• 한국가스학회지
• /
• 제13권6호
• /
• pp.39-43
• /
• 2009

가솔린 엔진은 전 세계적으로 중소형 및 대형차 등 전반적으로 사용되고 있으며, 장기적으로 차량 부하에 따른 배기가스의 증가가 주변 환경에 대한 위협이 가중되고 있어 여기에 대한 대처가 필요하다. CNG엔진은 기존의 가솔린 SI 엔진에 비하여 유해 배출가스 농도가 적어 다른 연료에 비해여 청정연료로서 유리하며, 많은 관련 연구자들이 여기에 대한 여러 논문을 통하여 잠재적 청정연료로서 확인되었다. 출력과 열효율의 측면에서 약간 가솔린 연료에 비하여 떨어지지만 일산화탄소와 탄화수소 배출량은 유리하며, 질소산화물은 약간 증가하는 현상이 나타났다. 본 논문에서는 기존 가솔린엔진과 CNG엔진의 배출물을 비교 검토하였다.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.8-14
• /
• 2013

천연가스에 수소를 첨가하는 수소-천연가스 혼합연료 (HCNG) 엔진 기술은 수소의 빠른 화염속도와 넓은 가연범위를 이용하여 출력 및 배기성능을 최적화하는 기술로서 희박연소 한계를 증가시킴으로써 열효율의 개선은 물론 유해배출물의 저감을 얻을 수 있다. 그러나 과급장치를 사용하는 희박연소 엔진의 경우 전부하 운전조건에서 희박연소 한계의 증가는 충분한 공기량을 공급할 수 있도록 과급용량의 증가가 선결되어야 구현될 수 있다. 본 연구에서는 HCNG 엔진 개발의 일환으로 과급시스템의 변경에 의한 엔진의 출력특성을 파악하고, 과급용량 증대의 적용가능성을 검토하고자 하였다. 터보차저가 과급압력의 증대 보다는 유량이 증가된 영역에서 효율이 높게 설계된 경우 농후한 혼합기 조건에서는 과급압력이 감소되더라도 제원상의 출력을 만족하며 효율적인 운전이 가능하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1079-1081
• /
• 2007

An L-band Linear Accelerator System for E-beam sterilization is under construction for bio-technology application. The klystron-modulator system as an RF microwave source has an important role as major components to offer the system reliability for long time steady-state operations. A PFN line type pulse generator with a peak power of 71.5-MW, $7\;{\mu}s$, 285 pps is required to drive a high-power klystron. The high power pulse transformer has a function of transferring pulse energy from a pulsed power source to a high power load. The pulse transformer producing a pulse with a peak voltage of 275 kV is required to produce 30-MW peak and 60 kW average RF output power at the frequency of 1.3-GHz. We have designed the high power pulse transformer with 1:13 step-up ratio. The peak and average power capability is 71.5-MW (275 kV, 260 A at load side with $7\;{\mu}s$ pulse width) and 130 kW, respectively. In this paper, we present measurements and its analysis on the design parameters, and an initial test result as well as a design concept on the high-power pulse transformer.

• 폴리머
• /
• 제29권1호
• /
• pp.41-47
• /
• 2005

디메틸 테레프탈레이트(DMT)와 1,3-프로판디올(PDO)을 175~190 $^{\circ}C$ 사이의 일정 온도에서 티타늄부톡사이드(TBO) 촉매를 사용하여 에스테르교환반응 속도에 대해서 조사하였다. 에스테르교환반응 정도는 반응기 밖으로 유출되어 나오는 메탄올의 양으로 결정하였으며, 메탄올의 수득률은 반응온도, PDO/DMT의 몰비 및 촉매농도가 증가할수록 증가하였다. 반응차수는 DMT, PDO 및 촉매의 농도에 대해 각각 1차 반응이며, 총괄차수는 3차 반응이었다. 반응속도상수로 계산된 활성화에너지는 26.93 kcal/mole 이었으며, 생성된 비스(2-히드록시트리메틸)테레프탈레이트(BHTMT)의 용융온도는 85.2 $^{\circ}C$, 용융열은 141.3 J/g 이었다.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.86-94
• /
• 2000

This study was performed to investigate types and formation mechanism of cracks in two Al alloy welds, A5083 and A7N01 spot-welded by pulse Nd : YAG laser, using SEM, EPMA and Micro-XRD. In the weld zone, three types of crack were observed : center line crack({TEX}$C_{C}${/TEX}), diagonal crack({TEX}$C_{D}${/TEX}), and U shape crack({TEX}$C_{U}${/TEX}). Also, HAZ crack({TEX}$C_{H}${/TEX}) was observed in the HAZ region, furthermore, mixing crack({TEX}$C_{M}${/TEX}) consisting of diagonal crack and HAZ crack was observed. White film was formed at th hot crack region in the fractured surface after it was immersed to 10% NaOH water. In the case of A5083 alloy, white films in {TEX}$C_{C}${/TEX} crack and {TEX}$C_{D}${/TEX} crack region were composed of low melting phases, {TEX}$Fe_{2}SiAl_{8}${/TEX} and eutectic phases, $Mg_2$Al$_3$ and $Mg_2$Si. Such films observed $CuAl_2$, {TEX}$Mg_{32}(Al,Zn)_{3}${/TEX}, MgZn$_2$, $Al_2$CuMg and $Mg_2$Si were observed in the whitely etched films near {TEX}$C_{C}${/TEX} crack and {TEX}$C_{D}${/TEX} crack regions. The formation of liquid films was due to the segregation of Mg, Si, Fe in the case of A5083 alloy and Zn, Mg, Cu, Sim in the case of A7N01 alloy, respectively. The {TEX}$C_{C}${/TEX} and {TEX}$C_{D}${/TEX} cracks were regarded as a result of the occurrence of tensile strain during the welding process. The formation of {TEX}$C_{M}${/TEX} crack is likely to be due to the presence of liquid film at the grain boundary near the fusion line in the base metal as well as in the weld fusion zone during solidification. The {TEX}$C_{U}${/TEX} crack is considered a result of the collapsed keyhole through incomplete closure during rapid solidification.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.68-73
• /
• 2009

Recently, as titanium and titanium alloys are being increasingly used in wide areas, there are on-going researches to obtain high quality weld zone. In particular, growing interest is being drawn to laser welding, which involves low heat input and large aspect ratio in various welding processes and can facilitate shield in atmospheric condition compared with electron beam welding. The first report covered the analysis of embrittlement by the bead color of weld zone through quantitative analysis of oxygen and nitrogen and measurement of hardness as basic experiment to apply laser welding to titanium. Results indicated that the element that affect embrittlement the most was nitrogen, and as embrittlement and oxygenation go on, bead color changed to silver, gold, brown, blue and gray. This study performed butt welding of pure titanium and STS304 by using 1kW CW Nd:YAG laser, and to find out basic physical properties, evaluated welding performance by laser output, welding speed, root gap and misalignment etc, and examined mechanical properties through tensile stress and Erichsen test. The reason particles of pure titanium welded metal and HAZ are greater than STS304 is because they are pure metal and do not include many impure elements that work as nuclei in case of resolidification, thus becoming coarse columnar crystals eventually. In addition, the reason STS304 requires more energy during welding than pure titanium is because the particle size of base metal is smaller.

• Journal of Advanced Marine Engineering and Technology
• /
• 제19권1호
• /
• pp.60-70
• /
• 1995

In the field of marine transportation the energy saving is one of the most important factors for profit. In order to reduce the fuel oil consumption the ship's propulsion efficiency must be increased as much as possible. The propulsion efficiency depends upon a combination of an engine and a propeller. The propeller has better efficiency as lower rotational speed. This situation led the engine manufacturers to design the engine that has lower speed, longer stroke and a small number of cylinders. Consequently the variation of rotational torque became larger than before because of the longer delay-time in the fuel oil injection process and an increased output per cylinder. As this new trends the conventional mechanical-hydrualic governors for engine speed control have been replaced by digital speed controllers which adopted the PID control or the optimal control algorithm. But these control algorithms have not enough robustness to suppress the variation of the delay-time and the parameter pertubation. In this paper we consider the delay-time and the perturbation of engine parameters as the modeling uncetainties. Next we design the controller which has zero offset in steady state engine speed, based on the two-degree-of-freedom control theory and $\mu$-synthesis. Thd validity of the controller is investigated through the response simulation. We use a personal computer and an analog computer as the digital controller and the engine (plant) part respectively. And, we certify that the designed controller maintains its performance even though the engine parameters may vary.

• 한국광학회지
• /
• 제26권2호
• /
• pp.103-109
• /
• 2015

진폭 분할식 간섭계에서는 입력 빔을 빔가르개(BS)로 분리하고 서로 다른 경로를 거쳐 전파하게 한 다음 두 빔을 중첩시켜 간섭 효과를 일으킨다. 본 논문에서는 손실이 없는 유전체 층들로 이루어진 BS에서 반사와 투과로 분리된 두 광파 사이의 위상관계에 대해 연구하였다. 적절한 기준면에 대해 위상을 정의하면 BS의 층 구조에 관계 없이 투과광과 반사광 사이에는 일정한 위상차가 있다는 것을 알 수 있었다. 이 결과는 일반적인 Stokes 관계식으로 명백히 주어지나, 본 논문에서는 대표적인 대칭적/비대칭적 구조를 가진 두 BS 층에 대해 수치적으로 이를 증명해 보았다. 이 위상 관계로 인해 간섭계에서는 출력광의 중첩 상태(보강 혹은 상쇄 간섭)가 결정되고, 빛 에너지는 보존된다는 당연한 결과를 얻을 수 있었다.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.63-71
• /
• 2021

Using fossil fuels in existing industrial systems causes a variety of social problems. Recently, many studies have been conducted on bio-refineries, which aim to actively utilize biomass to reduce the use of fossil fuels and solve various social problems. Among them, research using microalgae as a third-generation biomass has attracted considerable attention. Microalgae use inorganic matter to produce organic matter, and cell destruction is necessary to extract useful organic materials from microalgae. The extracted organic materials are currently used in various industrial fields. Numerous cell-destruction methods exist. We have investigated cell disruption by sonication, especially its efficiency. Ultrasound is a sound wave with frequencies above 20 kHz, and destroys cells by sending high energy through a cavitation that occurs, according to the characteristics of the sound wave. The Dunaliella salina microalgae used in this study was cultured in a flat-type photobioreactor. Experiments were performed using a batch low-frequency processing device. Logistic model was applied to analyze the results of cell-destruction experiments using ultrasound. The proper conditions for the most efficient cell destruction were OD 1.4(microalgae concentration)), 54watt(output power) and 200mL(microalgae capacity).

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3327-3334
• /
• 2021

Present electric grids are advanced to integrate smart grids, distributed resources, high-speed sensing and control, and other advanced metering technologies. Cybersecurity is one of the challenges of the smart grid and nuclear plant digital system. It affects the advanced metering infrastructure (AMI), for grid data communication and controls the information in real-time. The research article is emphasized solving the nuclear and smart grid hardware security issues with the integration of field programmable gate array (FPGA), and implementing the latest Time Authenticated Cryptographic Identity Transmission (TACIT) cryptographic algorithm in the chip. The cryptographic-based encryption and decryption approach can be used for a smart grid distribution system embedding with FPGA hardware. The chip design is carried in Xilinx ISE 14.7 and synthesized on Virtex-5 FPGA hardware. The state of the art of work is that the algorithm is implemented on FPGA hardware that provides the scalable design with different key sizes, and its integration enhances the grid hardware security and switching. It has been reported by similar state-of-the-art approaches, that the algorithm was limited in software, not implemented in a hardware chip. The main finding of the research work is that the design predicts the utilization of hardware parameters such as slices, LUTs, flip-flops, memory, input/output blocks, and timing information for Virtex-5 FPGA synthesis before the chip fabrication. The information is extracted for 8-bit to 128-bit key and grid data with initial parameters. TACIT security chip supports 400 MHz frequency for 128-bit key. The research work is an effort to provide the solution for the industries working towards embedded hardware security for the smart grid, power plants, and nuclear applications.