• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.385-388
• /
• 2002

We measured and evaluated digital, pre-sampling and overall imaging properties (characteristic curves, Modulation Transfer Function (MTF), Wiener spectra (WS), Noise Equivalent Quanta (NEQ) and Detective Quantum Efficiency (DQE)) for the direct type and indirect type of Flat-Panel Detector (FPD). First, the digital and overall characteristic curves of the both types of FPD had more wide dynamic range than that of the S/F system. Second, the pre-sampling and overall MTF of the direct-type FPD were superior to those of the indirect-type FPD. Third, for identical exposures, the digital and overall WS of the direct-type FPD were similar or worse than those of the indirect-type FPD, and for larger exposure, the digital WS of the both types of FPD were smaller, but overall WS of the both types of FPD were larger. Fourth, the digital and overall NEQ and DQE of the direct-type FPD were worse than both NEQ and DQE of the indirect-type FPD at lower spatial frequencies, but were better at higher spatial frequencies.

• Proceedings of the KSPS conference
• /
• 2002.11a
• /
• pp.77-80
• /
• 2002

This study proposes phonation type index k as a descriptor of the overall spectral tilt, which is free from the effects of fundamental frequency and vowel quality. The newly proposed phonation type index k presents a simple and single measure of the overall spectral tilt. Phonation type index k can be applied to speech technology. It can also be used in diagnosing patients voice qualities in speech pathology. The distribution of phonation type index k, which is speaker-dependent, may be useful in forensic phonetics and voice recognition as an indicator of speaker identity.

• Journal of the Korean Dietetic Association
• /
• v.13 no.2
• /
• pp.138-156
• /
• 2007

The purposes of this study were to a) measure the service quality attributes of foodservice type such as school foodservice, hospital foodservice and business & industry(B&I) foodservice, managed by contract management company(CMC), b) compare with service quality attributes by CMC scale, c) analyze overall customer satisfaction(CS) by the foodservice type and the CMC scale, and d) identify the effect of service quality attributes on an overall CS by the foodservice type and the CMC scale. The questionnaires were handed out to 6,620 customers of 207 school, 38 hospital, and 86 B&I foodservices in 108 CMCs. The statistical data analysis was completed using SPSS Win(ver 12.0) for descriptive analysis, t-test, reliability analysis, and multiple linear regression analysis. From an analysis on service quality attributes, 'proper arrangement of table and chair at hall distribution(3.53)', 'operation of nutrition education(3.50)' were highly perceived to student, 'correctable serving(4.08)', 'serve at fixed distribution time(4.08)', 'kindness of serving employee(4.04)' were highly perceived to patient, 'employee's kindness(3.84)' were highly perceived to customer of B&I. In comparison of service quality attributes by CMC scale, most scores of large enterprise(LE) were significantly higher than small and medium sized enterprise(SME) in school foodservice, hospital foodservice and B&I foodservice. Overall CS levels were 3.53 out of a maximum 5 on B&I, 3.46 on school, and 3.44 on hospital and were evaluated differently CS score by CMC scale. Finally, regression results for the effects of service quality attributes on overall CS by each of foodservice type were identified significantly different service quality attributes by foodservice type such as school, hospital, B&I(p<.001) and by CMC scale. For considering the goal of enterprise on profit-making through CS and the needs of customer on CS at moment of truth(MOT), the findings should be applied to the CMC and the foodservice industry.

• Journal of the Korean Dietetic Association
• /
• v.24 no.3
• /
• pp.212-230
• /
• 2018

The purpose of this study was to investigate the effects of job stress on job satisfaction according to interpersonal relationship type among school dieticians and nutrition teachers. The online survey was conducted from Oct. 26th to Nov. 7th, 2017 in 2,000 randomly selected dieticians and nutrition teachers in the capital area. A total of 453 collected questionnaires were used for analysis. SPSS v.21.0 Statistical Package Program was used for the statistical process. For the results regarding interpersonal relationship type of dieticians, open-type (73.3%) was the highest, followed by self-assertive-type (23.0%), isolated-type (2.6%), and careful-type (1.1%). Regarding overall job satisfaction, 'human relation' was the highest, followed by 'job itself', 'working environment', and 'personal rating & welfare system', in that order. According to interpersonal relationship type, in the case of 'open-type' or 'careful-type', job satisfaction was relatively high. Regarding overall job stress, 'job demand' was the highest, followed by 'lack of reward', 'organizational system', 'interpersonal conflict', 'occupational climate', 'job insecurity', and 'insufficient job control', in that order. In accordance with interpersonal relationship type, overall job stress index was high in terms of 'self-assertive-type' or 'careful-type'. For the results of analyzing the correlation between job satisfaction and job stress index, all areas showed statistically significant negative correlations. Multiple regression analysis was performed to study the effects of job stress on job satisfaction mediating interpersonal relationship type. Job stress had different effects on job satisfaction in terms of 'open-type' and 'self-assertive type'. In conclusion, different strategies are needed for dieticians with different interpersonal relationship types to improve job satisfaction and to reduce job stress.

• Human Ecology Research
• /
• v.61 no.3
• /
• pp.335-348
• /
• 2023

The purpose of this study was to identify: (a) the latent profiles of the difficulties associated with the schoolto-work transition (decline in confidence, mood swings, family disagreements, the burdens of familial expectations, economic hardship, and a lack of support) made by university students, (b) predictors (gender, age, grade, university location, co-residence with parents on weekdays, monthly household income, and parental educational attainment) of these profiles, and (c) how the profiles were associated with mental wellbeing. The participants of this study were 311 senior or above students (164 males and 147 females) under the age of 29, who were unmarried and preparing for employment. The findings of this study were as follows. First, the latent profile analysis revealed three distinct profiles: the "low overall difficulties" type (25.4%), the "moderate overall difficulties" type (49.9%), and the "high overall difficulties" type (24.7%). Second, the factors that predicted each profile included gender, age, co-residence with parents on weekdays, monthly household income, and parental educational attainment. Third, the "low overall difficulties" type demonstrated the highest level of mental well-being (emotional, social, and psychological well-being). This study was significant for examining the latent profiles of the difficulties associated with the school-to-work transition made by university students preparing for employment, while also exploring their mental well-being. Based on the results of this study, practical implications, limitations, and suggestions for further study were discussed.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.242-250
• /
• 2017

Purpose: This study was conducted to determine the appropriate operating conditions through a factorial experiment for the secondary separating part of the self-propelled pepper harvester. Methods: An experimental setup that simulates the secondary separating part of the self-propelled pepper harvester was organized. Test samples were classified into three types according to the number of peppers on a stem, and 12 sets were prepared for each type. Among the operating conditions of the secondary separating part, the rotational speed of drum B (four levels), radial clearance between drums and cylindrical teeth (three levels), and speed ratio between the three drums (two levels) were set as the test factors, and tests were repeated three times for different levels of each factor. The appropriate operating conditions were determined by analyzing the separation ratio and damage ratio of the peppers collected through the secondary separating part. Results: The test factors changed the overall separation ratio and overall damage ratio in similar trends. In other words, the conditions that caused high overall separation ratios also exhibited high overall damage ratios. Owing to the high overall damage ratio in the condition with the highest overall separation ratio, the operating conditions should be selected considering both ratios. Conclusions: When the condition with more than 60% of overall separation ratio and less than 15% of overall damage ratio was considered as the appropriate operating condition, 70 rpm of the rotational speed of drum B, 5 mm of the radial clearance between drums and cylindrical teeth, and 7:3:5 for the speed ratio of the three drums A, B, and C should be applied for the secondary separating part used in this study. Supplementary studies will be required in the future to find optimal operating conditions through the actual field test under further divided test factors.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.87-103
• /
• 2018

This paper introduces the method to develop two main types of the fuzzy OEE (Overall Equipment Effectiveness) models via triangular membership function for measuring uncertainty. The fuzzy OEE includes model type 1 and model type 2. The model type 1 is used when the theoretical machine speed only reflects the time loss whereas model type 2 is used when the actual machine speed reflects both time and speed loss. Model type 2 has shown to perform a lower availability rate and a higher performance rate compared to model type 1. In addition, the fuzzy UPH (Unit Per Hour) which is derived from using the fuzzy OEE is presented to satisfy demand uncertainty. The fuzzy UPH can easily measure the fuzzy tact time and cycle time by reciprocating itself. Finally, this study demonstrates the fuzzy OEE models using IVIFS (Interval-Valued Intuitionistic Fuzzy Set) based on the characterization via membership function, non-membership function and hesitant function. For the purpose of analyzing the fuzzy system OEE, the OEE for each machine of plant structure is considered triangular interval-valued intuitionistic fuzzy number. Regardless of plant structure, the validity degree of fuzzy membership function of system OEE decreases when the number of machine with worst value of the validity degree increases. Corresponding examples are presented in this paper for practitioner to understand the applicability and practicability of the proposed fuzzy OEE methods.

• Quality Improvement in Health Care
• /
• v.7 no.2
• /
• pp.180-188
• /
• 2000

Objectives : The purpose of this study was to evaluate the reliability of questionnaire according to item arrangement on patient satisfaction questionnaire. Methods : We developed the two types of questionnaire with different item arrangement. In the first type (A), questions were arranged according to medical service dimensions. Questions in the second type (B) were arranged according to medical process. Both questionnaires were composed of six dimensions: physical environments, process, competence, courtesy, information giving, understanding patients. Measurements were performed on a 5-score Likert scale. In an outpatients and inpatient survey, total 777 patients answered the type A (outpatients: 257, inpatients: 128) or Type B (outpatients: 257, inpatients: 135). In order to compare the internal consistency of two types. Cronbach's ${\alpha}$ were calculated. Multiple regression analysis was also performed to know which type of questionnaire explain more of the overall satisfaction. Results : In outpatient survey, type A questionnaire showed higher internal consistency than B except physical environments dimension. Also in inpatient survey, type A had higer internal consistency than B in four dimensions(process, competence, courtesy, understanding patients). In the results of multiple regression analysis, type A questionnaire ($R^2$=0.53) explained more of the variation in overall satisfaction then B questionnaire ($R^2$=0.43) in outpatient survey. In inpatient survey, type B questionnaire ($R^2$=0.40) explained, more of the variation in overall satisfaction than type A questionnaire ($R^2$=0.33).But the difference of R was not significant in inpatient survey. Conclusion : The results of this study support that type A questionnaire has higer reliability in assessment of consumer satisfaction than type B.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.5 no.2
• /
• pp.91-97
• /
• 1976

This study was concerned with performance of 2 types of black painted solar air heaters, one is finned type better, the other is mesh type. The performance test of heaters was made under the different operating conditions during winter season of December in Seoul area. It was analized and discussed by comparing the overall efficiency of 2 solar heaters at the same mass flow rate and ambient temperature. Experimental results show that finned type solar heater is better than mesh type from the point of view of design and heat removal efficiency. Finned-type solar air heater supplies hot air up to 30 degree centigrade above ambient temperature with an overall efficiency of 47 percent whilemesh type was 44 percent.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.55-61
• /
• 2000

In this study, a new design of an one-body type of an unbalanced-fixed- displacement type vane pump combined with an induction type electric motor was suggested. By the application of the new design scheme, it was possible to reduce the number of parts of the pump system and to cut down the volume of power package than that of already-used products. The case in this study enabled efficient heat transfer and electricity insulation of hydraulic fluid. Thus oil moves through the inside of the package for cooling and returns to the reservoir. Because of this design, it was difficult to measure the shaft-input torque. Therefore the package overall efficiency in the paper was evaluated with a ratio of hydraulic power and electric power.