• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.47-55
• /
• 2013

In the element test for coarse granular materials, the grain size distributions of the materials are often adjusted, in case the grain size of coarse material in the field is larger than the available maximum grain size of the laboratory test equipment. In this study, we carried out the large cyclic triaxial test to evaluate the effect of the grain size distribution adjustment on Young's modulus in small to intermediate strain level. The test results showed that the coarse granular materials with the adjusted grain size distribution underestimated Young's modulus of the original materials. The difference of Young's modulus was larger in small strain level than in intermediate strain level.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.199-201
• /
• 2011

NACA0012 Airfoil was simulated with Computational Fluid Dynamics(CFD) and the aerodynamic characteristics was analyzed for various far-field boundary distances ranging from 10 airfoil chord to 50 chord Drag coefficient distribution was dependent on the far-field distance and circulation, integrated along the loop inside the flow region, was also dependent. It was turned out that some corrections based on the circulation should be added to the far-field boundary condition for accurate airfoil simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.441-448
• /
• 2022

In the distribution system, there are multiple power protection systems such as circuit breakers at substations, and reclosers, minimum circuit ampacities, fault interrupters on distribution lines. They are widely used to prevent partial outages, cascading power failure or blackout so that other healthy systems could maintain the integrity in case of the instant fault or permanent failure on the power lines. However, when a fault happens, it could cause a major black out due to the lack of the protection cooperation between the protection relay of the circuit breaker at a substation and a protection system on the distribution lines. To achieve the power system integrity better, it is required to develop the circuit breaker which can be operational within 1 cycle(16ms). In this study, the high speed circuit breaker which is filled up with eco-friendly gas is developed. This equipment achieved an excellent test results based on IEC 62271-111 standard. It is respected that this equipment would contribute to prevent the wide area blackout by isolating a fault area quicker and faster.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3483-3490
• /
• 2024

The initial size distribution and morphological parameters of sodium aerosols are critical in evaluating the accidental suspended aerosol behaviour in Sodium-cooled Fast Reactor (SFR) containment. Mass-based measurements were more familiar in characterizing the sodium aerosols. Real-time number size distribution measurements are carried out in this study. The sensitivity analysis of sodium aerosol effective density (ρ_e) in deriving the actual number size distributions from the measured Aerodynamic Particle Size Distributions (APSD) and predicting suspended aerosol dynamics is presented. Tests are conducted in a 1 m³ chamber at 47 ± 3% RH for different initial mass concentrations (M₀) of 0.1, 1, and 2.9 g/m³. The initial APSDs measured just after the generation completions are observed to be polydisperse with the count median aerodynamic diameter (CMAD) < 1 ㎛. The literature reported ρ_e values of sodium aerosols, 2.27, 1.362, and 0.61 g/cm³ are used to derive mobility equivalent PSDs from APSD in each test. The real-time number concentration decay and size growth for four different PSDs are measured and compared with the estimate using nodal method-based code to ascertain the actual parameters. The validated parameters CMD = 0.66 ㎛, σ_g = 1.96, ρ_e = 1 g/cm³ and χ = 1 are used for improved estimation of sodium aerosol dynamics in Indian SFR containment with M₀ = 4 g/m³ for severe accident scenarios.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.162-168
• /
• 2004

Service restoration is an emergency control in distribution control centers to restore out-of-service area as soon as possible when a fault occurs in distribution networks. Therefore, it requires fast computation time and high quality solutions for load balancing. In this paper, a load balance index and heuristic guided best-first search are proposed for these problem. The proposed algorithm consists of two parts. One is to set up a decision tree to represent the various switching operations available. Another is to identify the most effective the set of switches using proposed search technique and a feeder load balance index. Test results on the KEPCO's 108 bus distribution system show that the performance is efficient and robust.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.1-7
• /
• 2008

This study is intended to compare physical properties of fluorescent luminaires with ones of LED luminaires so as to analyze fundamental characteristics of LED luminaires. For this, a comparative analysis of uniformity ratio of illuminance and luminance distribution of these two luminaires was made, and materials for applying LED luminaires to interior construction space were prepared. This study was carried out in four stages. First, a theoretical review on LED illumination light source was made compared with the existing luminaires. Second, a mock-up to control experimental variables to meet the objective of this study was manufactured. Third uniformity ratio of illuminance and luminance distribution of each luminaire were measured by using the mock-up. Fourth, a comparative analysis of uniformity ratio of illuminance and characteristics of luminance distribution of the existing fluorescent luminaires and LED ones was made. As a result of the study, the uniformity ratio of illuminance of LED luminaires, 0.559, was higher than one of the existing fluorescent luminaires, 0.522. Namely, it was shown that illuminance distribution of LED luminaires was uniform and global diffuse was good. As a result of measuring luminance distribution, it was found that luminance distribution of LED luminaires was more uniform than one of the existing fluorescent luminaires. The maximum luminance of fluorescent luminaires and LED luminaires over the wall was $180.6[cd/m^2]$ and $155.26[cd/m^2]$ respectively. Namely, the maximum luminance of fluorescent luminaires was higher than one of LED luminaires. The average luminance of fluorescent luminaires and LED luminaires was $44.32[cd/m^2]$ and $58.65[cd/m^2]$. Like this, the average luminance of LED luminaires was higher than one of fluorescent luminaires. Considering these results, it's thought that LED luminaires can give a person in the room a more comfortable working environment than fluorescent luminaires.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.31-69
• /
• 1996

The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.

• Asian Journal of Business Environment
• /
• v.8 no.2
• /
• pp.5-13
• /
• 2018

Purpose - The aim of this study is to investigate the problems, challenges, opportunities and future prospects of Islamic banking and finance in the UK. However, this study brings forward into 3 main purposes. Firstly, to explore the development of financial institutions, products and regulatory reforms. Secondly, to find out the performance of Islamic banking institutions. Lastly, to identify the problems, challenges and Islamic banking future prospects. Research design, data, and methodology - An in-depth literature review was carried out to fulfil the research objectives. Results - The findings point out the basic problems of Islamic banking industry in UK such as unfavorable regulatory environment, unfamiliarity with the Islamic Banking System, lack of portfolio management, absence of liquidity instruments, in need of professional bankers, and blending of approach of Islamic scholars with the approach of the conventional bankers. The findings also indicate that there are greater opportunities in the UK for development and growth of Islamic financial system because Muslim community is eager to take financial products. Conclusions - It is hoped that issues pertaining to Islamic banking products can be resolved through consensus of Shariah scholars. There is need to educate the Muslim community about Islamic financial products and service.

• Journal of Distribution Science
• /
• v.13 no.3
• /
• pp.61-67
• /
• 2015

Purpose - Exports have long been regarded as significant drivers of sustainable competitive advantage and growth among small and medium enterprises (SMEs). The export activities of SMEs are particularly important in the context of export-oriented economies such as Korea. Although many studies have examined the determinants of exports, it is difficult to find empirical studies about the determinants of the export performance of regional SMEs. This study investigates the determinants of export performance in the regional SME context based on an integrated approach that combines the environment factor of industrial organization theory, competitive strategy theory, and the competences of the resource-based view. Research design, data, and methodology - To empirically analyze the determinants of export performance in the regional SMEs, data were collected from firms in the Daegu metropolitan area. Data were collected directly through questionnaire surveys; in addition, secondary financial data were also taken from the KIS-VALUE database. Out of the 175 responses that were received, 143 were considered to be worth examining. After testing the reliability and validity of the variables through multiple items such as environmental turbulence and competitive strategy, hypotheses were verified by using five multi-regression models. These models were: a control model with organizational size and age, an environmental model with technology and market turbulence, a competency model with R&D and foreign distribution channels, a strategy model with product and market differentiation, and an integrated model including all of these variables. Results - First, as a control variable, the organization size has significant positive effects on export performance. Second, technology turbulence based on industrial organization theory has significant positive effects on export performance, but market turbulence does not affect export performance. Third, the foreign market distribution competency of the resource-based view has strong positive effects on export performance, but the R&D competency does not affect export performance. Fourth, the product differentiation strategy from competitive strategy theory positively impacts export performance, but market differentiation does not affect export performance. Finally, in the integrated model, only the foreign distribution competency of the resource-based view has a significant effect on export performance. Conclusions - The empirical results of this study verified the usefulness of the rationales behind the three theories to explain the export performance of the regional SMEs, especially the importance of the foreign market distribution competency from the resource-based view. With regard to practical considerations, this study's implications suggest that the use of technological environmental changes by industries is better than the use of market changes. Further, the use of the product differentiation strategy is more effective than the use of the market-driving strategy, and the distribution channel competency plays a stronger role than the technology-oriented competency with regard to the export performance position of regional SMEs. Future studies should examine relational perspectives, such as trust among channel partners. Therefore, the configuration approach is more useful in enhancing pragmatism by comparing high- and low-export companies.

• Journal of Distribution Science
• /
• v.10 no.10
• /
• pp.25-33
• /
• 2012

Purpose - The Garak agricultural wholesale market ('Garak Market') plays a central role in the distribution of agricultural products in Korea and is important in connecting consumers with producers. However, problems regarding inefficiencies and the high-cost structure of the wholesale market's distribution/logistical system are being raised in relation to severe competition among retailers. Furthermore, the service needs of retailers and market users are not being fulfilled due to the inconsistency of the wholesale market's functions and facilities, thus reducing the competitiveness of the market. In this regard, innovative changes are being requested of the agricultural wholesale market according to changes in the agricultural product distribution environment. In particular, the lack of unloading facilities and the outdated unloading system of the wholesale market must be improved to enhance system efficiency. Research design, data, and methodology - This study observed the problems of the unloading system of the agricultural wholesale market in order to present relevant measures for improvement. The need for unloading auctions was also researched in this study. The survey of 70 forwarders belonging to the producing district distributor association of the Garak market was conducted by post. Additionally, 20 auction dealers and 59 shippers and transporters were individually interviewed. The survey on the need for unloading auctions used five-point Likert Scales. The statistical analysis was conducted with SPSS WIN 12.0 software. Results - First, the wholesale market must employ members of the unloading labor union to allow these employees to directly manage the unloading process. Second, it is crucial to revise regulations to ensure that the principal agent pays the unloading cost according to the standard unloading cost system. Third, the vehicle auction carried out for certain vegetable products must be converted to the unloaded auction system. According to the related interviews with the wholesale market's distribution agents, whereas shippers and transporters recognized the need for unloaded auctions, auction dealers tend to have a negative view of this system. Furthermore, the stated reasons in favor of unloaded cabbage, radish, and other vegetable auctions were prevention of constraint, creation of transparent trade conditions, and reduction of corrected seller tickets. Many of the respondents answered that the transport cost reduction rate in unloaded auctions must be below 20%. Fourth, the unloading system must be mechanized and a detailed, reasonable plan must be provided to settle the existing conflict with the unloading labor union. Conclusions - The proposals in this study are expected to play an important role in improving the cargo handling system of the wholesale agricultural product market in the future. Improving the system is expected to help shore up the competitiveness of the industry. If all the related bodies closely cooperate with each other and work harder, taking advantage of the synergies created by the facility modernization project, the Garak market will play a pivotal role in the distribution of agricultural products.