• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.4
• /
• pp.535-547
• /
• 2019

In this study, the heavy metal analysis in sediments (surface sediments, sediments cores and settling particles) from Shihwa Lake has been carried out to evaluate the changes of metal pollution levels in sediments after the operation of Tidal Power Plant (TPP). The average concentrations of metals in surface sediments sampled in 2015 were 8% (Cd)~31% (Zn, Hg) lower than in 2009 before TPP operation. Results of calculating the pollution load index (PLI) with 8 metals, the PLI value in 2015 showed a 18% decrease compared to 2009. However, Cu, Zn, Pb concentrations of surface sediments in 2015 at the upper region around industrial complex still exceeded the TEL (threshold effect level) values for sediment quality guideline in Korea. After the operation of TPP, the metal contaminated depths were increasing from 15 cm to 30 cm at S6 site and from 8 cm to 20 cm at S7 site, respectively. Our data showed that the mean concentration of heavy metals in core samples decreased but the contaminated depth increased. The average of the total sedimentation flux for particulate matter increased by 3.2 times from 32.5 g/㎡/d in 2009 to 103.5 g/㎡/d in 2015. This showed that the bottom sediments were resuspended by the operation of TPP, resulting in an increase of particulate matter in the water column. These results suggest that the sediments contaminated with heavy metals seem to be resuspended and relocated due to the water current caused by the operation of TPP. Cr, Cu, Zn, Pb and Cd were highly exceeding the TEL values in the upstream region and accumulated more than 40 cm of sediment depth, indicating that heavy metal contamination through industrial activity were still a serious environmental problem of Shihwa Lake. Although the metal pollution of Shihwa Lake has been slightly reduced, the contaminated sediments with heavy metals inside of Shihwa Lake might be discharged to outer sea after the resuspension by TPP operation. It is necessary for the advanced scientific approach and political decision to drastically reduce the heavy metal pollution of the study region.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.236-244
• /
• 2011

Purpose: This study was aimed to compare the margin and internal fitness of 3-unit zirconia bridge cores fabricated by several CAD/CAM systems using replica technique. Materials and methods: Three unit-bridge models in which upper canine and upper second premolar were used as abutments and upper first premolar was missed, were fabricated. Fourty models were classified into 4 groups (Cerasys$^{(R)}$ (Group C), Dentaim$^{(R)}$ (Group D), KaVo Everest$^{(R)}$ (Group K), $Lava^{TM}$ (Group L)), and zirconia cores were fabricated by each company. Sixteen points were measured on each abutment by replica technique. Statistical analysis was accomplished with two way ANOVA and Dunnett T3 (${\alpha}$=.05). Results: In most systems, there was a larger gap on inter margin than outer margin. In the Group K, overall fitness was excellent, but the incisal gap was very large. In the Group C, marginal gap was significantly larger than Group K, but overall internal gap was uniform (P<.05). The axial gap was under $100\;{\mu}m$ in all system. The difference between internal and external gap was small on Group L and C. However, internal gap was significantly larger than external gap in Group D (P<.05). The fitness of canine was better than second premolar among abutments (P<.05). Conclusion: The marginal and internal gap was within the clinically allowed range in all of the three systems. There was a larger gap on second premolar than canine on internal and marginal surface. In most systems, there was a larger gap on occlusal surface than axial surface.

• Korean Journal of Environmental Biology
• /
• v.32 no.1
• /
• pp.35-48
• /
• 2014

In order to estimate the effect of additional nutrients on phytoplankton growth and horizontal phytoplankton community distribution during the autumn season in 2010 and 2011, we investigated the abiotic and biotic factors of surface and bottom waters at 20 stations of inner and offshore areas in Gwangyang Bay, Korea. Also, nutrient additional experiments were conducted to assess additional nutrient effects on phytoplankton assemblage using the surface water. In both years, the total nutrients were high at the enclosed inner bay and the mouth of Seomjin River, whereas it was low at the St.15~20 where in influenced by the surface warm water current from offshore of the bay. On the other hand, nano- and pico-sized Chl. a were gradually increased towards the outer bay and their trends were significant in 2011 than in 2010. The cryptophyta species occupied more than 85% of total phytoplankton assembleges in 2010, whereas their abundance in 2011 remainds to be 1/10 levels of 2010. Following the cryptophata species, the diatom Chaetoceros spp. and Skeletonema-like spp. were found to be dominant species. Further the biosaasy experimental results shows that the phytoplankton biomass in the +N and +NP treatments was higher compared to control and +P treatments and its trend was significant at St.8 and St.20 where nutrient concentration were low. Based on the bioassay and field survey, providing the high nutrients may have stimulated to phytoplankton growth such as S. costatum-like spp.. In particular, opportunistic micro-algae such as Cryptomonas spp. were able to achieve the high biomass under the relatively mid nutrient condition from bottom after break down of seasonal stratification in the Gwangyang Bay.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.647-658
• /
• 2018

The aim of this study is to investigate the seasonal changes of phytoplankton communities based on the environmental changes in a dense oyster farming area (Hansan-Geoje Island) from June to December 2016. The water temperature varied from $14^{\circ}C$ to $28.8^{\circ}C$ and its salinity ranged from 29.4 to 34.2 psu. Nitrate+nitrite was kept at c.a. $3.0{\mu}M$ on the surface layer from June to July, below the concentration limit in August and early September, and then gradually increased from late September. Ammonia was high on July 20 and August 10, and its seasonal characteristics were not clear. Phosphate ranged from 0.01 to $0.7{\mu}M$ on the surface layer, and its seasonal changes were similar to those of nitrate+nitrite. Mean silicate concentrations were $10.7{\mu}M$ on the surface and $15.7{\mu}M$ in the bottom layer, and it was not acted as a limiting factor for the growth of phytoplankton. Among the phytoplankton community, Bacillariophyceae, Dinophyceae and Cryptophyceae was 61.2%, 22.5%, and 13.6%, respectively. In late June, dinoflagellate Prorocentrum donghaiense was dominant in the outer waters(St. T1), later on, Cryptomonas spp. and Chaetoceros spp. were dominant, respectively. From late September to October, diatoms Pseudo-nitzschia spp. and Chaetoceros spp. were stimulated under non-stratified condition after the typhoon. In December, A. sanguinea was found to be $1.7{\times}10^5cells\;L^{-1}$. Seasonally, relative high phytoplankton biomass may be favorable to maintain high production of filter feeder oyster in the dense oyster farming areas of Hansan and Geoje Island.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.749-753
• /
• 2012

In present work, anode support for micro-tubular SOFC was fabricated with outer diameter of 3 mm and characterized with microstructure, mechanical properties and gas permeability. The microstructure of surface and cross section of a porous anode support were analyzed by using SEM (Scanning Electron Microscope) image. The gas permeability and the mechanical strength of anode support was measured and analysed by using differential pressure at the flow rates of 50, 100, 150 cc/min. and using universal testing machine respectively. The unit cell composed of NiO-YSZ, YSZ, YSZ-LSM/LSM/LSCF was fabricated and operated with reaction temperature and fuel flow rate and showed maximum power density of $1095mW/cm^2$ on the condition of $800^{\circ}C$. The performance of single cell for micro-tubular SOFC increased with the increasing the reaction temperature due to the decrement of ohmic resistance of cell by the increment of the ionic conductivity of electrolyte through the evaluation of electrochemical impedance analysis for single cell with reaction temperature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.991-998
• /
• 2013

The fuel injection pipe of a common rail system used in a clean diesel vehicle plays a role in supplying fuel from a rail to the injector of each cylinder connecting the engine under a repeated internal pressure. The fuel injection pressure is increased to over 200 MPa for satisfying EU emission standards and improving fuel efficiency, and a heading process and an autofrettage process are required for preventing folding defects and improving fatigue life. In this study, the flow stress and SN data of the material of the pipe are obtained through a tensile test and a fatigue test. The heading process for checking the folding defects of pipe ends is performed by using FEA. Furthermore, the optimal design of the autofrettage process for improving fatigue life considering not only the compressive residual stresses of the inner surface but also the tensile residual stresses of the outer surfaces of the pipe under the repeated internal pressure is performed by using FEA. To verify the process design, fatigue analysis for the autofrettaged pipe is performed.

• Membrane Journal
• /
• v.23 no.4
• /
• pp.257-266
• /
• 2013

The main purpose of this study is to develop a commercial scale of pervaporative process equipped with hollow fiber membrane modules, being able to effectually purify organic solvent at high temperature well over its boiling point under high vapor pressure. Three constituent technologies have been developed; 1) to fabricate braid-reinforced hollow fiber membrane stable in high pressure and high temperature application, 2) to design and fabricate a commercial scale of hollow fiber membrane module, and 3) to design and fabricate a pilot scale of pervaporation equipment system. The developed hollow fiber membrane possesses a membrane performance superior to the membrane of Sulzer (Germany) which is the most-well known for pervaporation process, and the membrane module equips hollow fiber membranes of $4.6m^2$ and the pervaporation system can treat organic liquid at 200 L/h, which is based on the dehydration of 95 wt% isopropyl alcohol (IPA). Since the membrane module is designed to flow in and pass through the inside of individual hollow fiber membrane, not to involve both the formation of feed's dead volume observed in flat-sheet membrane module and the channeling of feed occurring inside hollow fiber bundle which lower membrane performance seriously, it showed excellent separation efficiency. In particular, the module is inexpensive and has less heat loss into its surrounding, in compared with flat-sheet membrane module. In addition, permeant can be removed effectively from the outer surface of hollow fiber membrane because the applied vacuum is conveyed uniformly through space between fibers into respective fiber, even into one in the middle of the hollow fiber bundle in which the space between fibers is uniform in distance. Since the hollow fiber membrane pervaporation system is the first one ever developed in the world, our own unique proprietary technology can be secured, preoccupying technical superiority in export competitive challenges.

• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.295-307
• /
• 2006

Objective: The purpose of this study was to compare the histological and biomechanical characteristics of self-tapping and self-drilling microscrew implants. Methods: 112 microscrew implants (56 self-drilling and 56 self-tapping) were placed into the tibia of 28 rabbits. The implants were loaded immediately with no force, light (100 gm), or heavy force (200 gm) with nickel-titanium coil springs. The animals were sacrificed at 3- and 5-weeks after placement and histologic and histomorphometric analysis were performed under a microscope. Results: All microscrew implants stayed firm throughout the experiment. There was no significant difference between self-drilling and self-tapping microscrew implants both in peak insertion and removal torques. Histologic examinations showed there were more defects in the self-tapping than the self-drilling microscrew implants, and newly formed immature bone was increased at the interface in the self-tapping 5-week group. There was proliferation of bone towards the outer surface of the implant and/or toward the marrow space in the self-drilling group. Histologically, self-drilling microscrew implants provided more bone contact initially but the two methods became similar at 5 weeks. Conclusion: These results indicate the two methods can be used for microscrew implant placement, but when using self-tapping microscrew implants, it seems better to use light force in the early stages.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.5 no.1
• /
• pp.87-93
• /
• 1969

A study has been made on phenomena of fertilization, hair genesis, and development of such forma of cotton flower as Mok Po 5, Red Leaf, Paymaster, Acala 1517w. 1) The pollen occurs to germinat at 4 hrs after its pollination and reaches the base of style 10 hrs. later, when 18 hrs elapsed, it gets enter at micropyle passes through placenta. 2) There may remain only one synergid as another one is occupied by pollen tube when it enters micropyle. 3) The fertilization completed at 18-48 hrs. after pollination. It was observed that Mok Po5 is the fastest, somewhat slower in Red Leaf and the slowest is the case of Paymaster in its speed. 4) Wool hair is formed by development of daughter cell which is. due to epidermal cell division' it starts its way right before blooming. 5) Wool hair is the most in its number covering about 60-80 within one hour ofter pollination and finishes its forming within 4-6 hours. The number is more abunbant at basal portion of ovule and rather at outer surface than at inner one of it. 6) The average length of wool hair checked at different time limit is as follows. 2.7-8.3$^{\mu} m$ 1 hr after pollination. 43.3-263.7$^{\mu} m$ 24-48 hrs. after pollination. The growth speed both of Mok Po 5 and Red Leaf get nearly same value but Paymaster is somewhat slower in its speed.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.89-99
• /
• 2009

To investigate the morphological characteristics of spermatozoa of the grey red-blacked vole (Clethrionomys rufocanus) belongings to the subfamily Cricetinae, subgenus Clethrionomys were examined by scanning and transmission electron microscopes. The sperm head of C. rufocanus was an ax or hatchet in shape with a curved single dorsal hook. The total length of C. regulus sperm was 95.8 ${\mu}m$. The length of sperm head was 7.8 ${\mu}m$, and the tail (88.0 ${\mu}m$) consisted of four major segments: the neck (1.0 ${\mu}m$), middle piece (22.0 ${\mu}m$), and principal piece plus end piece (65.0 ${\mu}m$), respectively. The segmented columns were about 10~12 in number. The number of gyres of mitochondria ranged from about 170 to 178. The post-nuclear cap occupied about a half of nucleus. The equatorial segment is located between the post-nuclear cap segment and acrosomal cap on the nuclear surface. Nos. 1, 5 and 6 of the outer dense fibers were larger than the others. A fibrous sheath and longitudinal column of the principal piece were in evidence, but the fibrous sheath was not seen at the end piece. In conclusion, the morphological structures of sperm head and tail may be useful information to patterning of sperm evolution and classifying of species.