• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.4
• /
• pp.304-311
• /
• 2012

One of the main features of Drillship or FPSO is a moonpool structure. The moonpool structures have various accuracy tolerances according to their functions and targets. This study is mainly interested in roundness of a circular moonpool structure in FPSO. Because this structure needs abrasion-resistance at which bearing of machine touches on inner wall of moonpool, we should do over-lay welding widely and deeply by using Inconel weld material. But a general over-lay can cause a severe distortion at ship block structure. If we can analyze the roundness by thermal distortion under Inconel over-lay, we can establish a special erection policy by the results. In this study, we designed stress-strain curve for strain-boundary condition analysis by an elasto-plastic material property. The results made us to decide an appropriate ship-block size and policy of crane manipulation will follow for its capacity. If a structure that needs over-lay is not large, solid elements also are not a bad choice for FEM modeling. Therefore we also developed a standard of using strain-boundary method that shell elements are used as over-lay on solid element modeling.

• International Journal of Ocean System Engineering
• /
• v.3 no.2
• /
• pp.95-101
• /
• 2013

This study is mainly interested in roundness of a circular moonpool structure in FPSO. Because this structure needs abrasion-resistance on inner wall, we should do buttering widely and deeply by using Inconel. But a general buttering can cause a severe distortion at structures. If someone can analyze the roundness by thermal distortion under Inconel over-lay, an erection policy can be established. In this study, shrinkage methodology by designed stress-strain curve was used and the result allowed deciding an appropriate block size.

• Research in Community and Public Health Nursing
• /
• v.29 no.3
• /
• pp.335-348
• /
• 2018

Purpose: This study has been conducted to develop and examine a health promotion empowerment program using a lay health leader for frail elderly. Methods: The research was organized in a nonequivalent control group pre-post test design. Data collection was performed from August 18 to October 8, 2015. The subjects included 76 frail elders aged over 65 registered in home visiting services (Experimental group=39, Control group=37). A health promotion empowerment program using a resident volunteer as a lay health leader was run for 8 weeks. Health factors (health promotion behavior, perceived health status and frailty) and empowerment factors (empowerment, social participation) were assessed. The data were analyzed by using the SPSS/WIN 18.0 program. Results: After the program, health promotion behavior, perceived health status and social participation increased in the experimental group more significantly than in the control group, but frailty decreased in the experimental group greater than in the control group. Conclusion: The health promotion empowerment program using a resident volunteer as a lay health leader was effective. Therefore, the health promotion empowerment program needs to be expanded to other frail elders. Also, a health leader should be recommended as a public health resource and systematically managed.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.277-299
• /
• 2008

High quality and expedient processing repair methods are necessary to enhance the service life of bridge structures. Deterioration of concrete can occur as a result of structural cracks, corrosion of reinforcement, and freeze.thaw cycles. Cost effective methods with potential for field implementation are necessary to address the issue of the vulnerability of bridge structures and how to repair them. Most infrastructure related applications of fiber-reinforced plastics (FRPs) use traditional hand lay-up technology. The hand lay-up is tedious, labor-intensive and relies upon personnel skill level. An alternative to traditional hand lay-up of FRP for infrastructure applications is Vacuum Assisted Resin Transfer Molding (VARTM). VARTM uses single sided molding technology to infuse resin over fabrics wrapping large structures, such as bridge girders and columns. There is no work currently available in understanding the interface developed, when VARTM processing is adopted to wrap fibers such as carbon and/or glass over concrete structures. This paper investigates the interface formed by carbon fiber processed on to a concrete surface using the VARTM technique. Various surface treatments, including sandblasting, were performed to study the pull-off tensile test to find a potential prepared surface. A single-lap shear test was used to study the bond strength of CFRP fabric/epoxy composite adhered to concrete. Carbon fiber wraps incorporating Sikadur HEX 103C and low viscosity epoxy resin Sikadur 300 were considered in VARTM processing of concrete specimens.

• Journal of Science and Technology Studies
• /
• v.16 no.2
• /
• pp.99-147
• /
• 2016

This paper critically reviews the previous discussion over public engagement with science and technology by Science and Technology Studies literatures with a focus on justification and acceptance. Recent studies pointed out that the "participatory turn" after the late 1990s was followed by confusion and disagreement over the meaning and agency of public engagement. Their discussion over the reproduction of the ever-present boundary between science and society along with so-called late modernity and post-normal science and sometimes through the very processes of public engagement draws fresh attention to the old problem: how can lay participation in decision-making be justified, even if we agree that privileging the position of experts in governance of science and technology is no longer justified? So far STS have focused on two conditions for participatory turn-1) uncertainties inherent in experts' ways of knowing and 2) practicability of lay knowledge. This paper first explicated why such discussion has not been logically sufficient nor successful in promoting a wide and well-thought-out acceptance of public engagement. Then the paper made a preliminary attempt to explain what new types of expertise can support the construction and sustainment of participatory governance in science and technology by focusing on one case of lay participation. The particular case discussed by the paper revolves around the actions of a civil organization and an activist who led legal and regulatory changes in wind power development in Jeju Special Self-governing Province. The paper analyzed the types of expertise constructed to be effective and legitimate during the constitution of participatory energy governance and the local society's support for it. The arguments of this paper can be summarized as follows. First, an appropriate basis of the normative claim that science and technology governance should make participatory turn cannot be drawn from the essential characteristics of lay publics-as little as of experts. Second, the type of 'expertise' which can justify participatory governance can only be constructed a posteriori as a result of the practices to re-construct the boundaries between factual statements and value judgment. Third, an intermediary expertise, which this paper defines as a type of expertise in forming human-nonhuman associations and their new pathways for circulations, made significant contribution in laying out the legal and regulatory foundation for revenue sharing in Jeju wind power development. Fourth, experts' conventional ways of knowing need to be supplemented, not supplanted, by lay expertise. Ultimately, the paper calls for the necessity to extend STS discussion over governance toward following the actors. What needs more thorough analysis is such actors' narratives and practices to re-construct the boundaries between the past and present, facts and values, science and society. STS needs a renewed focus on the actual sites of conflicts and decision-making in discussing participatory governance.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1853-1859
• /
• 2008

IGBT modules are designed for low loss, rugged for all environments and user friendly. Low on state saturation voltage with high switching speed is the primary concerns. In this paper selection of IGBT, module ratings and characteristics are discussed. The IGBT design topic of protection against over voltage and over current are covered. Emphasis on turn off switching, short circuit switching and necessary precautions are dealt. Selection of IGBT device, gate drive power, and its lay out considerations are covered in detail.

• Korean Journal of Poultry Science
• /
• v.2 no.1
• /
• pp.4-6
• /
• 1975

Field trials and research works have shown that the sexually retarded pullets are better equipped to lay larger eggs at the commencement of lay than the pullets grown under the natural conditions with no control over the rate of maturity. The method of delaying the sexual maturity by restricting the nutrient intake is receiving a considerable attention from the research workers, since the nutrient restriction can be a method of reducing the rearing cost. Many experiments were carried out to study the effect of different methods of restricting the nutrient intake of the chicken. But the comparisons between these experiments are difficult because of the differences in the environment, management, type of breed and feed, and in the length of the time during which the feed intake was restricted. In addition the comparisons were not made on an economic basis in these experiments. This experiment was designed to provide information on the reproductive responses to three different methods of restricting the nutrient intake in a egg type stock and to establish which methods are economically profitable. (omitted)

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.245-250
• /
• 2011

Purpose: Composite tissue allotransplantation has emerged as a new therapeutic modality to reconstruct major tissue defects of the head, neck and extremities. A questionnaire-based instrument, the Louisville Instrument for Transplantation (LIFT), has been developed to objectively assess the risk-versus-benefit ratio for composite tissue allotransplantation procedures. The objective of this study is to assess if the LIFT is a useful, reliable and valid tool to apply to the Korean population. Methods: Seventy-three medical students and 60 lay public completed the LIFT questionnaire (translated to Korean) over the period from February 2010 to April 2010. Internal consistency was assessed using Cronbach's alpha. Test-retest reliability was analyzed using Pearson's correlation coefficient. Construct validity was assessed by comparing Pearson's correlation coefficients between perceived improvements in quality of life and responses to risk tolerance questions concerning organ transplants. Results: Measurements of the test-retest reliability showed that Pearson's correlation coefficients ranged from 0.241 to 0.902, and Cronbach's alphas ranged from 0.52 to 0.80 for medical students and from 0.63 to 0.83 for the lay public. Pearson's correlation coefficients showed significant correlations between perceived improvements in quality of life and responses to risk tolerance questions concerning organ transplants. Hand transplant showed a significant correlation in medical students. Foot, hand, two hands, larynx, partial face transplants showed significant correlations for the lay public. Conclusion: The applicability of the LIFT to the Korean population was found to be reliable and valid. The LIFT may serve as a useful tool for clinical application in the Korean population.

• Journal of Christian Education in Korea
• /
• v.72
• /
• pp.225-244
• /
• 2022

The purpose of this study is to study the experiences of online service during the COVID-19 and to find out Korean Christians' perception. To this end, this study examines the differences in online service content, interactions with pastors and lay people through online service, online service environment, and online service satisfaction. A survey was conducted for 176 Korean Christians over the age of 18 living in the metropolitan area. As a result, according to the size of the church attending, the period of faith, and the position, there was a difference between groups in the online service contents, interactions with pastors and lay people through online service, online service environment, and online service satisfaction. The factors influencing the satisfaction of online service were the interaction with the lay people, the online service environment, and the online service content in that order. Based on the results of this study, a discussion on the improvement of online service satisfaction and a suggestion for further research are presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.6-12
• /
• 2017

In a large 3D printer when the cooler, which cools the filament, acts in one direction, the area directly exposed to the cooling is cooled to the proper temperature. However, the cooling effect on the opposite area is relatively less. It was found in experiments that filaments with a thickness of over 2 mm exhibit the cooling problem in one directional cooling. Consequently, cooling was performed to prevent the flow-down and to produce firm support leading to an improvement in product quality in extrusion. Further, the lay-up of a 3D printer with five guides combined with a duct was achieved. Analysis showed that the improvement in the cooling effect enables stable extrusion and lay-up and thus, reduces fabrication time.