• Industry Promotion Research
• /
• v.4 no.2
• /
• pp.1-8
• /
• 2019

This research is a technology for cutting the insulation of the busbar (busbar) installed in the distribution panel or switchboard, the results of the study, first, the cutting unit and frame of the cutting unit including a housing attached to the upper and lower cutters, respectively Busbar coating laser cutting machine is installed on the top, characterized by consisting of a stopper for adjusting the coating cutting distance of the busbar. Second, the frame is installed with the guide bar in the longitudinal direction at the top so as to be located at the rear side end of the table, the post is installed vertically at the front and rear at the upper middle part, respectively, and cut to the table at the outer side of the front post. It is characterized by the formation of holes. Third, the supporter is fixedly installed on the upper part of the guide bar arranged in the frame, and is characterized by consisting of a cylinder and a support plate. The meaning of this study is to prevent the safety accidents of workers, to improve the efficiency of cutting work, and to prevent the occurrence of scratches on the surface of the busbar.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.991-998
• /
• 2013

The fuel injection pipe of a common rail system used in a clean diesel vehicle plays a role in supplying fuel from a rail to the injector of each cylinder connecting the engine under a repeated internal pressure. The fuel injection pressure is increased to over 200 MPa for satisfying EU emission standards and improving fuel efficiency, and a heading process and an autofrettage process are required for preventing folding defects and improving fatigue life. In this study, the flow stress and SN data of the material of the pipe are obtained through a tensile test and a fatigue test. The heading process for checking the folding defects of pipe ends is performed by using FEA. Furthermore, the optimal design of the autofrettage process for improving fatigue life considering not only the compressive residual stresses of the inner surface but also the tensile residual stresses of the outer surfaces of the pipe under the repeated internal pressure is performed by using FEA. To verify the process design, fatigue analysis for the autofrettaged pipe is performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.657-666
• /
• 2017

In this study, factor analysis was performed to reduce the friction in the elevation motion of a stand for a 50-inchtelevision. Pipe type cross-section control was used for accurate positioning control of the piston rod. The pipe type was also compared with a labyrinth-type crosssection for the orifice. The frictional force was then reduced using gas seal lip technology. Specifications were chosen, and a volume compensation experiment was carried out using an apparatus for compensating the volume of the cylinder, which is compressed by the volume of the piston rod. Based on CAE and experimental considerations, the labyrinth-type orifice is preferred for reducing friction. For the gas seal lip technology, outer and inner diameters of ${\Phi}20$ and ${\Phi}8$ for the hollow rod were more appropriate when assuming the weight of a 50-inch television to be 30kgf. The third is that the result of total consideration in stability problem and performance of volume compensation for specification decision and volume compensation experiment is determined the final speculation of hollow rod ?8x?4 and riveting system. The last is that the labyrinth orifice is not founded that of the ${\O}0.4{\sim}0.6$ orifice both tests on 300 mm intervals.

• Korean Journal of Oriental Medicine
• /
• v.12 no.1
• /
• pp.23-38
• /
• 2006

The taxonomic list of specific features in external and internal shape and the pattern analysis of Aconitum carmichalei $D_{EBX}$ as the original plant of Aconiti Lateralis Radix Preparata and Aconitum cliiare Dc as the original plant of Aconiti Ciliare Tuber are as follows. 1. Aconitum carmichalei $D_{EBX}$ has tri-palmately parted leaves, petiole in lower leaves, and its ovary has short hair. Whereas Aconitum cliare Dc has $3{\sim}4$ parted leaves, long petiole, and its ovary has not hair. 2. Aconitum carmichalei $D_{EBX}$ has cylinder shape is relatively small in length and diameter, is greyish brown blacky brown in outer surface, greyish $white{\sim}dark$ gray in section. 3. According to the collection place, there is a remarkable difference in the physical shape of herbal states. Aconiti Lateralis Radix Preparate(medicated in Korea) is more transparent blacky brown color than Aconiti Lateralis Fadix Preparata(medicated in Chian). Also Black Aconi Radix(墨附片) has exodermis and White Aconi Radix(白附片) has not. 4. The internal characteristics entirely correspond to in internal shape described in the literatures, Only it is possible to discriminate between black Aconi Radix(墨附片) and White Aconi Radix(白附片) by the existence of cork layer. The classification between Aconiti Lateralis Radix Preparata and Aconiti Ciliare Tuber makes entirely Tuber makes entirely remarkable difference in the physical shape of cambium layer Namely, in shape of cambium layer the kinds of Aconiti lateralis Radix Prepala has horn-like shape and the kinds of Aconiti Ciliare Tuber has circle-like shape. 5. In the peak of examination substance in comparison to Rt of the index material diterpene alkaloid mesaconitine, aconitine, hypaconitine chromatogram Aconiti Ciliare Tuber is higher than in Aconiti Lateralis Radix Preparata This explain that the component changes after the process of medicine. 6. In the Content of mesaconitine, aconitine and hypaconitime Aconiti Ciliare Tuber is higher than Aconiti Lateralis Radix Preparata. 7. In Aconiti Lateralis Radix Preparata, aconitine, hypaconitine and mesaconitine each appears in Rf 0.46, 0.54, 0.32. But except Aconiti Ciliare Tuber the band does not appear. For the future, such results will be used as the basic source of additional research, and a far-reaching comparative study is needed to distinguish between many kinds of same genus-degree of relatedness.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.700-708
• /
• 2012

In order to optimize a method to determine the firmness of Chinese cabbage, hardness of midrib tissues was examined based on their chronological order of emergence. Texture measurement using volodkevich bite jaws gave a consistent and highest regression ($r^2=0.85$) between firmness and the order of leaf emergence, while blade set, cylinder probe, and crisp fracture support rig showed a lower coefficient of determination. Thickness of midrib tissue within an individual head from 16 cultivars of Chinese cabbage was positively correlated with the order of emergence, becoming thinner toward inner leaves. Mean thickness of midrib tissue from the head ranged from 7.74 mm for 'CR-shingshing' and 9.28 mm for 'Norangyeorum'. The covariance of leaf thickness within a head was highly cultivar-dependent, ranging from 23.6% for 'Chihili' and 5.8% for 'Bulam'. Firmness of the midrib tissue, defined as maximum peak height per tissue thickness, became higher from outer to inner leaves, showing $2^{nd}$ order of regression. Mean firmness of the midrib tissue from individual head varied from 1.58 N for 'Rangno' to 3.46 N for 'CR-shingshing'. The $10^{th}$ or $11^{th}$ leaf brought the best correlation coefficient (r = 0.81) between firmness of an individual leaf and the mean firmness of the entire leaves in a head, suggesting a reliable and rapid method to estimate the firmness of a head in lieu of examining all leaves in the head. The relationship between firmness of midrib tissue and dry mass ($r=0.70^{**}$) as well as cell wall content ($r=0.58^*$) of the head were positively correlated. Results obtained from the present study suggested that a new method to determine midrib firmness would enable to clarify the relationship between textural quality of fresh Chinese cabbage and their processed product, 'Kimchi'. It will also be important to apply this method to screen textural quality of various genotypes under breeding programs.