• Journal of the Korean Geosynthetics Society
• /
• v.11 no.1
• /
• pp.23-33
• /
• 2012

The stability of urban railway foundation can be a problem due to the excessive settlement. The settlement at the base of railway is monitored by the installed settlement gauges. The piezometer and pore water pressure measurement device are installed to measure the variation of pore water pressure and ground water table during the continuous pullout of sheet piles which were used for the braced cut. The settlement of railway is predicted with using the computer program CAIN RDA. The input data for the numerical analysis are obtained from the field soil exploration data and soil properties. The surcharged load from landscaping over the ground surface and the weight of train are taken into account for the estimation of settlement. As a result of numerical analysis, the range of settlement for six different Sites is from 5.94 cm to 12.77 cm. Thus, the settlement level at Site 2 is occurred 12.77 cm which is higher than the allowable settlement of 10 cm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.101-108
• /
• 1992

A careful re-examination has been conducted on the applicability of the concept of equilibrium riverbed slope to river engineering practice and on the validity of Aki's and Mononobe's formulas that are widely used in Korea for determination of equilibrium riverbed slope. A stream in equilibrium is one in which, over a period of years, slope is naturally adjusted to provide, with available water discharge and with prevailing channel characteristics, just the velocity required for transportation of the sediment load supplied from the upstream. The equilibrium riverbed slope is the bed slope of such river. The present river engineering practice to analyze the riverbed characteristics by applying so called 'the equilibrium riverbed slope formula' to such rivers, therefore, should be avoided. Also, the validities of Aki's and Mononobe's formulas, that are presently used for determination of stable channel slope, are very dubious and should not be used in river engineering practice.

• Composites Research
• /
• v.26 no.1
• /
• pp.66-71
• /
• 2013

As a fundamental structural element of construction, a pile is constructed to transfer loads from superstructure to foundation. In general, since the pile foundation is constructed in the ground or ground under water, it is difficult to protect from the damages due to moisture and/or salt which create corrosive environment and it is even more difficult to estimate its durability. In this study, in order to enhance the durability and constructibility of the pile foundation, FRP-concrete hybrid composite pile (HCFFT) is suggested. Moreover, equation for the prediction of load carrying capacity of HCFFT circular members under compression is suggested and discussed based on the results of analytical and experimental investigations. In addition, we also conducted the finite element simulation for the structural behavior of new HCFFT composite pile and the result is compared with those of experimental and analytical studies. In addition, the axial loading capacity of new HCFFT composite pile is compared with those of existing PHC pile and hollow circular steel pipe pile, and it was found that the new HCFFT composite pile has advantages over conventional PHC and steel pipe piles.

• Composites Research
• /
• v.31 no.4
• /
• pp.151-155
• /
• 2018

Mechanical joint and adhesive joint are two typical joining methods for structures. The adhesive joints distribute the load over a larger area than mechanical joints and have excellent fatigue properties. However, the strength of adhesive joint greatly depends on the environmental conditions and the skill of the operator. Therefore, there is a need for techniques to evaluate the quality of the adhesive joints. The electric resistance method is a very promising technique for detecting defects by measuring the electrical resistance of an adhesive joint in which CNTs are dispersed in an adhesive. In this study, Aluminium-Aluminium adhesive single lap joint specimens were fabricated by using the adhesive dispersing CNTs using a sonicator and a 3-roll mill, and the static strengths and defect detection capabilities of the joints using the electrical resistance method were evaluated according to the CNTs content.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.771-791
• /
• 2018

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3173-3177
• /
• 2016

Background: The Ministry of Public Health (MOPH) in Lebanon provides cancer drugs free of charge for uninsured patients who account for more than half the total case-load. Other categories of cancer care are subsidized under more stringent eligibility criteria. MOPH's large database offers an excellent opportunity to analyze the cost of cancer treatment in Lebanon. Materials and Methods: Using utilization and spending data accumulated at MOPH during 2008-2013, the cost to the public budget of cancer drugs was assessed per case and per drug type. Results: The average annual cost of cancer drugs was 6,475$ per patient. Total cancer drug costs were highest for breast cancer, followed by chronic myeloid leukemia (CML), colorectal cancer, lung cancer, and Non-Hodgkin's lymphoma (NHL), which together represented 74% of total MOPH cancer drug expenditure. The annual average cancer drug cost per case was highest for CML ($31,037), followed by NHL ($11,566). Trastuzumab represented 26% and Imatinib 15% of total MOPH cancer drug expenditure over six years. Conclusions: Sustained increase in cancer drug cost threatens the sustainability of MOPH coverage, so crucial for socially vulnerable citizens. To enhance the bargaining position with pharmaceutical firms for drug cost containment in a small market like Lebanon, drug price comparisons with neighboring countries which have already obtained lower prices may succeed in lowering drug costs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.669-674
• /
• 2017

Due to the depletion of fossil fuels and the increase in environmental pollution, electric vehicles are attracting attention as next-generation transportation and are becoming popular all over the world. As the interest in electric vehicles and the penetration rate increase, studies on the charging infrastructure with vehicle-to-grid (V2G) technology and information technology are actively under way. In particular, communication with the grid network is the most important factor for stable charging and load management of electric vehicles. However, with the existing centralized infrastructure, there are problems when control-message requests increase and the charging infrastructure cannot efficiently operate due to slow response speed. In this paper, we propose a new charging infrastructure using mobile edge computing (MEC) that mitigates congestion and provides low latency by applying distributed cloud computing technology to wireless base stations. Through a performance evaluation, we confirm that the proposed charging infrastructure (with low latency) can cope with peak conditions more efficiently than the existing charging infrastructure.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.657-666
• /
• 2013

Today, many aspects of our lives are characterized by the rapid influx of large amounts of data from various application domains. The applications that produce this massive of data span a large spectrum, from social media to business intelligence or biology. This massive influx of data necessitates large scale parallelism for efficiently supporting a large class of analysis tasks. Recently, there have been extensive studies in using MapReduce framework to support large parallelism. While this technique has produced impressive results in diverse applications, the same can not be said for multimedia applications where most of users are interested in a small number of results having high or low score. Thus, in this paper, we develop the data partitioning algorithm which is able to efficiently process large data set having different data utility. The experiment results show that the proposed technique provides significant execution time gains over the existing solution.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1193-1200
• /
• 2001

There are many regulation test methods to be related with engine emissions such as CVS-75, D-13, ECE-15 modes and so on. Most of these modes are consisted of lots of transient conditions that have rapid acceleration, deceleration and cranking modes. In this experimental research, the engine characteristics of cranking, accelerating and power output in a S.I. engine were studied to compare with neat gasoline and alternative fuels of M30 (methanol 30%, aromatic series 32%, non-aromatic 38%) and M50 (methanol 50%, aromatic 30%, non-aromatic 20%) for performance and exhaust emissions. The results show that reformulated methanol fuels are better emissions reduction of 15.7% over than that of neat gasoline fuel especially in HC and CO emissions at cranking mode. And the accelerating performances coincide with the results of distillation curve. CO concentration for M50 fuel is varied in a just little for the condition of slow acceleration. At wide-open throttle condition, brake specific energy consumption of reformulated fuels is increased and thermal efficiency is some what lower than that of gasoline fuel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.639-647
• /
• 2014

Due to global warming and depletion of fossil fuels, technologies reducing $CO_2$ emission and increasing fuel efficiency simultaneously are required. An exhaust gas heat recovery system is a technology to satisfy both issues. This study analyses three types of heat exchanger installed on an exhaust pipe. In case of plate type heat exchanger, back pressure rapidly increased and maximum cylinder pressure reduced in high speed and maximum load, and back pressure increased over twice and specific fuel consumption also increased up to 2% which were the highest increasing rate. In case of fin tube type, the amounts of exhaust emissions and specific fuel consumption rate were less than the other two types. The effect of shell and tube was in the middle. Making a decision by only the effect on engine performance, a fin tube type is the best for exhaust heat recovery systems.