• Korean Journal of Agricultural Science
• /
• v.39 no.3
• /
• pp.327-334
• /
• 2012

This study was carried out in the Chungnam National University grassland experimental field from October, 2007 to December, 2009 in order to find out the growth characteristics, seasonal anthesis distribution and botanical composition of the wildflowers which were altogether composed of 70% sheep fescue and 30% wildflowers. The experimental wildflower species contained 30 species in total to which sheep fescue (fundamental turfgrass), 8 native wildflowers, and 22 introduced wildflowers belonged. At the time of the anthesis of the wildflowers, the average length was 28.3 cm one year later and 34.5 cm two years later. They bloomed out into eight colors, but into simplified two colors during August, September, and October. The blooming season leant toward May and June and from August there was lots of difficulty in the wildflower blooming and the maintenance of their consistency. Especially, at the age of two (2009), the annual wildflowers after wintering were reduced but on account of domestic wildflowers the color, seasonal distribution, and consistency showed improved compared with those of one-year-old wildflowers. The annual ration of wildflowers, sheep fescue, and weed came to 25%, 61%, and 14% each one year later (2008) and 24%, 62%, and 14% each two years later (2009). Based on this result, cultivating wildflower grassland in the combination of native wildflowers and introduced wildflowers is estimated to be the proper method in the aspect of interaction.

• Journal of Korean Society for Quality Management
• /
• v.29 no.3
• /
• pp.39-48
• /
• 2001

Preventive maintenance(PM) is an action taken on a repairable system while it is still operating, which needs to be carried out in order to keep the system at the desired level of successful operation. In this paper, we consider a Bayesian approach to determine an optimal periodic preventive maintenance policy. When the failure time is Weibull distribution with uncertain parameters, a Bayesian approach is established. Some numerical examples are presented for illustrative purpose.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.425-432
• /
• 2004

Large studs were suggested not only for the design of steel-concrete composite bridges with simplified sections but also for the shear connection in precast decks requiring uniform distribution of shear pockets. Based on the push-out test results on studs with diameters of more than 25 mm, partial composite beams with 40%-degree shear connection were fabricated, and static tests were performed. The ultimate strength and horizontal shear load redistribution of partial composite beams, which have parameters of stud shank diameters and distribution, were evaluated, and group failure in the shear span was observed. Since the flexural strength of composite beams are dependent on the strength of their shear connection, the strength of the stud connection was estimated and it showed considerably higher shear strength. From the load-slip curves, the sufficient ductility and load redistribution of large studs were confirmed. Uniformly distributed large studs can provide proper ultimate behavior of composite beams.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.2
• /
• pp.47-55
• /
• 2022

The objective of this study was to analyze the effect of the duration and time distribution of probability rainfall on farmland inundation for the paddy fields in the drainage improvement project site. In this study, eight drainage improvement project sites were selected for inundation modeling. Hourly rainfall data were collected, and 20- and 30-year frequency probability rainfalls were estimated for 14 different durations. Probability rainfalls were distributed using Intensity-Duration-Frequency (IDF) and Huff time distribution methods. Design floods were calculated for 48 hr and critical duration, and IDF time distribution and Huff time distribution were used for 48 hr duration and critical duration, respectively. Inundation modeling was carried out for each study district using 48 hr and critical duration rainfalls. The result showed that six of the eight districts had a larger flood discharge using the method of applying critical duration and Huff distribution. The results of inundation depth analysis showed similar trends to those of design flood calculations. However, the inundation durations showed different tendencies from the inundation depth. The IDF time distribution is a distribution in which most of the rainfall is concentrated at the beginning of rainfall, and the theoretical background is unclear. It is considered desirable to apply critical duration and Huff time distribution to agricultural production infrastructure design standards in consideration of uniformity with other design standards such as flood calculation standard guidelines.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1803-1805
• /
• 1998

Electron temperature, electron density and electron energy distribution function were measured in Radio-Frequency Inductively Coupled Plasma(RFICP) using a probe method. Measurements were conducted in argon discharge for pressure from 10 mTorr to 40 mTorr and input rf power from 100W to 600W and flow rate from 3 sccm to 12 sccm. Spatial distribution electron temperature and electron density and electron energy distribution function were measured for discharge with same aspect ratio(R/L=2). Electron temperature was found to depend on pressure, but only weakly on power. Electron density and electron energy distribution function strongly depended on both pressure and power. Electron density and electron energy distribution function increased with increasing flow rate. Radial distribution of the electron density and electron energy distribution function were peaked in the plasma center. Normal distribution of the electron density electron energy distribution function were peaked in the center between quartz plate and substrate. These results were compared to a simple model of ICP, then we found out the generation mechanism of Radio-Frequency Inductively Coupled Plasma.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.221-228
• /
• 2009

For a stable supply of electric power, periodical inspection of the electric facilities and repair of the distribution lines are required. In case of any unexpected accidents, looped operation among distribution lines may be necessary in order to supply electricity through the sound lines, separating the faulted lines. As a result of this study, it was found that normal looped operation became impossible when phase difference of the looped distribution lines is more than 3 degrees compared with the voltage supply of the distribution lines. Therefore, for a stable supply of electric power to Chuncheon, it is judged to be desirable that looped operation of the distribution lines coming from the same substation M. Tr Bank shall be performed in principle and in case of looped operation with the substation of different system, looped operation among the lines shall be performed after voltage regulation of the substation M. Tr Bank, maintaining similar voltages and load supply volume in order to avoid phase difference through checking the operation conditions of each substation M. Tr Banks. And when looped operation among the distribution lines is scheduled, voltage regulation schedule has been established so far by calculating maximum supply volume through the transformer of the substation and the maximum load volume through the distribution lines but in the future, looped operation of the distribution lines shall be carried out by removing voltage difference with regulating tap or load of the surrounding transformers, with giving prior notice to the substation operators.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.21-31
• /
• 2010

In the architectural design technologies being changed recently, there is the study to develop the way that will enable the designers to get access logically to the processes of deciding the values of design factors which depend on the experience of the designers. This study, which is one part of those studies, has been carried out to develop the model that can decide the values logically for the design factors having the character that the design values are changed by the time variation out of design factors involved in the building energy saving design. As a result, the structure of the decision model which can decide the design values logically from the computer simulation that solve the problem by interpreting the real world as the probability distribution, has been established through this study. For the application and verification of these decision model, the case study has been carried out for the outdoor climate factors that stand for the design factors having the time variation.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.19-30
• /
• 2009

In this paper, We propose a method with which we can detect facial components and face in input image. We use eye map and mouth map to detect facial components using eyes and mouth. First, We find out eye zone, and second, We find out color value distribution of skin region using the color around the eye zone. Skin region have characteristic distribution in YCbCr color space. By using it, we separate the skin region and background area. We find out the color value distribution of the extracted skin region and extract around the region. Then, detect mouth using mouthmap from extracted skin region. Proposed method is better than traditional method the reason for it comes good result with accurate mouth region.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.82-86
• /
• 1999

Electron Energy Distribution Function(EEDF) were treasured In Radio-Frequency Inductively Coupled Plasma(RFlCP) using a probe rrethocl Measurerrents were conducted in argon discharge for pressure from 10[mTorr] to 4O[mTorr] and input rf power from 100[W] to 600[W] and flow rate from 3[sccm] to 12[sccm]. Spatial distribution of electron energy distribution function were measured for discharge with same aspoct ratio (R/L=2). Electron energy distribution function strongly depended on both pressure and power. Electron energy distribution function increased with increasing flow rate. Radial distribution of the electron energy distribution function were peaked in the plasma center. Normal distribution of the electron energy distribution function were peaked in the center between quartz plate and substrate. From the results, we can find out the generation mechanism of Radio Frequency Inductively Coupled Plasma. And these results contribute the application of a simple Inductively Coupled Plasma(ICP).a(ICP).

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.23 no.3
• /
• pp.109-121
• /
• 2010

Objectives : This study was performed to analysis the effect of oriental medical care for inpatients with facial paralysis that had visited Dept. of Otolaryngology Oriental medical hospital Dong-eui university. Methods : From January 2008 to September 2010, a clinical study was done on 250 inpatients who were treated as facial nerve paralysis at the Dept. of Otolaryngology Oriental medical hospital Dong-eui university. This study was assessed using the chart analysis. Results : 1. The distribution of sex : female 54.8%, male 45.2%. The distribution of age was pregented that fifty to sixty was the most in 67 cases(26.8%). 2. The distribution of the period of admission : female 12.5 days, male 9.9 days. 3. The distribution of past history : hypertention(18.8%), diabetes-mellitus(10.85%), facial paralysis(9.25%), cerebrovascular disease(4.4%), liver disease(5.6%), hyperlipidemia(1.2%), otitis media(1.2%), herpes zoster(1.2%), cardiac disease(2.45%), thyroid disease(1.2%). 4. The distribution of the region of facial paralysis : Rt(55.36%), Lt(56.52%). 5. Check the mastoid pain : 66.8%(female 73.91%, male 58.04%). 6. Out of prescription(Ko-Bang, 古方), Galgeun-Tang(葛根湯) and Gaejigeogaegayoungchul-Tang was used most in each 34 cases, Daesiho-Tang(大柴胡湯) 30 cases, Galgeungabanha-Tang(葛根加半夏湯) 27 cases, Sihogaeji-Tang(柴胡桂枝湯) 14 cases, Hwanggigaejiomul-Tang 12 cases, Odu-Tang(烏頭湯) 10 cases, Chijadaehwangsi-Tang 10 cases, Gaejigagalgeun-Tang(桂枝加葛根湯) 7 cases, Banhasasim-Tang(半夏瀉心湯) 5 cases, Injinho-Tang(茵蔯蒿湯) 5 cases in order. 7. The distribution of herb group : Mahwang-Jae(麻黃劑) 31.72%, Gaeji-Jae(桂枝劑) 26.00%, Siho-Gae(柴胡劑) 20.70%, Chija-Gae(梔子劑) 7.49%, Buja-Jae(附子劑) 4.41%, Banhahwanggeum-Gae(半夏黃芩劑) 3.08%, Daehwang-Gae(大黃劑) 2.64%, Bockryeong-Gae(茯笭劑) 1.76%, Jisil-Gae(枳實劑) 1.32%, Insam-Gae(人蔘劑) 0.88% in order. 8. The distribution of House-Brackmann grade of admission : Gr Ⅳ 74.85%, Gr.III 13.6%, Gr.V 11.6% in order. 9. The distribution of House-Brackmann grade of discharge : Gr.III 56%, Gr.IV 38.4%, Gr.II 5.6% in order. 10. The average number of OPD follow up is 6.46. Conclusion : This results indicated that oriental medical treatment with Ko-bang(古方) can be an effective way to treat facial paralysis. The more patients we treat with Ko-bang(古方), the more clinical report is accumulated. Then it would be helpful to map out a systematic treatment on facial paralysis.