• International Journal of Knowledge Content Development & Technology
• /
• v.13 no.3
• /
• pp.7-30
• /
• 2023

Nigeria is a country with multiple ethnic groups; as a result, English language is used as a lingua franca to enhance information flow. Despite this, the Indigenous languages of communities are mostly used for interactions, even in university environments thereby affecting smooth interaction for those who do not understand them. This study therefore investigated the impact of being a linguistic outsider on information access, learning and social wellbeing of students. Descriptive research of a case study was used for this study. The population for this study consisted of non-Yoruba indigenous students. Judgmental sampling technique was used to select 50 non-indigenous students; structured interview was used. Results showed that Yoruba indigenous language was used lightly in the classroom and heavily outside the classroom, with mixtures of pidgin and English languages. It was found that being a linguistic outsider had a negative influence on information access. However it was not a total dependent factor to social wellbeing of students who desire for their various languages to be predominantly used and for them to enjoy equal benefits with Yoruba indigenes. This study also revealed that being a linguistic outsider does not have negative influence on academic learning. It was recommended that the stakeholders in university management promote the complete use of English language in the classroom while students should be encouraged to interpret Yoruba language when spoken in the midst of non-indigenes.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.391-398
• /
• 2016

Acoustic emission (AE) is one of the most powerful techniques for detecting damages and identify damage location during operations. However, in case of the source location technique, there is some limitation in conventional AE technology, because it strongly depends on wave speed in the corresponding structures having heterogeneous composite materials. A compressed natural gas(CNG) pressure vessel is usually made of carbon fiber composite outside of vessel for the purpose of strengthening. In this type of composite material, locating impact damage sources exactly using conventional time arrival method is difficult. To overcome this limitation, this study applied the previously developed Contour D/B map technique to four types of CNG storage tanks to identify the source location of damages caused by external shock. The results of the identification of the source location for different types were compared.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.4
• /
• pp.279-284
• /
• 2007

There ate various studies being conducted regarding efficient routing schemes to reduce energy consumption in the wireless sensor network, for which energy transformation is difficult. In terms of routing, many believe that the dynamic clustering technique is most efficient. The dynamic clustering technique consists of cluster construction and data transmission. Energy consumption for data transmission is proportional to $d^2$ and $d^4$ around the crossover area. This paper proposed algorithms for reducing energy consumption by improving efficiency of the cluster construction process that in the dynamic cluster mechanism and minimizing long-distance data transmission outside the crossover area. The proposed algorithms reduced energy consumption by implementing bridge clusters in the crossover area and decreasing the data transmission distance. The benefits of the proposed algorithms were confirmed through simulation experiments.

• Progress in Medical Physics
• /
• v.30 no.3
• /
• pp.65-73
• /
• 2019

Purpose: We evaluated the motion-induced dosimetric effects on the field-in-field (FIF) technique for whole-breast irradiation (WBI) using actual patient organ motion data obtained from cine electronic portal imaging device (cine EPID) images during treatment. Materials and Methods: Ten breast cancer patients who received WBI after breast-conserving surgery were selected. The static FIF (SFIF) plan involved the application of two parallel opposing tangential and boost FIFs. To obtain the amplitude of the internal organ motion during treatment, cine EPID images were acquired five times for each patient. The outside contour of the breast (OCB) and chest wall (CW) contour were tracked using in-house motion analysis software. Intrafractional organ motion was analyzed. The dynamic FIF (DFIF) reflecting intrafractional organ motion incorporated into the SFIF plan was calculated and compared with the SFIF in terms of the dose homogeneity index (DHI_90/10) for the target and V₂₀ for the ipsilateral lung. Results: The average motion amplitudes along the X and Y directions were 1.84±1.09 mm and 0.69±0.50 mm for OCB and 1.88±1.07 mm and 1.66±1.49 mm for CW, respectively. The maximum motion amplitudes along the X and Y directions were 5.53 and 2.08 mm for OCB and 5.22 and 6.79 mm for CW, respectively. Significant differences in DHI_90/10 values were observed between SFIF and DFIF (0.94 vs 0.95, P<0.05) in statistical analysis. The average V₂₀ for the lung in the DFIF was slightly higher than that of the SFIF in statistical analysis (19.21 vs 19.00, P<0.05). Conclusion: Our findings indicate that the FIF technique can form a safe and effective treatment method for WBI. Regular monitoring using cine EPID images can be effective in reducing motion-induced dosimetric errors.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1739-1742
• /
• 2011

Public transportation network in our country is concentrated and advanced focusing on urban area in order to secure economic feasibility. As a result, as dependence on private vehicles is relatively getting higher in public transportation vulnerable area, traffic problem occurs since the average running speed in urban area is 22.5km/h. This paper has an objective to suggest an improvement plan by selecting public transportation vulnerable area, and defining according to urban structure, formation and function, and understand traffic characteristics and draw problems. As a method selecting public transportation vulnerable area, an area with high division rate of vehicle was selected as a primary proposed site by calculating division rate of means of public transportation according to area. Final proposed site was selected by using GIS Buffering technique aiming at selected proposed site, and selecting non-benefit area 500m outside, which is the road limit distance from each subway and bus station. Lastly, the degree of improvement effect was studied by constructing imaginary public transportation network aiming at final proposed site and comparing to the amount of change in division rate of means of transportation.

• Journal of Arbitration Studies
• /
• v.27 no.4
• /
• pp.35-60
• /
• 2017

Arbitration, a form of alternative dispute resolution (ADR), is a technique for the resolution of disputes outside the courts. Parties often seek to resolve disputes through arbitration because of a number of perceived potential advantages over judicial proceedings: Arbitration is generally faster and more inexpensive (cheaper) than litigation in court. The Republic of Korea enacted the "Arbitration Industry Promotion Act" to develop arbitration. This law provides for the establishment and operation of arbitration institutions, training of arbitration experts, and support of arbitration studies and international exchanges. Effective operation of an arbitration institution has an important influence on the development of arbitration. Neutral and good arbitration experts improve the authority of arbitration. The academic study of arbitration theoretically develops the arbitration procedure. In addition, this paper referred to some additional factors that South Korea should have in order to become an attractive place of arbitration. Neutrality and fairness of the court of arbitration are highly important factors in arbitration. Therefore, the arbitration institution should be operated independently and clearly from the government to ensure neutrality and fairness. The parties of arbitration should also be free and able to defend their interests sufficiently in the arbitration proceedings. Lastly, coordination between this law and other laws is necessary.

• The Korea Journal of Herbology
• /
• v.20 no.4
• /
• pp.77-82
• /
• 2005

Objectives : In order to distinguish Akebiae Caulis and Aristoiochiae Manshuriensis Caulis, their external and internal states were examined by microscope. Methods : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Results : 1. Akebiae Caulis has stone cells and fiber bundles in its pericycle part, which include square crystal of calcium oxalate. Outside of neogenesis has a lot of cells with square crystal of calcium oxalate. 2. Aristoiochiae Manshuriensis Caulis has a little lignified fiber bundles in its pericycle part, and parenchymatous cell has delicate starch grains and druse of calcium oxalate. Conclusions : In conclusion, internal forms of Akebiae Caulis and of Aristoiochiae Manshuriensis Caulis are different in that each includes square crystal of calcium oxalate and druse of calcium oxalate respectively, so that it may be possible to distinguish them with optical microscope.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.492-497
• /
• 2004

Three methods for design sensitivity such as numerical differentiation, analytical method and semi-analytical method have been developed for the last three decades. Although analytical design sensitivity analysis is exact, it is hard to implement for practical design problems. Therefore, numerical method such as finite difference method is widely used to simply obtain the design sensitivity in most cases. The numerical differentiation is sufficiently accurate and reliable for most linear problems. However, it turns out that the numerical differentiation is inefficient and inaccurate because its computational cost depends on the number of design variables and large numerical errors can be included especially in nonlinear design sensitivity analysis. Thus semi-analytical method is more suitable for complicated design problems. Moreover semi-analytical method is easy to be performed in design procedure, which can be coupled with an analysis solver such as commercial finite element package. In this paper, implementation procedure for the semi-analytical design sensitivity analysis outside of the commercial finite element package is studied and computational technique is proposed, which evaluates the pseudo-load for design sensitivity analysis easily by using the design variation of corresponding internal nodal forces. Errors in semi-analytical design sensitivity analysis are examined and numerical examples are illustrated to confirm the reduction of numerical error considerably.

• Journal of Korea Multimedia Society
• /
• v.21 no.8
• /
• pp.864-875
• /
• 2018

In this paper, we propose a measurement method for height of white light scanning interferometer using deep learning. In order to measure the fine surface shape, a three-dimensional surface shape measurement technique is required. A typical example is a white light scanning interferometer. In order to calculate the surface shape from the measurement image of the white light scanning interferometer, the height of each pixel must be calculated. In this paper, we propose a neural network for height calculation and use virtual data generation method to train this neural network. The accuracy was measured by inputting 57 actual data to the neural network which had completed the learning. We propose two new functions for accuracy measurement. We have analyzed the cases where there are many errors among the accuracy calculation values, and it is confirmed that there are many errors when there is no interference fringe or outside the learned range. We confirmed that the proposed neural network works correctly in most cases. We expect better results if we improve the way we generate learning data.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.50-56
• /
• 2008

The tubes in heat exchanger are typically made of copper alloy, stainless steel, carbon steel, titanium alloy material. Type-439 ferritic stainless steel is ferromagnetic material, and furnish higher heat transfer rates than austenitic stainless steels and higher resistance to corrosion-induced flaws. Ferritic stainless steel can be found in low-pressure(LP) feedwater heaters and moisture separator reheaters(MSRs) in turbine system. LP feedwater heaters generally utilize thin wall Type-439 stainless steel tubing, whereas MSRs typically employ a heavier wall tubing with integral fins. Service-induced damage can occur on the O.D(outside diameter) surface of Type-439 ferritic stainless steel tubing which is employed for MSRs tubing, and the most typical damage mechanism is vibration-induced tube-to-TSP(tube support plate) wear and fatigue cracking. The wear has been reported that occurs mainly on the OD surface. Accordingly, in this study, we have evaluated the flaw sizing capability of magnetic saturation eddy current technique using magnetic saturation probe and flawed specimen.