• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.298-301
• /
• 2015

A new Hibiscus syriacus variety, 'Dasom', was developed by radiation breeding using gamma ray exposure at the Korea Atomic Energy Research Institute (KAERI). Seeds of the original variety, 'Hongsun', were collected in 1993. These seeds were irradiated at 100 Gy dose and $M_1$ seeds were planted in a field of the KAERI in 1994. Lines with preferred flower color that were going to be used for street trees were initially selected in 1998. Analyses of characteristics were conducted from 2005 to 2010. The 5-year-old 'Dasom' plants were approximately 106 cm in height and averaged 19 branches, and thus were suitable for street trees. The flowers of 'Dasom' were semi-double type with medium red color and red eye spots. Petal length and width were about 4.0 cm and 3.3 cm, respectively. Flower diameter was slightly small, at about 5.8 cm, because of highly overlapping petals. The flowering period of 'Dasom' was about 105 days, which was 6 days shorter than that of the original variety, 'Hongsun'. However, the main charactersistics of 'Dasom' including leaf shape were similar to those of the original variety, 'Hongsun'.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.12-20
• /
• 2015

After the great King Munmu constructed Donggung-palace and Wolji-pond in 674, original landscape could not be estimated due to lack of related materials for some 1,250 years until it was surveyed in 1922. Accordingly, the study, to estimate changes of Wolji-pond landscape more accurately, analyzed the study of Hara(1932) and pictures in the Japanese ruling period etc. - these had not been studied so far. The study results are as follows. As a result of comparing survey maps of 1922 and one of 1975, it was found that during 53 years, whole area excluding island showed eroded part by 2~4m, severely, there was mounding area which was lowered by 10m. And it was identified through survey map of 1922 and pictures of the 1950's that inside southern shore protection of the No. 1 construction site were many landscape-stones(景石) which can make imagine a hill; here was water path. Trace of such path etc. remained just before excavation. 2) The construction site No. 3 and 5 in peak shape were higher than construction site No. 1, 2, and 4. Accordingly, there is high possibility that construction stood on high stylobate. So it is wrong that construction site No. 3 and 5 are restored in same height as other construction sites. Comprehensive restoration basic plan made in 2012 was also wrong. As a result of estimating changes of landscape through pictures before excavation of Wolji-pond, the author could identify changes of landscape in mound area and pumice stones which showed much changes in drawing. The study has limit due to lack of space. But if more pictures can be analyzed, it could further help for estimating original landscape of Wolji-pond.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.4
• /
• pp.88-97
• /
• 2017

The purpose of this study was to identify the development and transition of the Original landscape(始景觀) of Oeam Village based on the landscape that changes over time and the relevant factors and the following summarizes the findings: First, Original landscape perceived by the ancestors of Korea was identified in the description of topography and landscape of Oeam Village mentioned in various literature such as "Oeamgi(巍巖記)" and topography was analyzed to identify that the natural waters that flew before Oeam Village was formed aligned with the artificial waterway inside the village. Second, the landscape of Oeam Village was classified by characterized events: (1) expansion of the tribal town of the Yi Family of Yean, (2) stagnancy where the villagers formed an organic relationship without much change to the landscape, (3) the biggest change to the landscape by national policies, and (4) preservation and use of tourism resources based on preservation of cultural heritage. Third, the center of village moved from the east of village to the west of village. In the past, the east of village provided agricultural functions for the development and expansion of village. The center later shifted to the entrance to the west of village under the influence of industrialization and tourism. Further studies would be necessary to clarify the authenticity of resources through additional literature for better understanding of the past of Oeam Village and the transition of the village's landscape elements and the comparison of their characteristics could be possible topics for future studies.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.192-207
• /
• 2018

The Hyangwonjeong and Chwihyanggyo located in the back garden of Gyeongbokgung Palace have mainly been investigated by referring to historical records about the reign of King Gojong and various drawings thought to have been made in the late Joseon period. Because the current Chwihyanggyo was rebuilt temporarily after being burned to the ground during the Korean War, its form and the location of its reconstruction are not grounded on any accurate historical investigation. Although there are some photos of the Chwihyanggyo that were taken between the end of the Joseon period and the Japanese colonial era, there is no information about the photographer or when they were taken, and it is hard to see which photos show the original Chwihyanggyo Bridge with them. The Cultural Heritage Administration, which is currently promoting the restoration of the Chwihyanggyo, has recognized this problem and initiated research on the matter. In 2017, an excavation survey successfully identified the original location of the Chwihyanggyo, as well as that of Hyangwonji Gado (假島), and the shape of the first foundation stone in the pier. With these findings it was possible to infer the ways in which the Chwihyanggyo has changed over the years. Moreover, by measuring the AMS (Accelerator Mass Spectrometer) of the samples collected in the mounding layer of the Gado where the Hyangwonjeong is located, it was discovered that the Hyangwonjeong was constructed sometime after the Imjin waeran (Japanese Invasion of Korea in 1592), which means that the theory that 'the late Joseon Hyangwonjeong was not the former early Josenn Chwirojeong' is groundless. Judging by the materials found to date, we can reasonably assume that the Chwihyanggyo and Hyangwonjeong must have been built around the same time that Geoncheonggung Palace was founded in the late Joseon period.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.10
• /
• pp.41-48
• /
• 2023

The presence of abnormalities in the subgrade of roads poses safety risks to users and results in significant maintenance costs. In this study, we aimed to experimentally evaluate the temperature distributions in abnormal areas of subgrade materials using infrared cameras and analyze the data with machine learning techniques. The experimental site was configured as a cubic shape measuring 50 cm in width, length, and depth, with abnormal areas designated for water and air. Concrete blocks covered the upper part of the site to simulate the pavement layer. Temperature distribution was monitored over 23 h, from 4 PM to 3 PM the following day, resulting in image data and numerical temperature values extracted from the middle of the abnormal area. The temperature difference between the maximum and minimum values measured 34.8℃ for water, 34.2℃ for air, and 28.6℃ for the original subgrade. To classify conditions in the measured images, we employed the image analysis method of a convolutional neural network (CNN), utilizing ResNet-101 and SqueezeNet networks. The classification accuracies of ResNet-101 for water, air, and the original subgrade were 70%, 50%, and 80%, respectively. SqueezeNet achieved classification accuracies of 60% for water, 30% for air, and 70% for the original subgrade. This study highlights the effectiveness of CNN algorithms in analyzing subgrade properties and predicting subsurface conditions.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.333-341
• /
• 2008

In this paper, a new interpolation model for the head related transfer function (HRTF) was proposed. In the method herein, we assume that the impulse response of the HRTF for each azimuth angle is given by linear interpolation of the time-delayed neighboring impulse responses of HRTFs. The time delay of the HRTF for each azimuth angle is given by sum of the sound wave propagation time from the ears to the sound source, which can be estimated by using azimuth angle, the physical shape of the underlying head and the distance between the head and sound source, and the refinement time yielding the minimum mean square error. Moreover, in the proposed model, the interpolation intervals were not fixed but varied, which were determined by minimizing the total number of HRTFs while the synthesized signals have no perceptual difference from the original signals in terms of sound location. To validate the usefulness of the proposed interpolation model, the proposed model was applied to the several HRTFs that were obtained from one dummy-head and three human heads. We used the HRTFs that have 5 degree azimuth angle resolution at 0 degree elevation (horizontal plane). The experimental results showed that using only $30\sim40%$ of the original HRTFs were sufficient for producing the signals that have no audible differences from the original ones in terms of sound location.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.2
• /
• pp.4-19
• /
• 2014

In Joseon dynasty, Gongsin-Gyoseo(Royal Edicts rewarding meritorious vassals) was issued for the reward of the contribution to the specific event of the nation. The family decided as vassals succeeded this Gongsin-Gyoseo as the family treasure to later generations. When one happened to lose this caused by an unavoidable situation such as war in this process, there were a few cases of reissuing of Gongsin-gyoseo by the nation. The confirmative reissued Gongsin-gyoseo among Gongsin-gyoseo that descended down by now are three pieces which is Park dongnyang Hoseong Gongsin-Gyoseo, Gu goeng Jeongsa Gongsin-Gyoseo, and Park jung Jeongsa Gongsin-Gyoseo. This research considered the form and mounting about these three pieces. It was indicated that the reissued Gongsin-Gyoseo was produced following the same form with the original Gongsin-Gyoseo, that is pyeongchul(moving to next lines) and daedu (writing one or two letters ahead compared to the first letter) and so on. But, it was indicated that the change of the position of the vassals in the reissued time was reflected compared to position of the original Gongsin-Gyoseo. In case of Jeonsa Gongsin-Gyoseo, it was indicated that it was 'Wonjongdaewang-whi' since the original Gongsin-Gyoseo was 'Jeongwongun-bu' and the reissued time he became the father of King Injo. Also, it was confirmed that the case of deprivation because of conspiracy such as 'Kim jajeom, Kim ryeon, Sim kiwon, Sim kisung' was produced as the original document and deleted with black ink stick. It was newly confirmed while the original Gongsin-Gyoseo was produced by a designated writer from the nation, the reissuance was written by a writer from the family of the vassals. Since the mounting of Gongsin-Gyoseo could be changed according to the favor and technique of the craftsman participated in the practical production such as Baezeopjang and economical situation of the country supplying the material, the mounting of these three Gongsin-Gyoseo should be different from the original mounting, especially because of the loss of the original by the Manchu war of 1636. The comparison result of Gongsin-Gyoseo produced in the same period with the original issued one in the record of the related Uigwe (a collection of documents from the Joseon Dynasty), the reissued one seems to be larger in the form or ratio of the mounting compared to the first issued one. First of all, the width of Byunah was expanded as twice bigger, center and both side Hoejang also was bigger as over 2cm, and the below Hoejang was expanded as 10cm, and the ratio of the upper Hoejang and the below Hoejang was wider as 1.5 times and the reissuance was 1:1 ratio. The bisect of upper shaft in Park dongnyang Hoseong Gongsin-Gyoseo is assumed as the form of an equilateral triangle, not a half-moon shape of the present, and Gu goeng and Park jung Jeongsa Gongsin-Gyoseo will be the form whose bisection form is same but the size is smaller. Chuksu is confirmed that the size is not changed significantly. Osaekdahoe can be assumed that the width was smaller compared to the first issued one. The 3 pieces of the reissued versions provide the clue of the verification for the form of the mounting of Bosa Gongsin-Gyoseo in the same production period. In the situation that the mounting of the production time was not confirmed among the currently descended Bosa Gongsin-Gyoseo, they can be very important materials.

• Journal of the Korean Society of Food Culture
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2000

This study was to investigate the effects of concentration of malt extract in Sikhye manufacture on saccharification time, shapes of saccharified rice(the cooked rice) and sensory evaluation score of Sikhye. The optimum concentration of malt extract to reduce saccharification time and to keep desirable shapes of saccharified rice was 4 times (rice 24g, malt 28g and D.W. 240ml) as suitable as base composition formula(rice 6g, malt 7g and D.W. 240ml). The shapes of saccharified rice were influenced by the concentration of malt extract, the saccharification time and the shapes of steamed rice before saccharification. A good taste(softness) of Sikhye rice and the desirable shapes of saccharified rice were more suitable in the case of a small amount of unsaccharified starch than in the case of finishing saccharification. The optimum saccharification time to keep the desirable shapes of saccharified rice was 240min and also was desirable between 210 and 270min. To keep a good taste(softness) and the desirable shapes of saccharified rice, and to reduce the manufacturing time, it is desirable to in mass production of Sikhye add 3 times more water after making Sikhye in the ratio of rice 24g, malt 28g and water 240ml. In this case the whole amount will become 4 times as much as the original one.

• Korean Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.147-165
• /
• 1998

The object of this study was to help designing of well-fit and comfortable brassieres for the elementary school girls through the survey on actual condition of wearing brassieres. The subjects of investigation for this study was the elementary school girls in the province of Jeonbuk and Taejeon city. The conclusion of this study was as follows; The 40.2% of the total subjects were wearing brassieres like the 63.3% of the fourth, the 85.4% of the fifth, and the 89.7% of the sixth grade students. The main reason of non wearing brassieres was for the underdeveloped breast, and also that of wearing brassieres was for the good shape of the breast. The main types of brassieres were ranked "Tank Top type", "Mold type", and "Adolescent girl-Bra". They had started to wear brassieres by the recommendation of adults who were their mother or teachers, and usually wearing brassieres all day. They usually purchased brassieres "with mother together" or "only by their mother". The standard of choosing brassieres was also ranked by FASHION, CONVENIENCE, SIZE, TOUCH, and SWEAT ABSORPTION. The total score of satisfaction for wearing brassieres was showed "Average score" and the score higher in Jeonju and Taejeon than in Kunsan. The higher grade and fatter was showed decreasing the score of satisfaction. The higher grade became, the more various for the size and preferable a pure cotton fabric for brassieres. The favorite types of brassieres were "Sport Bra" and "Volume-up Bra". They usually purchased a little larger size than their original size of that.

• Structural Engineering and Mechanics
• /
• v.16 no.5
• /
• pp.519-531
• /
• 2003

Piezoelectric actuators have long been recognised for use in aerospace structures for control of structural shape. This paper looks at active control of the swept shock wave/turbulent boundary layer interaction using smart flap actuators. The actuators are manufactured by bonding piezoelectric material to an inert substrate to control the bleed/suction rate through a plenum chamber. The cavity provides communication of signals across the shock, allowing rapid thickening of the boundary layer approaching the shock, which splits into a series of weaker shocks forming a lambda shock foot, reducing wave drag. Active control allows optimum control of the interaction, as it would be capable of positioning the control region around the original shock position and unimorph tip deflection, hence mass transfer rates. The actuators are modelled using classical composite material mechanics theory, as well as a finite element-modelling program (ANSYS 5.7).