• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.545-551
• /
• 2017

It is very important to effectively obtain the information related to the human body shape for user-centered design. The human body shape is a huge combination of various irregular curves and is typically obtained by a 3-D Scanner. 3-D scanners show high reliability; however, they are expnsive equipment with limited mobility. 3-D models of irregular-shaped curves were created by a photogrammetric approach and the errors between the original curve and the models were evaluated. 3-D models were created based on 160, 80, 40, 20, 10, and 5 marking points evenly located on the original curve. In the case of convex curve, low levels of residuals were observed in the models from 160, 80, 40, and 20 marking points (0.13% max). In the combination of convex and concave curves, relatively low levels of residuals were observed in the models from 160, 80, and 40 marking points (0.29%). It is possible to conclude that marking points should be placed at every 5% of overall length of a convex curve and at every 2.5% of overall length of a curve with convex and concave curve in order to maintain low levels of errors. A photogrammetric approach can be used as an alternative for the 3-D scanners with advantages of low cost and mobility.

• Conservation Science in Museum
• /
• v.27
• /
• pp.1-22
• /
• 2022

A chimi(a roof ridge decoration) excavated from the Busosan Temple Site in Buyeo was restored in 1978 at the Buyeo Museum. The gypsum restoration material had deteriorated over time and part of it was seriously damaged and unable to bear the weight of the chimi. The chimi features traces of emergency treatment revealing that the inside of the body and some portions of the tail were reinforced several times using epoxy resin. A condition survey performed in preparation for its transfer for an exhibition found the lower body and wings of the chimi to be highly vulnerable and it was determined that the chimi needed further restoration. The dismantling of the chimi for restoration revealed several elements that provide clues to the production techniques applied by its makers, so they were subjected to inspection. This study explores the production techniques used in the chimi from the Busosan Temple Site that were revealed during the process of dismantling it for restoration. The chimi was inspected using 3D scanning and its rigid vertical shape was restored to a natural form based on the production techniques identified during the dismantling process. The existing restoration material was replaced to improve durability. 3D printed elements were produced based on 3D modelling and were joined to the original chimi to correct its shape and fill in the missing parts, restoring the chimi to its original appearance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.875-888
• /
• 2013

The researches have recently progressed toward the use of the superelastic shape memory alloys (SMAs) to develop new smart control systems that reduce permanent deformation occurring due to severe earthquake events and that automatically recover original configuration. The superelastic SMA materials are unique metallic alloys that can return to undeformed shape without additional heat treatments only after the removal of applied loads. Once the superelastic SMA materials are thus installed at the place where large deformations are likely to intensively occur, the structural system can make the best use of recentering capabilities. Therefore, this study is intended to propose new buckling-restrained braced frames (BRBFs) with superelastic SMA bracing systems. In order to verify the performance of such bracing systems, 6-story braced frame buildings were designed in accordance with the current design specifications and then nonlinear dynamic analyses were performed at 2D frame model by using seismic hazard ground motions. Based on the analysis results, BRBFs with innovative SMA bracing systems are compared to those with conventional steel bracing systems in terms of peak and residual inter-story drifts. Finally, the analysis results show that new SMA bracing systems are very effective to reduce the residual inter-story drifts.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.153-161
• /
• 2010

Numerous past studies have shown that safety and serviceability of many concrete infrastructures and buildings built in 1970's have far less strength capacities than their original intended design capacities, thereby requiring repair and strengthening. Currently, aged concrete structures are being repaired using various methods developed in the past. Unfortunately, these methods do not consider the specific conditions that these members are under, but they merely attach repairing materials on the external surface for random strength improvements. Therefore, in order to improve repair and strengthening methods by considering composite behavior between repairing material and structural member, enhanced construction methodologies are needed. Also, the enhanced repairing and strengthening methods must be able to be implemented on structural members constructed using high performance concrete to meet the present construction demand of building mammoth structures. Therefore, in this study, a repairing and strengthening method for retrofitting high strength concrete (HSC) columns that can effectively improve column performance is developed. A square HSC column's cross-sectional shape is converted to an octagonal shape by attaching precast members on the surface of the column. Then, the octagonal column surface is surface wrapped using Carbon Fiber Sheets (CFS). The method allows maximum usage of confinement effect from externally jacketing CFS to improve strength and ductility of repaired HSC columns. The research results are discussed in detail.

• (The)Study of the Eastern Classic
• /
• no.43
• /
• pp.259-304
• /
• 2011

It has been difficult to logically and consistently explain about the history of Korean national flag, Taegeukgi, for the past time because the exact shape of Young Hyo Park's Taegeukgi was not known. Any meaningful study of Taegeukgi was no longer possible since the most important core key was lost in the study of Taegeukgi. In this study, I inferred the original copy of Taegeukgi used by Young Hyo Park referring to the aspect of principle of Taegeukgi based on the existing historical data such as the copy of Young Hyo Park's Taegeukgi found in the UK National Archives in 2008, the recordings shown in Shi-wha-ji-lue, the painting of Taegeukgi inserted in Sisashinbo then in Japan, the Taegeukgi painted by Gil Joon Yoo, Denny Taegeukgi, etc. As a result, I have found that Taegeukgi has been handed down in a consistent shape even if China and Japan had tried to disturb and distorted it. That is, the Taegeukgi used by Young Hyo Park was painted following the command of the King Gojong and its shape was already defined before he went to Japan. I have found that such defined shape was the 'COREA Ensign', which was used for the Treaty between Chosun and the United States. I have also found that the 'COREA Ensign' from which Young Hyo Park's Taegeukgi was originated was designed by Gyoung Seok Oh and Gyoung Soo Kim referring to the situations that time. In addition, I have found that Shi-wha-ji-lue giving the base for the existing theory of Taegeukgi designed by Young Hyo Park was partially distorted by Japan.

• Conservation Science in Museum
• /
• v.24
• /
• pp.55-74
• /
• 2020

The Sacred Bell of Great King Seongdeok is required digital precision recording of conservation conditions because of corrosion and partial abrasion of its patterns and inscriptions. Therefore, this study performed digital documentation of the bell using four types of scanning and unmanned aerial vehicle (UAV) photogrammetry technologies, and performed the various shape analyses through image processing. The modeling results of terrestrial laser scanning and UAV photogrammetry were merged and utilized as basic material for monitoring earthquake-induced structural deformation because these techniques can construct mutual spatial relationships between the bell and its tower. Additionally, precision scanning at a resolution four to nine times higher than that of the previous study provided highly valuable information, making it possible to visualize the patterns and inscriptions of the bell. Moreover, they are well-suited as basic data for identifying surface conservation conditions. To actively apply three-dimensional scanning results to the conservation of the original bell, the time and position of any changes in shape need to be established by further scans in the short-term. If no change in shape is detected by short-term monitoring, the monitoring should continue in medium- and long-term intervals.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.306-313
• /
• 2015

In this study, the change of optical characteristics was studied according to the micro optical pattern provided by photo lithography followed by thermal reflow process. The shape and luminance variation with micro pattern was evaluated by SEM and spectrometers. Also, we analyzed the luminance characteristics using the 3D-optical simulation (Optis works) program. As a result, we found that the radius of curvature(R) in micro pattern is decreased up to 77%($150^{\circ}C$) compared to the radius of curvature at the condition $100^{\circ}C$, which is caused by efficient reflow of organic material without chemical changes. The highest enhancement of brightness with optimum micro pattern was obtained at the condition of $120^{\circ}C$ reflow process. The brightness gain with optical micro patterns is more than 15% at the condition of R=16.95 um, ${\Theta}=77.14^{\circ}$ compared to original optical source. The results of light simulation with various radius of curvature and side angle of pattern shows the similar result of experiment evaluation of light behavior on optical micro patterns. It is regarded that the more effect on light enhancement was contributed by side angle which is effective factor on light reflection, rather than the curvature of micro-patterns.

• Journal of the Korean Society of Costume
• /
• v.64 no.2
• /
• pp.17-34
• /
• 2014

This is a theoretical and empirical study on Kasaya, the Buddhist monk's robe, which is one of the traditional Korean costumes that has kept it original form, as well as it being the most symbolic ritual costume in Buddhism. The purpose of the study is to see the different types of Kasaya, and the transitions it has gone through since Mid Joseon Dynasty. The analysis was performed after categorizing Kasaya in the following manner: layers, the way to wear, symbolism in construction, sewing, etc. Having a variety of Ilwolguangcheop(日月光貼) is a feature of Korean Red Kasaya. In the beginning, Its shape was very similar to shape of Hyungbae(胸背), and this was a royal gift and had the same meaning as an official uniform for a Buddhist monk. So designs of the Cheop(貼) could have been transformed from those of Hyungbae with a Buddhist twist. The conclusion of the study is as follows: Double layered Kasaya shows its transition from double layer to single layer. The fastening ornaments have been simplified in all materials from Yeongja(纓子). The latch type and three-paired Yeongja type transformed into hook type and one-paired Yeongja type. Color is the most common feature above all, and it is mainly in red. The form of Korean Kasaya has a significant relation with development of Buddhism. The integration of the Zen sect would have influenced the integration of Kasaya, which shows diversity throughout the period.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.40 no.1
• /
• pp.22-27
• /
• 2020

Silkworm powder was prepared from 3^rd day of 5^th instar silkworm through various drying technology including freeze drying, hot wind drying, infrared drying, and microwave drying. The shape of silkworm dried was different with the drying methods. Freeze drying and microwave drying silkworm looked its original form, but hot wind drying and infrared drying silkworm looked shriveled and crumpled. The color of silkworm powder freeze-dried changed from yellowish green to hazel with lowering freezing temperature. Heavy metals including Pb, Cd, As, and Hg were lower the food criteria. The results of 1-deoxynojirimycin analysis was shown that BaekOkJam and GoldenSilk silkworm powder was satisfied the criteria of functional food, but YeonNokJam silkworm powder was lower than the criteria. The amino acid composition of silkworm was similar regardless of the frozen temperature in freeze drying process.

• Journal of KIISE
• /
• v.44 no.3
• /
• pp.332-337
• /
• 2017

When using IFC data consisting of STEP schema based on the EXPRESS language, it is not easy for collaborating project stakeholders to share BIM modeling shape information. The IFC viewer application must be installed on the desktop PC to review the BIM modeling shape information defined within the IFC, because the IFC viewer application not only parse STEP structure information model but also process the 3D feature construction for a 3D visualization. Therefore, we propose a lightweight data structure design for web visualization by parsing IFC data and constructing 3D modeling data. Our experimental results show the weight reduction of IFC data is about 40% of original file size and the web visualization is able to see the same quality with all web browsers which support WebGL on PCs and smartphones. If applied research is conducted about the web visualization based on IFC data of the last construction phase, it could be utilized in various fields ranging from the facility maintenance to indoor location-based services.