• Smart Structures and Systems
• /
• v.25 no.2
• /
• pp.241-254
• /
• 2020

Using confined shape memory alloy (SMA) bar or plate, this study proposes an innovative self-centering damper. The damper is essentially properly machined SMA core, i.e., bar or plate, that encased in buckling-restrained device. To prove the design concept, cyclic loading tests were carried out. According to the test results, the damper exhibited desired flag-shape hysteretic behaviors upon both tension and compression actions, although asymmetric behavior is noted. Based on the experimental data, the hysteretic parameters that interested by seismic applications, such as the strength, stiffness, equivalent damping ratio and recentering capacity, are quantified. Processed in the Matlab/Simulink environment, a preliminary evaluation of the seismic control effect for this damper was conducted. The proposed damper was placed at the first story of a multi-story frame and then the original and controlled structures were subjected to earthquake excitations. The numerical outcome indicated the damper is effective in controlling seismic deformation demands. Besides, a companion SMA damper which represents a popular type in previous studies is also introduced in the analysis to further reveal the seismic control characteristics of the newly proposed damper. In current case, it was found that although the current SMA damper shows asymmetric tension-compression behavior, it successfully contributes comparable seismic control effect as those having symmetrical cyclic behavior. Additionally, the proposed damper even shows better global performance in controlling acceleration demands. Thus, this paper reduces the concern of using SMA dampers with asymmetric cyclic behavior to a certain degree.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.5
• /
• pp.300-306
• /
• 2018

The rod-shaped $Ni_{0.5}Zn_{0.5}Fe_2O_4$ particles were synthesized via a topotactic reaction, in which goethite (${\alpha}-FeOOH$) particles are the main constituents. The phases, microstructures and magnetic properties of these particles were studied using XRD, FE-SEM and VSM. The precursor solution consisted of $NiSO_4{\cdot}xH_2O$, $ZnSO_4{\cdot}xH_2O$, goethite and D.I. water werereacted at four different temperatures (50, 70, 90, $100^{\circ}C$) to generate four differently precipitated particles respectively. During the co-precipitation reaction, the pH of the solution was maintained at 8.0 using NaOH. The particles co-precipitated and calcined at a temperature of $700^{\circ}C$, exhibited a rod-shape similar to its original goethite, which means that the shape of Ni-Zn ferrite particles can be topotactically controlled by the goethite. The particles synthesized at 70 and $90^{\circ}C$ have a saturation magnetization of 29 and 35 emu/g respectively; representing better values than the ones synthesized at the 50 and $100^{\circ}C$, in which some second phases such as $Fe_2O_3$ were observed.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.5 no.1 s.12
• /
• pp.51-55
• /
• 2007

These days, hair design is recognized as a kind of molding arts which peform expression skill to create personal self as well as practical skill. Recently, the efforts to express hair design sublimating it to art works have continued. For these reasons, this study had purposes as follows; First, it developed creative and original design producing works to shape the flower image that was an important material of hair design. Second, it presented the possibility to express the field of hair design with art. In the flow of age, nature has provided design with unlimited creative motive. Flowers, among various materials, show the nature's change, combination and order and impose diverse symbolic meanings. Therefore, flowers are good materials to express the works. Through the process of decolorizing and dyeing with hair, five works of nature's fragrance, hope, reed flowers, windflower, magnolia blossom had been produced. The results of the process were as follows; First, the transformation of shape through the simple process taking the image of shaping flower as subject matter could be a motive of new hair design art. Second, if the various images of flowers were expressed as hair art with three-dimensional shape, it could be works with value of beauty. Through the process of this study, it was proved that nature could be endless subject matter for art. Therefore, with continuous studies, it can be motive of developing designs in producing work activities of many hair designers. In addition, academic development will be achieved through wide and diverse studies.

• Korean Journal of Oriental Medicine
• /
• v.11 no.2
• /
• pp.141-154
• /
• 2005

The following is a taxonomic list of the specific features of external and internal shape and pattern analysis of Paeonia lactiflora PALL. and P. obovata MAX as the standard of herbal medicine. 1. External shape of original plant P. lactiflora has lancelate and elliptical leaves with no hair on both sides. It bears a flower bud at the shoot apex or leaf axil. On the other hand, P. obovata has obovate leaves with hair on the back side. It has a single flower bud at the shoot apex. 2. Physical characteristics of herbal states P. lactiflora has a bright and smooth external surface whose color is light red brown, light gray on its section and it is not easy to cut. On the other hand, P. obovata has a coarse external surface whose color is dark brown, pinkish on its section and it is easy to cut. 3. Physical characteristics of herbal state in currents Paeonia Radix Alba is brown on the external surface, and whitish on its section. On the other hand, Paeonia Radix Rubra is dark brown on the external surface, and yellowish-white on its section. 4. Internal characteristics Internal shape is correspond to that of Paeonia Radix described in literatures. Only P. lactoflora has a concentrated vascular bundle toward centeral cylinder. On the other hand, P. obovata has a scattered vascular bundle at the cortex. 5. Physicochemical pattern by HPLC Both P. lactoflora and P. obovata showed the same pattern. Paeoniforin, a main component, appears upon 13.68 in retention time (Rt) in both. In addition, both contain a large amount of paeoniflorin. Such results will, in the future, be used as basic source for the additional research, such as biological reactions and genetic discrimination.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.92-101
• /
• 2010

This study reports on the development of intelligent clothing using a shape memory alloy (SMA) that forms a still air layer and provides thermal insulation depending on the environment temperature. SMA springs were prepared with Nitinol and have an original length of 6mm and a latent length of 20mm with a response temperature of $24.5^{\circ}C$. Hysteresis was evaluated at a temperature between $0^{\circ}C$ and $40^{\circ}C$. An experimental outdoor jacket that was attached with 30 springs was compared with a commercial jacket in terms of the microclimate temperature, humidity, and comfort properties by human subject tests in the microclimate chamber set at $5{\pm}0.5^{\circ}C$. The results showed that the microclimate temperature of SMA embedded clothing system from the wear trials was higher than the commercial ones during the rest period after exercise, especially on the skin side. In addition the thermal, humidity, and comfort sensations of SMA embedded clothing were better than the commercial ones.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.7
• /
• pp.414-420
• /
• 2004

Among the desirable properties of a piecewise linear parameterization, guaranteeing a one-to-one mapping (i.e., no triangle flips in the parameter plane) is often sought. A one-to-one mapping is accomplished by non-negative coefficients in the affine transformation. In the Floater's method, the coefficients were computed after the 3D mesh was flattened by geodesic polar-mapping. But using this geodesic polar map introduces unnecessary local distortion. In this paper, a simple variant of the original shape-preserving mapping technique by Floater is introduced. A new simple method for calculating barycentric coordinates by using straightest geodesics is proposed. With this method, the non-negative coefficients are computed directly on the mesh, reducing the shape distortion introduced by the previously-used polar mapping. The parameterization is then found by solving a sparse linear system, and it provides a simple and visually-smooth piecewise linear mapping, without foldovers.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.655-658
• /
• 2006

Purpose: The main goals of correcting syndactyly of the hand are to form normal web appearance and to prevent motor dysfunction. We modified the original three-square-flap to improve interdigital web space and to reduce the wound healing problem due to tension. Methods: From July 2005 to February 2006, three cases of moderate to minor syndactyly were treated using modified three-square-flap. These flaps were made in such as way that the A flap from dorsal side, the B flap from the interdigital surface, and the C flap from the volar side. We modified the design of dorsal A flap as a hourglass shape instead of square shape to make normal hourglass shaped interdigital web and to reduce the tension of closure with other two flaps(B and C flap). The B and C flap were made as square shape. Results: During 4 to 10 months follow-up period, acceptable esthetic results were obtained without any specific complication, using our modification of the three-square-flap. Conclusion: Our method showed more satisfactory web appearance and was safe to use even in the cases of syndactyly secondary to burns and post-traumatic scars because of excellent blood circulation.

• Korean Journal of Human Ecology
• /
• v.9 no.1
• /
• pp.51-61
• /
• 2006

The purpose of this study is to examine the relation between the trend of art and fashion which predominate a certain time. In order to achieve this goal, this study intends to analyze how plasticity found in Mondrian's pictures are applied to modern fashion with its focus on formative elements. Mondrian was ahead of abstractionism, a major trend of contemporary art, and defined the theory of neo-plasticism. The theory of neo-plasticism defined by Mondrian is characterized by the limited expression of lines and shapes by using only vertical and horizontal straight lines, and right angles and four-sided figures weaved by the lines, and the use of achromatic color(black, white, and gray) in three primary colors(red, blue, and yellow). Based on his theory, he fully displayed the world of geometric abstraction. Mondrian's formative elements which have been applied in modern fashion can be divided into shape and color, For the element of shape, first, horizontal and vertical lines have been applied to patterns, trimmings, detail, and plane of textiles through simplification of design, representing proportion, balance, and stress in a silhouette, Second, plane and diamond shapes made of horizontal and vertical lines have been applied to textiles or patterns with uniqueness. For the element of color, first, three primary colors and achromatic colors are used to seek the aesthetics of balance and harmony that are produced in the strain of conflict through brightness, chroma, and complementary colors, Second, primary colors of high chroma and brightness which are much stronger than pictures are used to express a modern sense. Formative elements of neo-plasticism, which have been applied to modern fashion suggested by this study, are connected with the trend of art contemporary designers have borrowed, Accordingly, this study will become a very helpful material which provides designers with original ideas in developing materials and patterns which connect design with art.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.79-85
• /
• 2004

We report on a transmittance controlled photomask with phase patterns on the back quartz surface. Theoretical analysis for changes in illumination pupil shape with respect to the variation of size and density of backside phase patterns and experimental results for improvement of critical dimension uniformity on a wafer by using the transmittance controlled photomask are presented. As phase patterns for controlling transmittance of the photomask we used etched contact-hole type patterns with 180" rotative phase with respect to the unetched region. It is shown that pattern size on the backside of the photomask must be made as small as possible in order to keep the illumination pupil shape as close as possible to the original pupil shape and to achieve as large an illumination intensity drop as possible at a same pattern density. The distribution of illumination intensity drop suitable for correcting critical dimension error was realized by controlling pattern density of the contact-hole type phase patterns. We applied this transmittance controlled photomask to a critical layer of DRAM (Dynamic Random Access Memory) having a 140nm design rule and could achieve improvement of the critical dimension uniformity value from 24.0 nm to 10.7 nm in 3$\sigma$.TEX>.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.871-877
• /
• 2004

In this paper, for manufacturing a custom-made shoes, shape of foot acquired three-dimensional measurement device which makes shoe-last data for needing a custom-made shoes is founded on artificial intelligence technique and it shows method restoring to the original shape in optimized state. the developed system for this study is based on PC which uses existing three dimensional measurement method. And it gains shoe-last and data of foot shape going through 8 CCD(Charge Coupled Device) Which equipped top and bottom, right and left sides and 4 lasers which also equipped both sides and upper and lower sides. The acquired data are processed image processing algorithm using artificial intelligence technique. And result of data management is better quality of removing noise than other system not using artificial intelligence technique and it can simplify post-processing. So, this paper is constituted hardware and software system and it used neural network for determining threshold value, when input image on pre-processing step is being stage of image binarization and present that results.