• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.10-17
• /
• 2002

In this study, we have developed the static and dynamic simulation program of a high speed current collection system. The catenary wire is modeled to discrete masses connected by massless strings and the pantograph is replaced with 3 d.o.f equivalent models that are composed of masses, springs and dampers. We derived partial differential equations of motion from the equivalent model and developed the simulation program. Then, we calculated the static equilibrium state of the overhead catenary and the dynamic behaviors of the high speed current collection system. The analysis results were compared with the results of GASENDO software developed at RTRI in Japan.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.478-479
• /
• 2007

With increasing interest in the reduction of cost for operation and maintenance of overhead catenary system, various methods of condition monitoring have been developed. In this paper, we proposed network-based telemetry system for condition monitoring in railway and acquired data from any kind of sensor in catenary line and structure at high voltage. This development gives the solution for online condition monitoring in railway. To check the validity of our approach in terms of application, we realized network-based telemetry System.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1328-1333
• /
• 2004

This paper presents a suggestion for improvement of tension balancer in trolly wire system. In the overhead trolly wire systems, one of the most things is tension balancer. Because it can be automatically adjusted tension for expansion and contraction of overhead catenary system. In this paper, we introduce and suggest spring tension balancer(STB).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1347-1352
• /
• 2004

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1020-1026
• /
• 2011

전차선은 철도 전기차량에 전기를 안정적으로 공급하기 위한 시설물로서, 차량이나 외부요인에 의한 전차선의 변형 및 파손을 검지하여 전기철도 시설물 규정에 따라 최적의 상태로 유지해야 할 필요성이 있다. 본 논문에서는 전차선 마킹을 위한 라인레이저와 고속카메라 간에 기하학적 구성을 이용하여 3차선 거리측정방식으로 전차선 높이와 편위를 측정하기 위한 시스템 개발에 관하여 기술하였다. 전차선 거리 측정방법은 이미지 상에 마킹된 전차선 프로파일의 픽셀위치를 삼각함수 기법을 적용하여 카메라와의 전차선간에 각도를 계산하였으며, 카메라는 랜즈 왜곡 및 심도, 원금감 등에 따라 측정대상에 대한 픽셀 해상도가 다르므로 전차선 위치변화에 따른 픽셀당 각도 분해능을 적용하였다. 또한 전차선은 조가선과 급전선등과 같은 다른 전기배선보다 가장 아래에 설비되어 있는 특징을 이용하여 FPGA 상에서 전차선에 마킹된 레이저 프로파일 데이터를 고속으로 추출하여 처리하였다. 개발시스템은 전차선 시설물 평가기준에 따라 전차선 높이, 편위 측정데이터를 실시간 분석하여 이상구간에 대한 실시간 자동화 진단기능을 수행토록 하였다.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.1-5
• /
• 2019

The overhead contact line (OCL) is a key piece of equipment for transmitting electrical energy to the pantograph of rail cars. Recently, a 400 km/h OCL was applied to the Honam high-speed line, and its performance was examined by running HEMU-430X. For the study, we analyzed the current of catenary wire concurrently while running HEMU-430X in the Honam high-speed line. Specifically, this study recorded the currents for each speed during operation of the railway vehicle. The analysis of the frequency of line current showed generation of third-harmonics, 15th-harmonics, 17th-harmonics, and 19th-harmonics. The current of catenary wire is a basic technology assessment used to determine the electrical safety of electric railway systems, and it can be used as a technology for analyzing circulating currents generated in the current configuration, as well as for analyzing electric fatigue of the OCL components.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1084-1088
• /
• 2009

The measurement of dynamic stagger in electric railways is one of the key test parameters to increase speed and maintain safety in electric railways. This paper is introduces a non-contact optical-based measuring instrument of a catenary system in electric railways. The instrument is implemented by utilizing a CCD (Charge Coupled Device) camera installed on the roof of a vehicle for vision acquisition and image processing techniques including the Canny edge detector and the Hough transform to detect contact wires and calculate dynamic stagger. To check the validity of our approach for the intended application, we measured stagger of a overhead wire of a Korea Tilting Train (TTX). The non-contact optical-based measurement system proposed in this paper performs real-time stagger measurement of an activated high-voltage contact wire. By results of this paper, the instrument should be applied to assess performance and reliability of newly developed electric railway vehicles.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1438-1445
• /
• 1992

본 연구에서는 그린(green)의 함수를 사용한 가선-판토그래프 계 운동 해석 방법을 개발하였다. 이 방법은 집중질량 방법이나 모우드 해석법에 비하여 더욱 해 석적이며, 모우드 해석법과는 달리 고유 진동수나 진동형의 계산이 필요하지 않다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.856-861
• /
• 2005

This paper presents an introduction and economical efficiency analysis of spring tension balancer in trolly wire system. In the overhead trolly wire systems, one of the most things is tension balancer. Because it can be automatically adjusted tension for expansion and contraction of overhead catenary system. In this paper, we introduced spring tension balancer and analyzed economical efficiency of it.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.507-512
• /
• 2003

Even if tracks cross each other, a train has to maintain a good current collection. Where catenary cross each other, it is called a crossover. Based on the cause analysis for a breakdown accident of pantograph occurred in the crossover on Ansan-line, a theoretical background and recommendation for the installation rule of a crossover are presented in the paper.