• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• ETRI Journal
• /
• v.14 no.4
• /
• pp.165-178
• /
• 1992

본 고는 Mini-MAP 네트워크의 접속장치를 구현한 내용이다. 이 접속장치는 공장자동화 네트워크 시스팀에서 Mini-MAP 노드로 동작하며, PLC, CNC, robot와 같은 프로그래머블 디바이스를 MAP 네트워크 환경에 접속하여 원격제어가 가능하도록 하는 네트워크 구축을 위한 핵심 장치이다. 이 접속장치는 MAP 3.0의 Mini-MAP으로 구현하고 실현하였다. MAC 부계층은 Token Bus Controller(TBC)가 담당하며, LLC 부계층은 class 3로 설계하였고, MMS는 implementaton class MAP3를 설계하였다. 구현된 모든 소프트웨어는 Mini-MAP의 실시간 정보 전송 성능을 보증하기 위해 real-time 멀티 태스크 OS로 운영하도록 설계하였으며, 보드에 firmware로 탑재하였다. 프로토콜 분석기를 이용하여 LLC 수준의 오류검출과 전송기능을 확인하였으며, MMS는 적합성 시험을 이미 받은 MMS를 탑재한 상용 제품과의 통신 실험을 통해 적합성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.193-194
• /
• 2008

IEC 61850 기반의 변전소자동화시스템이 세계적으로 많은 관심을 가지면서 IEC 61850 프로토콜 기반의 IED(Intelligent Electronic Device) 개발을 위해 전 세계적으로 많은 노력이 진행되고 있다. 본 연구에서는 IEC 61850 표준규격에서 제안하는 객체 모델링 및 통신프로토콜을 이용하여 2권선 변압기 보호용 IED를 개발하고 그 구현방법을 설명하였다. 구현을 위해 리눅스 OS(Operation System)가 포팅된 통신보드에 MMS(Manufacturing Message Specification), GOOSE(Generic object oriented substation event) 통신모듈을 탑재하였고 데모 시스템을 구성하여 성능을 검증하였다.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2006.09a
• /
• pp.45.1-45.1
• /
• 2006

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1473-1479
• /
• 2009

Recently, the high speed train was operated and then the train system's reliability requirements are growing more and more. The exact prediction simulation is necessary in the design of power feeding system by the increase of railway electrification. In order to develope the AC feeding system analysis technology, real-time power simulator was manufactured. It is composed to eight channels analog input, forty channels analog output and forty-eight channels digital I/O. The size of simulator rack is 19" and the two I/O boards are installed the PXI chassis built into the real time os. The signal I/O is possible through BNC connector. The test results of manufactured simulator are obtained that the error range of analog I/O signal is below 1 % and simulation condition is set to 1 ms and the simulation output of the analog output compares the results of the simulator.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.561-573
• /
• 2019

This study proposes a new approach to implement smart factory based on robot monitoring system for a small and medium sized enterprise. The simulator includes the forward kinematics and inverse kinematics analyzes of articulated robots. We also modeled the dynamics of the robot and made it possible to simulate it in the program. We studied the interface between the user and the monitoring programming system using the GUI environment of Windows OS, and it is configured to select the appropriate trajectory planning and control method. The reliability of simulator is illustrated by simulation test.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.703-705
• /
• 2011

내부 네트워크의 IP관리를 위해 많은 네트워크 관리 방안 및 솔루션들이 기 구축되어 운영 중이고, 이를 위해 내부 네트워크에 연결된 모든 단말에 특정 Agent를 설치하여 IP를 관리하고 있어 단말(PC, IPT전화기 등)의 OS에 따른 기종별 Agent의 호환문제 및 단말에 기 설치 운영중인 응용프로그램과의 충돌문제가 발생한다. 본 연구에서는 이러한 네트워크 IP관리를 위해 Agent가 필요 없는 네트워크 관리 방식을 제안한다. 네트워크 Switch장비 Firmware의 포트차단 설정을 이용한 기법으로 Agent의 설치없이 Switch장비의 Firmware를 이용하여 네트워크의 접근제어가 가능함을 제안한다. 이를 위하여 인가되지 않은 IP를 Switch장비의 Firmware로 차단하여 네트워크의 접근제어가 가능함을 증명하였다.

• Genomics & Informatics
• /
• v.14 no.4
• /
• pp.205-210
• /
• 2016

Interleukin-10 (IL10) plays an important role in initiating and maintaining an appropriate immune response to non-Hodgkin lymphoma (NHL). Previous studies have revealed that the transcription of IL10 mRNA and its protein expression may be infl uenced by several single-nucleotide polymorphisms in the promoter and intron regions, including rs1800896, rs1800871, and rs1800872. However, the impact of polymorphisms of the IL10 gene on NHL prognosis has not been fully elucidated. Here, we investigated the association between IL10 polymorphisms and NHL prognosis. This study involved 112 NHL patients treated at the National Cancer Center, Korea. The median age was 57 years, and 70 patients (62.5%) were men. Clinical characteristics, including age, performance status, stage, and extra-nodal involvement, as well as cell lineage and International Prognostic Index (IPI), were evaluated. A total of four polymorphisms in IL10 with heterozygous alleles were analyzed for hazard ratios of overall survival (OS) and progression-free survival (PFS) using Cox proportional hazards regression analysis. Diffuse large B-cell lymphoma was the most common histologic type (n = 83), followed by T-cell lymphoma (n = 18), mantle cell lymphoma (n = 6), and others (n = 5). Cell lineage, IPI, and extra-nodal involvement were predictors of prognosis. In the additive genetic model results for each IL10 polymorphism, the rs1800871 and rs1800872 polymorphisms represented a marginal association with OS (p = 0.09 and p = 0.06) and PFS (p = 0.05 and p = 0.08) in B-cell lymphoma patients treated with rituximab plus cyclophosphamide, doxorubicin, vincristine, and prednisone (R-CHOP). These findings suggest that IL10 polymorphisms might be prognostic indicators for patients with B-cell NHL treated with R-CHOP.

• Tuberculosis and Respiratory Diseases
• /
• v.79 no.4
• /
• pp.274-281
• /
• 2016

Background: Factors associated with the prognosis of patients with small cell lung cancer (SCLC) is relatively unknown, than of those with non-small cell lung cancer. This study was undertaken to identify the prognostic factors of SCLC. Methods: The medical records of 333 patients diagnosed with SCLC at tertiary hospital from January 1, 2008, to December 31, 2012 were retrospectively reviewed. Patients were categorized by age (${\leq}65$ years vs. >65 years) and by extent of disease (limited disease [LD] vs extensive disease [ED]). Overall survival and progression free survival rates were determined. Factors associated with prognosis were calculated using Cox's proportional hazard regression model. Results: Most baseline characteristics were similar in the LD and ED groups. Eastern Cooperative Oncology Group (ECOG) performance status (PS), first chemotherapy regimen, and prophylactic cranial irradiation (PCI) differed significantly in patients with LD and ED. Mean ECOG PS was significantly lower (p<0.001), first-line chemotherapy with etoposide-cisplatin was more frequent than with etoposide-carboplatin (p<0.001), and PCI was performed more frequently (p=0.019) in LD-SCLC than in ED-SCLC. Prognosis in the LD group was better in younger (${\leq}65$ years) than in older (>65 years) patients, but prognosis in the ED group was unrelated to age. Conclusion: This study showed that overall survival (OS) was significantly improved in younger than in older patients with LD-SCLC. Univariate and multivariate analyses showed that age, PCI and the sum of cycles were significant predictors of OS in patients with LD-SCLC. However, prognosis in the ED group was unrelated to age.

• Journal of Digital Convergence
• /
• v.13 no.3
• /
• pp.193-199
• /
• 2015

PUSH technology is a technology that can transfer server information without user's request and it is very useful in various areas along with mobile applications. This paper suggest a suitable application model that can utilizes the PUSH technology and mobile devices by finding a useful area. For this, AdMan, a mobile application which can utilize the PUSH technology and mobile devices has been developed. AdMan is a mobile application that developed once and can be able to run on both Android and iOS based mobile devices, since it was developed by using a tool called m-Bizmaker. AdMan is a customer management and advertisement system that can bring big efficiency by utilizing the PUSH technology and mobile application under the today's mobile environment, and it is a good model of ICT technology application of modern society. As an application that can maximize the utilization of the PUSH technology and mobile devices, AdMan can realize better effectiveness if it run on a PUSH server.