• 보존과학연구
• /
• 통권30호
• /
• pp.63-77
• /
• 2009

Scientific studies of conservation techniques and materials in Korea have experienced fast development since international practice and academic knowledge have been introduced to Korea from Japan, France, Germany, and etc from the late 1960s. In recent years, it has been observed that the academic standard of research and the level knowledge of the field in Korea at present are far advanced to compete with many countries. However, many Korean cases still have displayed that the standard and the quality of conservation practice need to be improved. This research examined several cases of derelict restoration of metal relics executed by non-conservators and the effects of their ignorant use of irreversible materials on the valuable objects. The purpose of the study is to display the problem of such treatments and to suggest a need of framework to prevent the loss of original form from them. Metal Buddha statue (Cosmic Buddha) in Borim Temple (National Treasure No. 117), which was conserved by an unexperienced non-conservator, has suffered from a serious problem of corrosion because of the use of destructive material, iron chloride. Another case for metal Buddha statue in Dopian Temple (National Treasure No. 63) displays a representative example of using irreversible materials, Cashew and such ignorant application made a later conservation treatment so difficult in removing the material from the surface of the statue. In conclusion, the research argued that the understanding of materials used in the objects, and the value of relics is important, and pre-experiments before applying conservation materials to a valuable heritage are essential in the conservation treatment.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.204-209
• /
• 2006

최근 건설업의 불황에도 불구하고 고유가에 힘입어 해외 플랜트 시장 특히, 중동의 플랜트 시장은 크게 호황을 이루고 있다. 이는 고유가를 바탕으로 한 중동의 여러 국가에서 대규모프로젝트를 계속적으로 발주를 하고 있어 국내 건설사들은 이러한 플랜트 수주를 통하여 건설 불황을 타개하려 하고 있다. 현재에는 플랜트 시장이 전반적으로 호황을 이루기에 국내 건설사들이 해외 수주를 하는데 있어 큰 어려움을 겪지는 않고 있으나, 고부가가치이며 수익성이 높고 고도의 기술력이 요구되는 원천기술은 선진 엔지니어링 회사에서 과점 형태로 시장을 점유하고 있어 우리와 같은 후발 주자들은 단시간 내에 그 대열에 합류하기란 큰 어려움이 예상된다. 따라서 본 연구에서는 국내 기업의 경쟁력을 강화시키기 위한 방안으로써 플랜트 공사 구매조달 시 담당자의 지식 및 업무능력 범위 내에서 업무가 수행되는 것을 시스템화하여 모든 구매조달 관련자가 선진 수준에서 업무를 수행할 수 있도록 하는 구매조달 시스템과 이에 연계해서 자원 운영을 최적화 효과를 얻을 수 있도록 현장 내 자재 관리 시스템을 구축을 제시하려 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.50-53
• /
• 2003

CMP (chemical mechanical polishing) process remained to solve several problems in deep sub-micron integrated circuit manufacturing process. especially consumables (polishing pad, backing film, slurry, pad conditioner), one of the most important components in the CMP system is the slurry. Among the composition of slurries (buffer solution, bulk solution, abrasive particle, oxidizer, inhibitor, suspension, antifoaming agent, dispersion agent), the abrasive particles are important in determining polish rate and planarization ability of a CMP process. However, the cost of abrasives is still very high. So, in order to reduce the high COO (cost of ownership) and COC (cost of consumables) in this paper, we have collected the silica abrasive powders by filtering after subsequent CMP process for the purpose of abrasive particle recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size and hardness. Also, we annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slurry. As our experimental results, we obtained the comparable removal rate and good planarity with commercial products. Consequently, we can expect the saving of high cost slurry.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.27-33
• /
• 2018

Korea's automobile industry, which has grown rapidly to become the world's fifth-largest automobile producer, To cope with environmental pollution and energy problems in order to prevail competitive edge in global market We are investing a lot of research personnel and costs. Among them, for realizing alternative light weight It is a part of the automobile module system that has achieved the technological development before the breakthrough in the injection molding process in the press process. Door module PNL was the subject of research. The door module PNL is expected to cause warpage before the mold production due to the thin and flat product characteristics and fiber orientation characteristic of the material. In this paper, CAE analysis and reverse correction tool Design. CAE analysis to obtain the results of weld line position, bending position and deformation value Through the correction tool, think3, the original product was modified before the mold production to improve the completeness of the parts. In fiber orientation, the position and size of the cooling channel in the mold, the position and size of the gate, Temperature, pressure, time, and work environment. Compared with the result of CAE analysis, the product that was reverse-corrected by Think3 was manufactured, and injection molding was performed. Injection molding products were tested 24 hours later. 3.5 mm to 7.0 mm, and under the fixed condition, the deviation was from 1.1 mm to 1.5 mm. Unlike the CAE analysis, the deviation of the actual injection pressure and the cooling temperature, the fiber orientation of the material, In order to solve this problem, it is necessary to compare the injection conditions with the database, I knew I had to catch the standard.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.132-132
• /
• 2008

Silicon carbide (SiC) is an attractive material for high-power, high-temperature, and high-frequency applications. So far, atomic force microscopy (AFM) has been extensively used to study the surface charges, dielectric constants and electrical potential distribution as well as topography in silicon-based device structures, whereas it has rarely been applied to SiC-based structures. In this work, the surface potential and topography distributions SiC with different doping levels were measured at a nanometer-scale resolution using a scanning kelvin probe force microscopy (SKPM) with a non-contact mode AFM. The measured results were calibrated using a Pt-coated tip and a metal defined electrical contacts of Au onto SiC. It is assumed that the atomically resolved surface potential difference does not originate from the intrinsic work function of the materials but reflects the local electron density on the surface. It was found that the work function of the Au deposited on SiC surface was higher than that of original SiC surface. The dependence of the surface potential on the doping levels in SiC, as well as the variation of surface potential with respect to the schottky barrier height has been investigated. The results confirm the concept of the work function and the barrier heights of metal/SiC structures.

• 한국의류산업학회지
• /
• 제13권3호
• /
• pp.321-331
• /
• 2011

The purpose of this study is to determine how the people's view on afterlife affects their perception about shrouds. As part of analytical research, the survey was carried out to take a look at the basic thoughts that average persons have on afterlife. This paper also performed the survey on what the shroud reminds the subjects of. Specifically, the questionnaire survey was conducted to see what the people think the necessity and appropriate cost of shroud and see if they have any plan to get it provided in detail. Data from this work were statistically processed and empirically analyzed. Findings of this study can be summarized as follows. As to the funeral methods, the subjects in this work preferred cremation to burial. It was found that they recognized shrouds as necessary, but they did not have a thought in a serious manner that the suit for the dead would affect the repose of the dead and guide his or her soul to the heaven. Those respondents did not have any immediate plan to purchase shrouds, either. However, they considered the price of shroud as most important when they might come to choose the garment. With regard to the quality, it turned out that they preferred the domestic shrouds whose material are natural to those from foreign country. Also, they opted for such a kind whose shape is not so different from that of casuals they would usually wear and whose color is same to the main material of the original garment. The common material preferred most by the subjects was a hemp. The subjects' view of afterlife was not greatly related not only to how much they recognized shrouds as necessary but also to their preference for materials and patterns. On top of this, their unique taste for particular types of shroud was found to be significantly dependent on whether their view of afterlife is positive or negative, whether they firmly believe in afterlife, whether they take the absolute predestination and whether they accept the prayer-effect relationship in terms of psychology.

• 폴리머
• /
• 제37권1호
• /
• pp.34-40
• /
• 2013

아민 작용기를 가진 POSS에 toluene diisocyanate(TDI)와 caprolactam(CL)의 반응물을 반응시켜 POSS 기반의 하이브리드 충전제(POSS-(TDI+CL))를 합성하였고 이를 상업용 폴리아미드계 열가소성 탄성체인 PA-TPE에 블렌딩하여 PA-TPE/POSS-(TDI+CL) 복합체를 제조하였다. POSS계 충전제의 화학구조는 FTIR과 $^1H$ NMR을 사용하여 확인하였다. PA-TPE/POSS-(TDI+CL) 복합체는 충전제를 PA-TPE에 7 wt%까지 첨가하여 제조하였고 이들은 순수 PA-TPE와 변성되지 되지 않은 PA-TPE/octaphenyl POSS의 복합체보다 낮은 tension set 값을 보여 탄성회복력이 향상되었다. 또한 하이브리드 충전제의 함량이 증가함에 따라 인장강도와 모듈러스가 증가하였다. 결론적으로 하이브리드 충전제인 POSS-(TDI+CL)는 원래 PA-TPE의 탄성에 나쁜 영향을 미치지 않고도 기계적 물성을 향상시킬 수 있는 적절한 충전제라 볼 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.145-148
• /
• 2003

Recently, the recycle of CMP (chemical mechanical polishing) slurries have been positively considered in order to reduce the high COO (cost of ownership) and COC (cost of consumables) in CMP process. Among the composition of slurries (buffer solution, bulk solution, abrasive particle, oxidizer, inhibitor, suspension, antifoaming agent, dispersion agent), the abrasive particles are one of the most important components. Especially, the abrasive particles of slurry are needed in order to achieve a good removal rate. However, the cost of abrasives, is still very high. In this paper, we have collected the silica abrasive powders by filtering after subsequent CMP process for the purpose of abrasive particle recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size and hardness. Also, we annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slury, As our experimental results, we obtained the comparable removal rate and good planarity with commercial products. Consequently, we can expect the saving of high cost slurry.

• 한국염색가공학회지
• /
• 제25권3호
• /
• pp.172-180
• /
• 2013

Aramid fibers are being used increasingly in a wide range of application due to low density, high specific strength, high modulus, and high thermal resistance. But owing to its special physical and chemical structures, it is sensitive to absorb the ultraviolet light which will degrade the fiber's useful mechanical properties and structure. In this paper, the sol-gel technique was used to improve the photo-stability of p-aramid fibers. $TiO_2$, modified $SiO_2$/$TiO_2$ sol were used as coating solutions. The influence of the such coatings on the photo-stability of p-aramid fiber was investigated by an accelerated photo-ageing method using xenon lamp. The photo-stability of p-aramid fiber showed obvious improvement after the modified silica binding coating. But the amorphous $TiO_2$ sol coatings showed a negative effect. After 144h light exposure, the modified silane binder-coated fibers showed less degradation in mechanical properties with the retained tensile strength greater than about 70% of the original value.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.51-52
• /
• 2007

This paper compared wired Acoustic Emission (AE) signals with wireless AE signals. According to the material and process condition, each process signal has distinguishable characteristic to show each removal phenomenon. Therefore, wired and wireless AE sensors having different bandwidth are complementary for CMP process monitoring. Especially, the AE sensor was used to investigate abrasive and molecular-scale phenomena during CMP process, which was compatible to acquire high level frequency. In experiment, wireless AE system was used to get signals in rotary system, using bluetooth. But, it is possible to acquire only RMS signals, which can not analyze abrasive and molecular-sale phenomena. Second, wired AE system was installed using mercury slip-ring, which is suitable not only for rotation equipment but also for acquiring original signals. The acquired signals were analyzed by FFT for understanding of abrasive and molecular revel phenomena in CMP process, finally, we verified that two types of AE sensor with different bandwidth were complementary for CMP process monitoring.