• Journal of Periodontal and Implant Science
• /
• 제50권3호
• /
• pp.146-158
• /
• 2020

Purpose: The aim of this study was to investigate and identify the main causes of periodontal tissue change associated with labial gingival recession by examining the anterior region of patients who underwent orthodontic treatment. Methods: In total, 45 patients who had undergone orthodontic treatment from January 2010 to December 2015 were included. Before and after the orthodontic treatment, sectioned images from 3-dimensional digital model scanning and cone-beam computed tomography images in the same region were superimposed to measure periodontal parameters. The initial labial gingival thickness (IGT) and the initial labial alveolar bone thickness (IBT) were measured at 4 mm below the cementoenamel junction (CEJ), and the change of the labial gingival margin was defined as the change of the distance from the CEJ to the gingival margin. Additionally, the jaw, tooth position, tooth inclination, tooth rotation, and history of orthognathic surgery were investigated to determine the various factors that could have affected anterior periodontal tissue changes. Results: The mean IGT and IBT were 0.77±0.29 mm and 0.77±0.32 mm, respectively. The mean gingival recession was 0.14±0.57 mm. Tooth inclination had a significant association with gingival recession, and as tooth inclination increased labially, gingival recession increased by approximately 0.2 mm per 1°. Conclusions: In conclusion, the IGT, IBT, tooth position, tooth rotation, and history of orthognathic surgery did not affect labial gingival recession. However, tooth inclination showed a significant association with labial gingival recession of the anterior teeth after orthodontic treatment.

• 대한치과교정학회지
• /
• 제48권1호
• /
• pp.30-38
• /
• 2018

Objective: The purpose of this study was to investigate factors influencing the success rate of orthodontic microimplants (OMIs) using panoramic radiographs (PRs). Methods: We examined 160 OMIs inserted bilaterally in the maxillary buccal alveolar bone between the second premolars and first molars of 80 patients (51 women, 29 men; mean age, $18.0{\pm}6.1years$) undergoing treatment for malocclusion. The angulation and position of OMIs, as well as other parameters, were measured on PRs. The correlation between each measurement and the OMI success rate was then evaluated. Results: The overall success rate was 85.0% (136/160). Age was found to be a significant predictor of implant success (p < 0.05), while sex, side of placement, extraction, and position of the OMI tip were not significant predictors (p > 0.05). The highest success rate was observed for OMIs with tips positioned on the interradicular midline (IRML; central position). Univariate analyses revealed that the OMI success rate significantly increased with an increase in the OMI length and placement height of OMI (p = 0.001). However, in simultaneous analyses, only length remained significant (p = 0.027). Root proximity, distance between the OMI tip and IRML, interradicular distance, alveolar crest width, distance between the OMI head and IRML, and placement angle were not factors for success. Correlations between the placement angle and all other measurements except root proximity were statistically significant (p < 0.05). Conclusions: Our findings suggest that OMIs positioned more apically with a lesser angulation, as observed on PRs, exhibit high success rates.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권4호
• /
• pp.233-240
• /
• 2020

Background: Palatal injection of local anesthetics is the most painful injection. To obviate the need for palatal injections, local anesthetic agents with diffusibility are being investigated. Hence the present study was designed to analyze the anesthetic efficacy of 2% lidocaine hydrochloride (HCl) with 1:100,000 adrenaline and 4% articaine hydrochloride (HCl) with 1:100,000 adrenaline using single buccal infiltration for the extraction of maxillary premolars. Methods: A prospective, double-blind, crossover, randomized clinical study was performed on 60 consecutive systemically healthy patients with an age range of 15-30 years, requiring extraction of asymptomatic bilateral maxillary premolars for orthodontic purposes. They received 1ml buccal infiltration of 4% articaine HCl with 1:100,000 adrenaline on one side and 2% lidocaine HCl with 1:100,000 adrenaline on the other side. The extraction procedure on either side was scheduled 14 days apart. Parameters assessed were the time of onset of anesthesia, intraoperative discomfort, hemodynamic parameters, and the duration of analgesia. Analysis of the data was done using the Mann-Whitney test, the Wilcoxon test, the Kruskal-Wallis ANOVA test, and the chi-square test. Statistical significance was established at P < 0.05. Results: Articaine showed a faster time of onset and longer duration of analgesia than lidocaine. However, the difference in the intraoperative discomfort and hemodynamic parameters was statistically insignificant. Conclusion: Within the limitations of the study, it can be concluded that the extraction of maxillary premolars can be performed with a single buccal infiltration of 2% lidocaine HCl with 1:100,000 adrenaline, which is one of the most commonly used local anesthetic agent.

• 대한치과교정학회지
• /
• 제41권1호
• /
• pp.25-35
• /
• 2011

교정용 마이크로 임플란트는 나사산을 매개수단으로 한 인접골 압박으로 골내 고정력을 얻는다. 그러므로 충분한 고정력을 얻기 위해서는 나사산이 크면 유리하다. 그러나 몸체에서 차지하는 나사산의 부피비율이 과도하면 이는 코어(core) 직경을 감소시켜 파절위험성을 증대시킬 뿐 아니라, 식립 시 나사산이 골을 지나치게 압박, 인접골에 골개형 장애를 일으켜 임플란트를 이완시키는 원인이 될 수도 있다. 따라서 마이크로 임플란트의 안정성은 그 나사산 디자인이 치밀골 특성과 조화를 이루어야 한다. 본 연구에서는 $Absoanchor^{(R)}$ SH1312-7 (Dentos Inc., Daegu, Korea) 모델을 비교모델로 선택, 몸체와 나사산 사이즈의 조화를 이루기 위한 최적화 해석을 실행하였다. 나사산의 높이(h)와 피치(p)를 디자인 변수로 하여 임플란트 안정성 증대, 식립 시 골 과부하 감소, 파절강도 증대를 목표로 목적함수 SQ(Stability Quotient)를 설정, 해석함으로써 4가지의 다른 h, p 조합을 갖는 나사산을 디자인하였다. 4종의 실험모델과 비교모델에 대해 3D 유한요소법을 이용한 임플란트 식립모사 해석으로, 식립 시 예상되는 골 과부하 영역을 비교하였으며(self tapping과 self drilling의 두 식립 방식에 대해), 또한 실험모델의 실물(prototype)을 가공, 토오크 파절 시험을 실시하였다. 평가결과, 실험모델은 비교모델에 비해 식립 시 인접골 과부하 영역을 덜 발생시켰으며, 파절강도는 더 높게 관찰되었으며, 이로써 나사산 디자인 최적화에 사용된 SQ의 타당성을 확인할 수 있었다.

• 대한치과교정학회지
• /
• 제47권4호
• /
• pp.229-237
• /
• 2017

Objective: The aim of this study was to compare the initial stability as insertion and removal torque and the clinical applicability of novel orthodontic zirconia micro-implants made using a powder injection molding (PIM) technique with those parameters in conventional titanium micro-implants. Methods: Sixty zirconia and 60 titanium micro-implants of similar design (diameter, 1.6 mm; length, 8.0 mm) were inserted perpendicularly in solid polyurethane foam with varying densities of 20 pounds per cubic foot (pcf), 30 pcf, and 40 pcf. Primary stability was measured as maximum insertion torque (MIT) and maximum removal torque (MRT). To investigate clinical applicability, compressive and tensile forces were recorded at 0.01, 0.02, and 0.03 mm displacement of the implants at angles of $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, and $40^{\circ}$. The biocompatibility of zirconia micro-implants was assessed via an experimental animal study. Results: There were no statistically significant differences between zirconia micro-implants and titanium alloy implants with regard to MIT, MRT, or the amount of movement in the angulated lateral displacement test. As angulation increased, the mean compressive and tensile forces required to displace both types of micro-implants increased substantially at all distances. The average bone-to-implant contact ratio of prototype zirconia micro-implants was $56.88{\pm}6.72%$. Conclusions: Zirconia micro-implants showed initial stability and clinical applicability for diverse orthodontic treatments comparable to that of titanium micro-implants under compressive and tensile forces.

• 대한치과교정학회지
• /
• 제46권3호
• /
• pp.171-179
• /
• 2016

Objective: The primary aim of the study was to generate new prediction equations for the estimation of maxillary and mandibular canine and premolar widths based on mandibular incisors and first permanent molar widths. Methods: A total of 2,340 calculations (768 based on the sum of mandibular incisor and first permanent molar widths, and 1,572 based on the maxillary and mandibular canine and premolar widths) were performed, and a digital stereomicroscope was used to derive the the digital models and measurements. Mesiodistal widths of maxillary and mandibular teeth were measured via scanned digital models. Results: There was a strong positive correlation between the estimation of maxillary (r = 0.85994, $r^2=0.7395$) and mandibular (r = 0.8708, $r^2=0.7582$) canine and premolar widths. The intraclass correlation coefficients were statistically significant, and the coefficients were in the strong correlation range, with an average of 0.9. Linear regression analysis was used to establish prediction equations. Prediction equations were developed to estimate maxillary arches based on $Y=15.746+0.602{\times}sum$ of mandibular incisors and mandibular first permanent molar widths (sum of mandibular incisors [SMI] + molars), $Y=18.224+0.540{\times}(SMI+molars)$, and $Y=16.186+0.586{\times}(SMI+molars)$ for both genders, and to estimate mandibular arches the parameters used were $Y=16.391+0.564{\times}(SMI+molars)$, $Y=14.444+0.609{\times}(SMI+molars)$, and $Y=19.915+0.481{\times}(SMI+molars)$. Conclusions: These formulas will be helpful for orthodontic diagnosis and clinical treatment planning during the mixed dentition stage.

• 대한치과교정학회지
• /
• 제53권3호
• /
• pp.194-204
• /
• 2023

Objective: To investigate sex-specific correlations between the dimensions of permanent canines and the anterior Bolton ratio and to construct a statistical model capable of identifying the sex of an unknown subject. Methods: Odontometric data were collected from 121 plaster study models derived from Caucasian orthodontic patients aged 12-17 years at the pretreatment stage by measuring the dimensions of the permanent canines and Bolton's anterior ratio. Sixteen variables were collected for each subject: 12 dimensions of the permanent canines, sex, age, anterior Bolton ratio, and Angle's classification. Data were analyzed using inferential statistics, principal component analysis, and artificial neural network modeling. Results: Sex-specific differences were identified in all odontometric variables, and an artificial neural network model was prepared that used odontometric variables for predicting the sex of the participants with an accuracy of > 80%. This model can be applied for forensic purposes, and its accuracy can be further improved by adding data collected from new subjects or adding new variables for existing subjects. The improvement in the accuracy of the model was demonstrated by an increase in the percentage of accurate predictions from 72.0-78.1% to 77.8-85.7% after the anterior Bolton ratio and age were added. Conclusions: The described artificial neural network model combines forensic dentistry and orthodontics to improve subject recognition by expanding the initial space of odontometric variables and adding orthodontic parameters.

• 대한치과교정학회지
• /
• 제53권3호
• /
• pp.139-149
• /
• 2023

Objective: To assess the color stability and translucency of full cubic stabilized zirconia (FSZ) following orthodontic bonding with different surface treatments and coffee thermocycling (CTC). Methods: This in vitro study was conducted on 120 disc-shaped specimens of FSZ. Thirty specimens were selected as the control group and remained intact. The remaining specimens were randomly divided into three groups based on the type of surface treatment (n = 30): airborne particle abrasion (APA), silica-coating (CoJet), and carbon dioxide (CO₂) laser. After metal bracket bonding in the test groups, debonding and polishing were performed. Subsequently, all specimens underwent CTC (10,000 cycles). Color parameters, color difference (ΔE₀₀), and translucency parameter (TP) were measured three times at baseline (t0), after debonding and polishing (t1), and after CTC (t2). Data were statistically analyzed (α = 0.05). Results: Significant difference existed among the groups regarding ΔE₀₀t0t2 (p < 0.001). The APA group showed minimum (ΔE₀₀ = 1.15 ± 0.53) and the control group showed maximum (ΔE₀₀ = 0.19 ± 0.02) color stability, with no significant difference between the laser and CoJet groups (p = 0.511). The four groups were significantly different regarding ΔTPt0t2 (p < 0.001). Maximal increases in TP were noted in the CoJet (1.00 ± 0.18) and APA (1.04 ± 0.38) groups while minimal increase was recorded in the control group (0.1 ± 0.02). Conclusions: Orthodontic treatment makes zirconia restorations susceptible to discoloration and increased translucency. Nonetheless, the recorded ΔE₀₀ and ΔTP did not exceed the acceptability threshold.

• 대한치과교정학회지
• /
• 제46권2호
• /
• pp.81-86
• /
• 2016

Objective: The aims of this study were to assess the direction and degree of lip-line cant in Korean adult orthodontic patients and to identify the effects of sex and age on changes in the cant severity. Methods: In this cross-sectional retrospective study, lip-line cant was measured in the frontal photographs of 585 Korean patients (92 men and 493 women) aged 18-48 years. The outcome variables (direction and degree of lip-line cant) were assessed in terms of predictor variables (sex, age, sagittal skeletal relationship, and menton deviation angle). Results: The direction of lip-line cant did not differ according to sex, age, or skeletal classification. Patients had $1.6^{\circ}$ of lip-line cant on average before orthodontic treatment. Middle-aged adults displayed a significant trend toward a lower degree of lip-line cant compared to younger adults (p < 0.01). Multiple linear regression analysis showed that the degree of lip-line cant was weakly negatively correlated with age (p < 0.001). Conclusions: While the direction of lip-line cant did not differ according to the parameters explored here, the degree of cant was correlated with age in adults, independent of menton deviation. Specifically, middle-aged adults tended to display significantly lower degrees of lip-line cant than did younger adults.

• 대한치과교정학회지
• /
• 제42권3호
• /
• pp.118-128
• /
• 2012

Objective: The aim of this study was to investigate and compare the in vivo effects of prostaglandin E2 (PGE2) administered by different methods on orthodontic tooth movement and bone metabolism macroscopically, histopatologically, and biochemically. Methods: Forty-five young adult New Zealand rabbits were randomly divided into 3 experimental groups (n = 10/group), 1 positive control group (n = 10), and 1 negative control group (n = 5). The experimental rabbits were fitted with springs exerting 20-g reciprocal force on the maxillary incisors and PGE2 (10 ${\mu}g/mL$) was administered by the intravenous, submucosal, or intra ligamentous route aft er appliance insertion and on days 1, 3, 7, and 14 thereafter. All rabbits were sacrificed on day 21 and their premaxillae were resected for histologic evaluation. Results: Tooth movement was observed in the experimental and positive control groups, but the intraligamentous PGE2 group had the highest values of all analyzed parameters, including serum calcium and phosphorus levels and osteoclastic and osteoblastic populations (p < 0.001). Conclusions: Sub mucosal and intraligamentous PGE2 administration significantly increases orthodontic tooth movement and bone metabolism, but the intraligamentous route seems to be more effective.