• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.9
• /
• pp.437-443
• /
• 2005

This paper deals with an experimental study for Klippon reiay in Cheju-Heanam HVDC system Klippon relay was troubled many times for years, and Klippon relay's fault caused the HVDC system trip. So for several years, these reasons of Klippon relay fault were investigated. The malfunction of Klippon relay in Cheju-Haenam HVDC system has been caused by the incoming of random surge(current source and voltage source). This paper has stu야ed the theoretic리 analysis and experimental study of Klippon relay, and the solutions against the problems were suggested according to their causes. Among the problems, grounding problem was removed by one-point earth connection and by modification of grounding circuit. The effects of inrush current was removed by inserting the blocking diodes by series in Klippon relay circuits. Finally, The over-voltage induced on Klippon relay, by a relay excitation coil, was removed by inserting a free-wheeling diode in Parallel with the excitation coil.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.59-62
• /
• 1986

Folded Box coherent anti-Stokes Raman spectroscopy (FBCARS) spectra of the fundamental symmetric stretch(213 $cm^{-1}$) and the first overtone(421 $cm^{-1}$) of $I_2$ have been recorded over the pump wavelength range from 495 nm to 580 nm. The lineshapes were fitted using the least squares method and the A and C term of CARS were calculated. From the fitting of A and C terms, the real(R) and imaginary(I) term intensity of CARS were calculated using harmonic oscillator program. The calculated CARS excitation profile of $I_2$ with R and I term data was about 270 $cm^{-1}$ red shifted from the absorption spectrum.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.34-41
• /
• 2001

In an IMBE (Improved Multi-band Excitation) speech coder, initial pitch estimation occupies most of the total computing time for the coder due to complex cost function and exhaustive search over candidate pitches. Future frames in initial pitch estimation cause inevitable time delay. Therefore, it is difficult to implement a real-time coder. Furthermore, unvoiced frames use the unnecessary pitch estimation as in the voiced frames. In this paper, each frame is determined voiced or unvoiced by Dyadic Wavelet Transform (DyWT) and, then, initial pitch estimation is performed only for voiced frame. Therefore different pitch estimation algorithms are employed between voiced and unvoiced frames incurring reduced time delay at transmitter and receiver. Simulation result show that the relative complexity of initial pitch estimation is reduced by 23％, and the processing time decreases down to 1/10 ∼ 1/1l of the IMBE coder while speech quality is almost maintained.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.622-629
• /
• 2004

In practical control systems, the capacity of actuators is limited and this degrades the system performances and it is often a source of instability. To use full capacity of actuators, we adopt the gain scheduled control permitting the over saturation in controls. The basic idea of gain scheduled control is to use a higher gain control when the state variables are smaller and a lower gain control when the state variables are larger. First, we derive a constant H control and a reachable set while satisfying the degree of over saturation. Next, we divide this set into nested subsets and find $H_{\infty}$ controls at rack subsets while satisfying the degree of over saturation. Finally, the control gain is applied according to the status of states. Note that all procedures are done by solving linear matrix inequalities(LMI). Finally, we show the validity and applicability of our proposed control using the simulations of a six-story building subjected to the earthquake excitation.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.72-78
• /
• 2003

To observe the effect of excitation coil pitch on the micro fluxgate magnetic sensor, two sensors are fabricated using multi layer board process and the pitch distance of excitation coil are $260\;{\mu}m$ and $520\;{\mu}m$, respectively. The fluxgate sensor consists of five PCB stack layers including one layer of magnetic core and four layers of excitation and pick-up coils. The center layer as magnetic core is made of a Co-based amorphous magnetic ribbon with extremely high DC permeability of ${\sim}100,000$ and has a rectangular-ring shape to minimize the magnetic flux leakage. Four outer layers as excitation and pick-up coils have a planar solenoid structure and are made of copper foil. In case of the fluxgate sensor having the excitation coil pitch of $260\;{\mu}m$, excellent linear response over the range of $-100\;{\mu}T$ to $+100\;{\mu}T$ is obtained with sensitivity of 780 V/T at excitation sine wave of $3V_{p_p}$ and 360 kHz. The chip size of the fabricated sensing element is $7.3\;{\times}\;5.7\;mm^2$. The very low power consumption of ${\sim}8\;mW$ is measured. This magnetic sensor is very useful for various applications such as: portable navigation systems, telematics, VR game and so on.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.111-120
• /
• 1985

The oxidation reaction of CO on the catalysts 4 mol%, 8 mol%, and 12 mol% Cd-doped ${\alpha}-Fe_2O_3$ is individually investigated. Regardless of Cd doping level, over-all reaction order for the oxidation of CO is 1.5; the first order with respect to CO and the one-half order with respect to $O_2$. Over the temperature range of 350∼$460^{\circ}C$, the activation energy for CO oxidation is 10.10∼11.30Kcal/mol. From the agreement between the kinetic data and conductivity measurements, the reaction mechanism is suggested. Especially from the effect of Cd doping, the fact that catalytic activity of ${\alpha}-Fe_2O_3$ is due to the excitation of electrons which are traped on oxygen vacancy is found, and the adsorption sites for reactant molecules are found.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.100.2-100.2
• /
• 2012

We have investigated excitation processes of the 3-micron bands of $CH_4$, $C_2H_2$, and $C_2H_6$ over the auroral regions of Jupiter including particle bombardments, Joule heating, scattering of solar radiation, and possible chemiluminescence. We also considered possible LTE or Non-LTE conditions of these processes. We constructed particle precipitation models including $H_2$, He, H, and the hydrocarbon molecules for the atmosphere of the auroral regions. We present preliminary results from these models, and comparisons of the model results with spectroscopic observations in the 3 micron wavelength range of Jupiter.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.134-135
• /
• 2003

Abstract in case of the small scale power system separated from large scale power system N-2 contingency, the Over excitation, Under Frequency and Power swing Tripping Relay operate depending on unbalance Of Generation and Load. and then we studied and measured the angle and frequency deviation between generators. moreover, we compared real fault example with simulation results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.345-351
• /
• 1997

The motion of an aircraft landing gear over rough runway at variable speed is nonstationary. hi this paper, a method for the computation of nonstationary response variance is presented which uses a state space form for the combination of landing gear and runway excitation. The dynamic characteristics of the landing gear under nonstationazy random excitations has also been analyzed using the proposed method. The formulation is for linear systems of arbitrary order and allows any deterministic velocity history.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.367-374
• /
• 1999

this paper focuses on the dynamic characteristics of full-scale viscoelastic dampers through the experimental study. Viscoelastic dampers which dissipate the response energy of a building under earthquake excitation make a role of increasing damping capacity of the building. Therefore it is important to recognize the damping behavior of viscoelastic dampers. Full-scale viscoelastic dampers are made of three types of rubbers for experimental test. The hysteretic behavior is obtained through the load-deformation experiment over the various loading frequencies and damper strains The experimental results show the good performance of viscoelastic dampers under earthquake excitations,