• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.91-91
• /
• 2011

The quality of the surface layer in concrete structures plays an important role in the durability of the concrete. The concrete factory products are made as they improve the appearance of the surface and compressive strength in need. A common criterion to judge the quality of concrete products frequently seen in our daily life appears to be "beauty" in terms of consistent shaping. However, as for most concrete curb in such areas where a large amount of anti-freezing agents(NaCl) and ice and snow melting agents(CaCl2) are spread over roads to ensure road safety during the winter season, since deterioration advances from the surface, scaling is seen on the surface concrete due to deterioration which combined freezing damage and salt damage. Especially, In cold northern districts, the spreading amount of deicing salts increases by regulation of studded tire use, and the scaling of the concrete products, the various parts of concrete structures for roads is increasing in recent years. In this study, L-shape concrete curb were targeted, the permeable form method with the commercial permeable sheet was applied to it and the improvements of the quality were examined. By the permeable form method, surface layers got strengthened, which prevented permeation of the deterioration factor from the outside, and the scaling resistance of the upper surface where the permeable sheet was applied improved exceedingly. It will be expected by applying the permeable form method to various concrete products that frost resistance improves and scaling damage decreases.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.44-50
• /
• 2004

Mechanical parts are often grouped into part families based on the similarity of their shapes, to support efficient manufacturing process planning and design modification. The 2-part sequence papers present similarity assessment techniques to support part family classification for machined parts. These exploit the multiple feature decompositions obtained by the feature recognition method using convex decomposition. Convex decomposition provides a hierarchical volumetric representation of a part, organized in an outside-in hierarchy. It provides local accessibility directions, which supports abstract and qualitative similarity assessment. It is converted to a Form Feature Decomposition (FFD), which represents a part using form features intrinsic to the shape of the part. This supports abstract and qualitative similarity assessment using positive feature volumes. FFD is converted to Negative Feature Decomposition (NFD), which represents a part as a base component and negative machining features. This supports a detailed, quantitative similarity assessment technique that measures the similarity between machined parts and associated machining processes implied by two parts' NFDs. Features of the NFD are organized into branch groups to capture the NFD hierarchy and feature interrelations. Branch groups of two parts' NFDs are matched to obtain pairs, and then features within each pair of branch groups are compared, exploiting feature type, size, machining direction, and other information relevant to machining processes. This paper, the first one of the two companion papers, describes the similarity assessment methods using convex decomposition and FFD.

• Korean Journal of Mathematics
• /
• 제6권2호
• /
• pp.205-212
• /
• 1998

We investigate the behavior of $L^2$ harmonic one forms on complete manifolds and as an application, we show the space of $L^2$harmonic one forms on a complete Riemannian manifold of nonnegative Ricci curvature outside a compact set with bounded $n/2$-norm of Ricci curvature satisfying the Sobolev inequality is finite dimensional.

• Journal of Species Research
• /
• 제6권spc호
• /
• pp.215-219
• /
• 2017

Two species new for Korea, Scolopocryptops nigrimaculatus Song, Song and Zhu, 2004 and Scolopocryptops mushashiensis Shinohara, 1984 are reported from South Korea. The Korean occurrance of S. nigrimaculatus is the first record of the species outside China, while S. mushashiensis has been known only form its type locality in Japan till now.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.150-154
• /
• 2000

Coloring admixture is used for take color inside and outside of mortar and concrete, differently form pigment and spray paint take color limited surface. In our country, Using the coloring admixture is very slight and regulation is not yet about it. But that is expected the increase with raising the standard of living. Especially it is used to civil structure like dam and seawall for the environment harmony. Then we observe, in this experiment, the effect of coloring admixture on the material properties of color concrete and propose the suitable mix-proportion of color concrete.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.63-66
• /
• 1999

MF membrane element was specially designed for water purification and VSA process which can solve the fouling problem. Especially VSA process is developed for the SK Chemical's asymmetric microfiltration hollow fiber membranes. In case of outside-to-in filtration process, MF membrane element showed the excellent flux stability caused by cleaning ability of VSA process. Simultaneous back- washing with VSA considerably enhances cleaning efficiency. Form the result, the possibility of the replacement of chemical coagulation and sand filtration process with newly developed VSA process was revealed.

• Environmental Engineering Research
• /
• 제10권1호
• /
• pp.22-30
• /
• 2005

Nitrite accumulation is not unusual in batch processes such as sequencing batch reactor (SBR) with high-strength of ammonium or nitrate wastewaters. A possible mechanism of nitrite inhibition on Acinetobacter was depicted in a biochemical model, which the protonated species, nitrous acid form of nitrite, affects proton relating transport at the proton-pumping site crossing the cell membrane under unlimited carbon and phosphorus conditions. This effect exerts inhibition of phosphorylation under aerobic condition and yields low APT/ADP ratio, consequently decrease poly-P synthesis and phosphorus uptake from outside the cell in the model.

• 한국건축시공학회지
• /
• 제20권1호
• /
• pp.53-60
• /
• 2020

본 논문은 동절기 콘크리트 보양 시 투입되는 에너지(전력) 소비량과 콘크리트 발열량 변화를 통해 단열갱폼의 단열성능을 검토하고자 하였다. 실험결과에 따르면, 일반갱폼은 콘크리트 타설 이후 12시간동안 에너지(전력) 소비가 3회 발생하게 된다. 반면 단열갱폼은 콘크리트 타설 후 21시간 동안 에너지(전력) 소비가 발생되지 않았다. 최종 전력 소비량은 일반갱폼이 단열갱폼보다 3.7배 높게 나타나 에너지(전력) 소비에서 단열갱폼의 우수한 성능을 확인할 수 있었다. 발열량 검토결과는 일반갱폼에서 콘크리트 타설 후 외기 온도변화에 따라 발열량이 크게 변하는 것을 알 수 있었다. 하지만 단열갱폼의 경우 프레임 일부에서 미비한 열손실이 발생했을 뿐 콘크리트 타설 직후부터 거푸집 탈형까지 일정한 발열패턴을 보여주고 있었다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.6344-6353
• /
• 2014

지식산업센터는 제조업의 공장 중심에서 산업과 사회의 변화로 지식기반 및 정보통신 등 다양한 용도를 포함하게 되었다. 본 연구는 지식산업센터 관련 제도를 바탕으로 세 시기로 구분하며 선행연구를 통해 배치유형과 외부공간구성요소를 도출하고 사례를 분석하여 배치와 외부공간계획의 기본 방향을 제시하고자 한다. 연구결과, 첫째, 1999년 이전에는 차량중심으로 건물배치가 이루어졌지만 대지의 형태에 따라 중앙배치, 편측배치로 이루어졌다. 둘째, 분산배치는 저층부인 지원시설을 통합하고 고층부 공장동을 분산배치하여 부분통합배치로 건물의 단일화가 이루어졌다. 셋째, 1999년 개정된 건축법에 의해 준공업지역의 공개공지 활성화를 시작으로 외부공간이 넓어지고 건축면적이 줄어들면서 외부공간구성이 오피스나 오피스텔과 같은 업무시설의 계획기법과 유사하게 변화되고 있다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제9권1호
• /
• pp.53-60
• /
• 2003

In this study, I investigate the critical evaluation elements at the architectural competition held nationwide in Germany. These evaluation elements, which can be regarded as the important design evaluation criteria, are selected by the design competition committee. Generally, in Germany the design competition committee consist of professors and famous architects who have theoretical and practical abilities with their own office. I classify and analyze the critical evaluation elements of seventy committee members, working on the selected nine prize-winners in Germany from 1997 to 2001. I conclude that the critical evaluation elements, ordered by frequency are : (1)circulation, (2)context, (3)function, (4)landscape & outside space, (5)organization of space, (6)arrangement of building, (7)form, arrangement of building, (7)form, (7)growth & change, (9)elevation design, (10)utilization of natural light. These design evaluation growth & change, (9)elevation design, (10)utilization of natural light. These design evaluation criteria for Hospital Architecture in Germany also can be applied to the evaluation methods of the korean Healthcare facility design.