap. The difference in the mean value of overlap in each group showed a statistically significant difference (p<0.01), all were classified as independent groups in the post-hoc test. In all images, the patellofemoral overlap distance increased as the thickness increased, and at the average thickness of Korean men and women, overlap decreased when reducing center ray. When conducting Merchant tests on Koreans, it was suggested it would be useful to use 57° angle because it minimize the effects of overlap and intrusions of tibia.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.769-772
• /
• 2014

The device reliability in amorphous InGaZnO under NBS(Negative Bias Stress) and hot carrier stress with different gate overlap has been characterized. Amorphous InGaZnO thin film transistor has been measured. and is channel $width=104{\mu}m$, $length=10{\mu}m$ with gate overlap $length=0,1,2,3{\mu}m$. The device reliability has been analyzed by I-V characteristics. From the experiment results, threshold voltage variation has been increased with increasing of the gate overlap length after hot carrier stress. Also, threshold voltage variation has been decreased and Hump Effect has been observed later with increasing of the gate overlap length after NBS.