• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1241-1246
• /
• 2014

일반적으로 감속기, 모터 등과 같은 동력 전달시스템에 의해 발생하는 진동, 소음 등은 취출로봇의 효율성, 내구성, 정밀도와 신뢰성 등을 결정짓게 된다. 본 연구는 유한요소해석을 통하여 취출로봇 구조물의 안전성을 평가하고자 한다. 취출로봇은 사출물을 한 곳에서 다른 곳으로 이송시키는 자동화 로봇이다. 취출로봇 구조는 가로 1300mm, 세로 670.5mm, 높이 670mm 이고, 구조물의 무게는 380kg이다. 자중해석을 통하여 자중과 하중에 의한 변위와 등가응력을 확인하고, 모드해석을 통하여 취출로봇의 고유진동수를 찾는다. 응답해석을 통하여 취출로봇의 고유진동수에 대한 변위와 가속도 응력을 확인하고자 한다. 또한, 취출로봇 구조를 변경해가면서 해석을 반복하여 결과를 확인하고 구조물의 안전성 여부를 판단한다. 이들 해석결과들은 취출로봇의 진동을 저감시키는데 유용하다.

• 동아시아식생활학회지
• /
• 제16권6호
• /
• pp.772-776
• /
• 2006

The purpose of this study was to examine the differences in satisfaction of leisure life and quality of life using standardized evaluation tools developed by WHO. Resource availability when dining out was measured by objective index(time of dining out, dining out expense) and subjective index(perceived satisfaction with time of dining out and dining out expense). In this study, 500 questionnaires(male & female adults) located in Seoul and the metropolitan area were sampled by convenience sampling and gather in 433 sheets of questionnaire. Data was analyzed by frequency analysis, factor analysis, reliability analysis, correlation analysis and regression analysis using SPSS Win 12.0. As a result there was high positive correlation between time of dining out, dining out expense and perceived satisfaction with time of dining out and dining out expense. Moreover, dining out resources impact on leisure life satisfaction and quality of life. Leisure life satisfaction had fairly high effects on quality of life. Since there is an increase in leisure time the desire to improve quality of life while enjoying dining out as a part of leisure life is increasing and as various forms of consumption takes place, it suggests that segmentation of dining out market is necessary and marketing strategy should be established.

• 한국식생활문화학회지
• /
• 제23권3호
• /
• pp.377-387
• /
• 2008

The objective of this study was to use cluster analysis to determine differences in eating-out behavior among grouped clusters of female consumers after each cluster was divided based on lifestyle patterns. The data were collected by interview survey from a biased sample of 1,300 females, ranging from ages 20 to 59, and living in residential districts of Seoul. Reliability analysis, factor analysis, cluster analysis, cross-tabulation analysis, and analysis of variance (ANOVA) were applied to the data. Four lifestyle factors were extracted by lower-division and classified as follows: health condition, consuming, food, and housing lifestyles. Based on these four factors, the female consumers were grouped as three clusters: the consuming-individuality type, rational-pursuit type, and conservative-stability type. The eating-out behavior of each cluster was significantly different in terms of frequency of eating-out, eating-out expenditures, restaurant selection criteria, food preferences, and the purpose for eating-out. Since this study surveyed females from ages 20 to 59, age and demographics were the differential factors in determining the various lifestyle types. Thus, to target the consumers who form a target market, the food industry should consider market segmentation that combines demographic factors such as age, income, and marital status.

• 한국식생활문화학회지
• /
• 제21권2호
• /
• pp.131-141
• /
• 2006

The purpose of this research is to develop the management strategy for a take-out specialty sore on the basis of SWOT analysis which requires analysis of internal and external environmental informations. The survey was performed in order to gather the internal and external customer informations for a take-out specialty store. The questionnaires developed were distributed to customers (N=188) and employees (N=23) at 5 take-out specialty store branches from April 25, 2002 to April 29, 2002. The statistical data analysis was completed by SPSS WIN 10.0 for descriptive analysis, factor nalaysis, and Pearson's correlation. IPA(Importance-Performance Analysis) was applied in order to identify the critical management issues which would be explained with the organization's weakness or strength. SWOT analysis was performed through identifying the organizational strength and weakness as internal environment factors and external environmental opportunity and threat as uncontrollable external factors.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.137-147
• /
• 2014

The present paper deals with the first ply failure analysis of the laminated composite plates under various static and dynamic loading conditions. Static analysis has been carried out under patch load and triangular load. The dynamic failure analysis has been carried out under triangular pulse load. The formulation has been carried out using the finite element method and a computer code has been developed. The first order shear deformation theory has been applied in the present formulation. The displacement time history analysis of laminated composite plate has been carried out and the results are compared with those published in literature to validate the formulation. The first ply failure load for laminated composite plates with various lamination schemes under static and dynamic loading conditions has been calculated using various failure criteria. The failure index-time history analysis has also been carried out and presented in this paper.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.186-188
• /
• 2003

Rail Route Alignment in hilly terrain is a difficult task to implement as several natural constraints poses threat to the safety and stability of the alignment. The conventional methods followed to find out the final location survey or the feasibility analysis for alignment is time taking consuming. Some times, due to inaccessibility of the terrain it becomes impossible to carry out such works. The construction works in hilly terrain, which are associated with the proposed alignment, are not same as carried out in plane areas due to a vast contrast between the two areas. Different geological structures such as faults, thrusts, synclines and anticlines are a big problem to carry out normal construction practices. Thus for a safe and stable railway route in the unstable hilly areas, it is required to carry out the feasibility analysis of the proposed alignment to assist the policy makers for a successful implementation of the alignment. In the present work Remote Sensing and GIS has been successfully used to carry out geological feasibility and slope stability analysis for rail route alignment work.

• Journal of Periodontal and Implant Science
• /
• 제26권3호
• /
• pp.689-699
• /
• 1996

The purpose of this research is to determine elements affecting the out-of-pocket cost of woman. The sample consisted of 1907 women living Iksan city. The survey was conducted by means of questionnaires. The model used in the analysis of out-of-pocket cost was the Andersen-Newman model, while the analysis techniques used were stepwise multiple regression and path analysis. The number of independent variables used in the analysis was 28 in total, ie 19 predisposing components, 6 enabling components, and 3 need components. In this study, the amount of variance by the model was 17 percent. Number of restricted activity days caused by oral disease, perceived susceptibility of dental disease, having a regular dental care, dental treatment costs, education level and income were found to have significant major effects on out-of-pocket cost. Number of restricted activity days caused by oral disease was the most important variable affecting out-of-pocket cost of woman. Also out-of-pocket cost shows larger effect due to enabling components than frequency of dental utilization.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.127-140
• /
• 1999

In this paper, a microscopic analysis of prefinitelv strained cement paste specimen was carried out. The microscopic behavior of concrete under triaxial stress must be fully understood in order to explain the additional ductilitv that comes from lateral confinement and to get microstructural information in large deformed and large strained concrete. The so-called "tube-squash" test was applied to achieve enormously high shear and deviatoric strain of concrete under extremly high pressure without fracture. Then, microscopic analyses by focusing on hydration and microstructure of Prefinitely strained cement paste were carried out on cored-out deformed and virgin (undeformed) cement paste specimens : the first specimen being 40 days old, the second one being one year old. The microscopic analysis bv Field Emission Scanning Electronic Microscope (FESEM) was carried out for comparison between the specimens after 40 days and those arter one year. For one year old specimens, X-Ray Diffractometer (XRD) analysis, Energy Dispersive x-rav Spectrometer (EDS) analysis, and Differential Thermal Analysis/Thermo-Gravitv (DTA/TG) analysis were also carried out to study the hydration and the microstructures of prefinitely strained cement paste specimen by focusing on the methodologies of their microscopic analyses. analyses.

• 한국식품조리과학회지
• /
• 제18권1호
• /
• pp.109-118
• /
• 2002

The purpose of this study was to identify the behavioral, attitudinal, and demographic correlates of light, medium, and heavy users of eating out at family restaurants. Among 358 reponses from the subjects, 224 responses were utilized for the analysis, and 134 responses were reserved for validating the discriminant function. Descriptive statistics, reliability analysis, stepwise discriminant analysis, canonical discriminant analysis, and anova analysis were used for this study. The findings from this study were as follows: First, He behavioral characteristics were found to discriminate among the three usage groups. Second, it was found that heavy users expressed greater difference between perception and expectation on the quantity of food that are appropriately served and the consistent quality of food at every visit. Third, the usage rate of eating out was not dependent on the sex, but dependent on the companion, average expenditure, and the time of eating out in chi-square test. Finally, the results of the study provide some insight into the pattern of marketing strategies that can be successfully used by the managers of family restaurants.

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.19-26
• /
• 2003

This paper presents the structural analysis of RIROB(Reactor Inspection Robot). Actually, several analyses such as kinetodynamics analysis, fluid mechanics analysis and structural mechanics analysis etc. should be carried out in the design of RIROB. These analyses are executed through the use of com-puter aided engineering(CAE) systems. The kinetodynamics analysis is carried out using a simple fluid dynamic analysis model for the water flow over the sensor support surface instead of difficult fluid mechanics analysis. Simultaneously the structural mechanics analysis is carried out to obtain the mini-mum thickness of the RIROB housing. The minimum thickness of the RIROB housing is evaluated to be 1.0 ㎝ for the safe design of RIROB. The kinetodynamics analysis of RIROB is performed using ADAMS and the static structural mechanics analysis of RIROB is performed using NISA.