• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.171-175
• /
• 1998

This paper proposes a speed sensorless vector control of induction motor using a minimum-order EKF(extended kalman filter). Minimum-order EKF has the advantage of reducing the computational estimation cost because the stator current is not estimated. EKF does not deteriorate the performance of the overall speed control system, even though the measurements are relatively noisy. The estimated rotor speed is used for vector control and overall speed control. Computer simulations of the speed sensorless vector control are carried out to test the usefulness of the minimum-order EKF algorithm.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2006년도 춘계학술대회
• /
• pp.23-27
• /
• 2006

Internet community's popularity Is growing at an impressive rate. Sooner or later, most people come face to face with the decision of using the mobile internet or mobile community. This study developed and empirically tested a research model, QSL(Quality-Satisfaction-Loyalty) model. The reliability and validity of the measurement test were peformed. Based on a survey at university, this study showed that consultation system is significant on overall customer satisfaction. The possibility of human network is very important in generating overall customer satisfaction. We empirically found that the important role of customer satisfaction as partial moderating factor between service qualities and customer loyalty.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.75-80
• /
• 2009

번인 시험(burn-in test)은 초기 장애가 예측되는 반도체 소자들을 제거하기 위한 시험으로서, 보통 소자에 전압, 온도 및 시간 등의 가혹 조건을 가하며 행해진다. 이런 번인 시험을 위해서는 시험할 소자들을 가진 번인 보드들을 해당 슬롯(slot)들에 삽입할 필요가 있다. 이런 슬롯들의 집합을 존(zone)이라 부른다. 한 존을 구성하는 슬롯들은 동종 반도체 소자들을 가진 번인 보드들만을 가질 수 있다. 따라서 많은 이종 반도체 소자들의 시험을 위해서는 존 수가 많도록 번인 시험 시스템을 구성하는 것이 바람직하다 존을 제어하는 존 컨트롤러는 번인 시험을 수행하고 결과를 수집하는 장치이다. 기존 시스템의 경우, 각 존 컨트롤러는 일정 수의 슬롯들로 구성된 한 존의 시험을 담당한다. 대개, 존 컨트롤러는 번인 시험의 전반을 통제하는 한 워크스테이션 내에 내장되어 있으므로 이들의 추가는 물리적 공간의 제약을 받는다. 본 논문은 이런 문제들의 해결이나 완화를 위한 한 방법으로서 존의 슬롯 수를 동적으로 할당할 수 있는 동적 존 시스템을 제안한다. 이 시스템은 존의 슬롯 수를 가변시켜 빈 슬롯을 최소화함으로써 시스템의 운영 효율을 극대화한다. 또한 기존 시스템의 경우에는 정비를 위해 진행 중인 시험을 모두 중지시켜야 하지만, 동적 존 시스템의 경우에는 시스템에 전력을 공급하는 주 전원이 문제가 되지 않는다면 슬롯별로 개별적인 유지보수가 가능하다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.291-295
• /
• 2007

FTL(Fuel Test Loop) is a facility that confirms performance of nuclear fuel at a similar irradiation condition with that of nuclear power plant. FTL consists of In-Pile Test Section (IPS) and Out-Pile System (OPS). FTL construction work began on August, 2006 and ended on March, 2007. During Construction, ensuring the worker's safety was the top priority and installation of the FTL without hampering the integrity of the HANARO was the next one. Task Force Team was organized to do a construction systematically and the communication between members of the task force team was done through the CoP(community of Practice) notice board provided by the Institute. The installation works were done successfully overcoming the difficulties such as on the limited space, on the radiation hazard inside the reactor pool, and finally on the shortening of the shut down period of the HANARO. Without a sweet of the workers of the participating company of HEC(Hyundae Engineering Co, Ltd), HDEC(HyunDai Engineering & Construction Co. Ltd), equipment manufacturer, and the task force team, it is not possible to install the FTL facility within the planned shutdown period. The Commissioning of the FTL is on due to check the function and the performance of the equipment and the overall system as well. The FTL shall start operation with high burn up test fuels in early 2008 if the commissioning and licensing progress on schedule.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 가을 학술발표회 논문집
• /
• pp.119-122
• /
• 1994

An analytical procedure is described to estimate the mobilized tensile forces along the effective lengths of nails. Based on the horizontal focing displacements of a nailed-soil wall experiencing outward tilt about the toe with granular soil deposit, the variation of nail-soil friction coefficient is modeled. Also, the method of overall stability analysis of a nailed-soil wall is presented using the Morgenstem-Price limit-equilibrium slice method. The results predicted by the developed procedure are compared with test measurements. The comparisons show in general good agreement.

• Architectural research
• /
• 제14권2호
• /
• pp.75-83
• /
• 2012

Buildings that are more than 10 years old generally have considerable repair and replacement costs due to the rapid deterioration of their systems. For public buildings in particular, which have national and social significance, considerable effort is required not only to ensure a long life cycle and safety but also to minimize the overall public expense. Along with increasing repair and replacement requirements, however, there have been problems related to the establishment of an accurate facility management budget. To address these concerns, a repair and replacement cost management system was constructed. This system manages both invested maintenance and forecast costs to establish a reasonable repair and replacement planning process and budget. The effectiveness of the system was verified through a pilot test targeting one of public Corporation (K).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1318-1320
• /
• 2007

Fan noise prediction method is presented for air conditioning and/or cooling system applications where fan acts as an internal equipment having very complicated flow interaction with other various system components. The internal flow paths and distribution in the fan-applied systems such as computer or air conditioner are analyzed by using the FNM(Flow Network Modeling) with the flow resistances for flow elements of the system. Based on the fan operation point predicted from the FNM analysis results, the present fan noise model predicts overall sound power, pressure levels and spectrum. The predictions of the flow distribution, the fan operation and the noise level in electronic system by the present method are well agreed with 3-D CFD and actual noise test results.

• 한국유체기계학회 논문집
• /
• 제10권3호
• /
• pp.33-38
• /
• 2007

Fan selection procedure and fan noise evaluation method are presented for the system electronic cooling by combining FNM(Flow Network Model) and fan noise correlation model. Internal flow paths and distribution in electronic system we analyzed by using the FNM with the flow resistances for flow elements of the system. Based on the fan operation point predicted from the FNM analysis results, the present fan noise model predicts overall sound power, pressure levels and spectrum. The predictions of the flow distribution, the fan operation and the noise level in electronic system by the present method are well agreed with 3-D CFD and actual test results.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.30-39
• /
• 2008

An artificial vision aided NDGPS/INS system has been developed and tested in the dynamic environment of ground and flight vehicles to evaluate the overall system performance. The results show the significant advantages in position accuracy and situation awareness. Accuracy meets the CAT-I precision approach and landing using NDGPS/INS integration. Also we confirm the proposed system is effective enough to improve flight safety by using artificial vision. The system design, software algorithm, and flight test results are presented in details.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(4)
• /
• pp.81-84
• /
• 2002

This paper presents the real-time PCB(Printed circuit board) inspection system that can detect thin open/short error using the line scan camera. After a overall introduction of our system, the outline of our inspection methods are described. The goal of our inspection system is the real time and detailed inspection using the line scan camera. To perform inspection processing in real-time, we utilize double buffering structure. In order to solve the problem of unexpectable pixels of PCB, we propose melting process which eliminates unexpectable pixels of PCB. The design and development of our prototype of PCB ins- pection system is discussed and test results are presented to show the effectiveness of the developed inspection algorithm.