• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1191-1196
• /
• 2009

The T-s chart of air displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. In previous study, the software analyzing 31 kinds of values in water system and 32 kinds of values in air-conditioning system were developed. In this study, the software drawing 13 kinds of quantity of state on air properties as ideal gas and analyzing 25 kinds of values in any air system was developed. The 13 kinds of quantity of state on air properties are temperature, pressure, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, and velocity of sound, and the 25 kinds of values including 13 kinds are mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, reversible work, lost work, and relative humidity. The developed software can draw any range of chart and analysis any state or process on air system. Also, this supports various document-editing functions such as power point. We wish to this chart is a help to design, analysis, and education in air system field.

• Journal of Information Technology Services
• /
• v.18 no.2
• /
• pp.1-16
• /
• 2019

Social media is one of the important marketing channels for companies, changing the way interacting with customers. Marketers attract participation from customers' in social media platforms by producing branded content, which helps them gain various marketing results such as brand awareness, web traffic, and sales. The number of the empirical studies on the effects of social media on marketing performance is still low although various success stories and studies have been published. In particular, IT companies are trying to attract users onto their websites with social media content and promotions; however, they regard the number of the visitors as a vanity metric, which has little effectiveness. The study examined the Effect of the site introduced via Facebook, a typical social medium, on customers' revisit. Precedent studies proved that revisit, one of forms of major visit for satisfactory results of a website, is suitable for analyzing the operational output on Facebook pages. The results of the study demonstrated that Facebook content has a positive impact on website inflows and revisits. Also, it turns out that the higher the average website visit depth reinforces the positive relationship between the rate of the inflow and that of the site revisit.

• Earthquakes and Structures
• /
• v.17 no.3
• /
• pp.307-315
• /
• 2019

Building prediction and control theory have been drawing the attention of many scientists over the past few years because design and control efficiency consumes the most financial and energy. In the literature, many methods have been proposed to achieve this goal by trying different control theorems, but all of these methods face some problems in correctly solving the problem. The Evolutionary Bat (EB) Algorithm is one of the recently introduced optimization methods and providing researchers to solve different types of optimization problems. This paper applies EB to the optimization of building control design. The optimized parameter is the input to the fuzzy controller, which gives the status response as an output, which in turn changes the state of the associated actuator. The novel control criterion for guarantee of the stability of the system is also derived for the demonstration in the analysis. This systematic and simplified controller design approach is the contribution for solving complex dynamic engineering system subjected to external disturbances. The experimental results show that the method achieves effective results in the design of closed-loop system. Therefore, by establishing the stability of the closed-loop system, the behavior of the closed-loop building system can be precisely predicted and stabilized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.208-210
• /
• 2019

Creating a virtual reality ecosystem is more important than anything else for virtual reality, which has recently been drawing attention as a sector of the fourth industrial revolution. Virtual reality ecosystem consists of content (C), device (D), platform (P), and network (N). While content is key among these, virtual reality depends on input and output devices, so device utilization is very important. Recently, hands-on devices are being developed for realistic experiences. This study presents examples of contents development using VirZOOM, an experienced device, to reduce immersion and motion sickness of VR contents. We look forward to further promoting the development of virtual reality content in the future through this study.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.4
• /
• pp.6-9
• /
• 2021

The 3D industry is drawing attention for its applications in various markets, including architecture, media, VR/AR, metaverse, imperial broadcast, and etc.. The current feature of the architecture we are introducing is to make 3D models more easily created and modified than conventional ones. Existing methods for generating 3D models mainly obtain values using specialized equipment such as RGB-D cameras and Lidar cameras, through which 3D models are constructed and used. This requires the purchase of equipment and allows the generated 3D model to be verified by the computer. However, our framework allows users to collect data in an easier and cheaper manner using cell phone cameras instead of specialized equipment, and uses 2D data to proceed with 3D modeling on the server and output it to cell phone application screens. This gives users a more accessible environment. In addition, in the 3D modeling process, object classification is attempted through deep learning without user intervention, and mesh and texture suitable for the object can be applied to obtain a lively 3D model. It also allows users to modify mesh and texture through requests, allowing them to obtain sophisticated 3D models.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.6-12
• /
• 2023

For the commercialization and standardization of autonomous vehicles, demand for rigorous safety criteria has been increased over the world. In Korea, the number of extraordinary service permission for automated vehicles has risen since Hyundai Motor Company got its initial license in March 2016. Nevertheless, licensing standards and evaluation factors are still insufficient for operating on public roadways. To assure driving safety, it is significant to verify whether or not the vehicle's decision is similar to human driving. This paper validates the safety of the autonomous vehicle by drawing scenario-based comparisons between manual driving and autonomous driving. In consideration of real traffic situations and safety priority, seven scenarios were chosen and classified into basic and advanced scenarios. All scenarios and safety factors are constructed based on existing ADAS requirements and investigated via a computer simulation and actual experiment. The input data was collected by an experimental vehicle test on the SNU FMTC test track located at Siheung. Then the offline simulation was conducted to verify the output was appropriate and comparable to the manual driving data.

• Journal of Wind Energy
• /
• v.13 no.4
• /
• pp.5-16
• /
• 2022

In general, a tripod-shaped foundation secures its verticality by repeating penetration and drawing when suction penetration is performed. These repetitive tasks not only require a skilled operator, but are also less efficient. In this study, an automatic slope control system was developed to verify the slope control performance based on tripod suction in a sandy soil environment. The slope of the tripod suction base was measured, and the relative height of each suction bucket was calculated from the center of the tripod with a formula. The control program reduces the pump output of the suction bucket that penetrates too quickly by controlling the suction pressure of each suction bucket by sending an on/off signal to the suction pump according to the relative height. With such repetitive work, the relative height converges to 0 and the verticality of the structure can be secured while suction penetration is performed. As a result of the experiment, the effect of controlling the slope depending on the optimal limit setting height and penetration depth was confirmed, and a vertical degree within 0.5° was ensured. When installing a tripod suction bucket, the automatic tilt control method using the relative height is efficient without relying on the experience of the operator.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.3-8
• /
• 2009

The traction system has been mainly used for rehabilitation and correction of patients with spine or gait diseases in orthopedics or at home. Some problems could occur in human body when patients forced their training using the traction system. So it needs to measure a traction force and control the training time. However, most of products on market have no sensor measuring traction force. Thus we designed and made a sensor detecting traction force using strain gauge, amplifier for transition to output signal and experiment devices for performance test. We carried out experiment of a sensor detecting a traction force and measured electric responses of it with respect to traction loads. Maximum error was within about 1% for experiments in static condition and the average error was about 0.7% for experiments in dynamic condition. We concluded that it is possible to use the developed sensor for measurement of traction force since the maximum output variation of a sensor detecting a traction force was about 0.3% in $0^{\circ}C-60^{\circ}C$ temperature condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.691-698
• /
• 2014

An L-band single side band(SSB) mixer with CMOS switches and a C-band quadrature voltage-controlled oscillator(QVCO) have been developed using the TowerJazz 0.18-um RFCMOS process. The SSB mixer exhibits a conversion gain of 6.6 ~ 7.5 dB with a 70-dBc image rejection ratio and 65-dBc port isolation. The oscillation frequency range of the QVCO is 6.2 ~ 6.7 GHz with an output power of 4~6 dBm. For measurement, 1.8 V supply voltage is used while drawing 36 mA for the mixer and 23 mA for the QVCO.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.2
• /
• pp.137-145
• /
• 2007

This paper concerns about residential environment analysis program implementation for design and analysis on public housing complexes such that view and daylight analysis processes are automated and integrated into existing design routine to achieve better design efficiency. Considering the architectural design trends this paper chooses ArchiCAD as a platform for a CAD system, which contains the concepts such as integrated object-oriented CAD, virtual building and BIM. Residential environment analysis system consists of three components. The first component is the 3D modeling part defining 3D form information for external geographic contour models, site models and interior/exterior of apartment buildings. The second is the parametric library part handling the design parameters for view and daylight analysis. The last is the user interface for the input/output and integration of data for the environment analysis. Daylight analysis shows rendered images as well as results of daylight reports and grades per time and performs the calculations for floor shadow. It separates the site-only analysis from the analysis of site and exterior environmental parameters. View analysis considers horizontal and vertical view angles to produce view image from each unit and uses the bitmap analysis method to determine opening ratio, scenery ratio and void ratio. We could expect better performance and precision from this residential environment analysis system than the existing 2D drawing based view and daylight analysis methods and overcome the existing one-way flow of design information from 3D form to analysis reports so that site design modifications are automatically reflected on analysis results. Each part is developed in a module so that further integration and extension into other related estimation and construction management systems are made possible.