• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.106-114
• /
• 1994

A new merging technique is adopted for combining rectangular parallelepipes produced by 2-D rectangular code into more intuitive 30D volume elements. Rectangular parallelepiped codes (RP codes) can be used in volume-based representation of a three-dimensional object. We proposed more regularity-conserving 2-D rectangular coding scheme to merge rectangular cells represented by RP codes in three-dimensional space. After being constructed from modified 2-D rectangular code, 3-D RP codes are merged in the two orthogonal directions using new merging algorithm. The shape of merged 3-D object reconstructed by proposed algorithm is shown to be much closer to the original object shape than that of conventional RP codes. The storage requirement of merged object can be also reduced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 춘계학술대회 논문집
• /
• pp.79-83
• /
• 1992

According to the variation of hydrostatic pressure on the central axis of deformable material, the V-shaped central bursting defect may be created on extrusion or drawing processes. The process factors whichaffect the generation of defects are die semi-angle, reduction ratio of cross-sectional area, friction factor, material properties and so on. The combination of these factors can determine the prossibility of defect creation and the shape of various round holes which have been created inside already. By the rigid plastic finite element method, this paper describes the observations of change in shape of a round hole with process conditions suchas die semi-angle, reduction ratio of cross-sectional area and friction factorat the unsteady state of axi-symmetrical extrusion process when the round hole is alreadyexisted inside the original billet, and also, the effects of process factors are investigated to prevent the possible defects.

• Tribology and Lubricants
• /
• 제17권1호
• /
• pp.33-39
• /
• 2001

A method of calculating wear volume is developed using the signal processing technique. The lowpass filter with Fourier transform and the “windowing” are implemented in the method. User-defining feature is also included in determining the cutoff frequency of the low-pass filter and the baseline for the volume integration. Commercial software, MatLab, is used for the programming. Since the method uses the original wear data without simplifying the wear shape, it can give a further accurate result than the previously utilized methods, which often adopted the simplification. It becomes further powerful if the contacting body has a general shape rather than that gives well-formed surface traction (e.g., the Hertzian). The validation of applying the average surface roughness, Ra, to the “windowing” and the baseline for volume integration is discussed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.695-698
• /
• 2008

Self-blast circuit breakers utilize the energy dissipated by the arc itself to create the required conditions for arc quenching during the current zero. During the arcing period, high pressure, temperature and radiation of the arc could burn in pure SF6 gas and PTFE nozzle. Ablated nozzle shape and $SF_6$-PTFE mixture vapor affect the performance of an self-blast circuit breaker. After a number of tests, nozzle in circuit breaker is disassembled, a section of ablated nozzle is investigated precisely. Using computational fluid dynamics, the conservation equation for the gas and temperature, velocity and electric fields within breaker is solved. Before applying a section model, developed program is verified with experimental data. Performance of ablated nozzle shape is compared with original model through analysis program.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1658-1667
• /
• 1993

In this research, a numerical algorithm has been developed, which can be applied to the large deformation and large displacement contact problems between two deformable bodies. The contact conditions expressed in terms of the rate of angle change have been proposed considering the change in geometric shape and rate of contact force. A set of linear simultaneous equations is constructed by adding the geometric shape change and contact conditions to the original stiffness matrix. A new method to determine time increment has been proposed based on Euler method, in which the condition to prevent the contact bodies from penetrating and overrunning each other has been taken into consideration. Practical application to contact problem is extrusion in which bodies are sliding along the contact boundary.

• 한국통신학회논문지
• /
• 제12권4호
• /
• pp.405-413
• /
• 1987

본 논문은 2-차원에서 3가지 형태(Square, Cross, X-shape)의 메디안 필터를 사용하여 레이다 영상의 원영상을 유지하면서 잡음을 제거하여 영상을 개선하고, 연산자를 적용하여 경계를 검출한다. 레이다 영상의 특성에서 곡선 부분이 많으므로 제안된 경계 검출 연산자에 의한 결과와 기존의 경계검출 방법인 Sobel, Prewitt, Robert, Laplacian. Kirsch의 결과를 비교한다.

• 대한음성학회지:말소리
• /
• 제31_32호
• /
• pp.9-22
• /
• 1996

This study aims to describe the acoustic characteristics of Korean nasal sounds making use of the notion of pole and zero. In case of [m], the 1st and 4th formant almost remains as the original shape respectively, on the contrary, the 2nd and 3rd formant were observed as a variable cluster together. Alveolar [n] shows that the 3rd and 4th formant make a variable cluster with their antiformant(zero), however, the 1st and 2nd formant keep the static shape of their on. Velar [$\eta$] has 4 formants below 2900 Hz and the 3rd and 4th formant constitute a variable cluster together as does the case [n]. With respect to the energy distribution in case of [n] and [$\eta$], the energy value diminishes from Fl up to F3 continuously but augments in F4. The [m] shows that in the region of Fl-F2 does the energy fall down and rise from F3 to above.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 추계학술발표 논문집
• /
• pp.111-115
• /
• 1998

A phase-shifting projection moire method particularly intended for high-speed three-dimensional shape reconstruction of diffuse objects is presented. Emphasis is on realization of phase-shifting fringe analysis in projection moire topography using a set of line grating pairs designed to provide different phase shifts in sequence. Further a time-integral fringe capturing scheme is devised to remove undesirable high frequency original grating patterns in real-time without time-consuming software image processing. Finally the performances of the proposed method are discussed with measurement results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.866-871
• /
• 1994

B-spline curves and surfaces are effective solutions for design and modelling of the freeform models. The control methods of these are using with control points, knot vectors and weight of NURBS. Using control point is easy and resonable for representation of general models. But the movement of control points bring out the reformation of original convex hull. The B-splines with nonuniform knot vector provide good result of the shape modification without convex hull reforming. B-splines are constructed with control points and basis functions. Nonuniform knot vectors effect on the basis functions. And the blending curves describe the prorities of knot vectors. Applying of these, users will forecast of the reformed curves after modifying controllabler primitives.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 춘계학술발표 논문집
• /
• pp.17-24
• /
• 1998

Noweays, The flow of international relations have to competition with product of each nation, a means of this competitoveness is developmennt of goods based on nation culture. That is in need to development of design have color of our country make sure of original design. Now we need a positive opposed to wants of consumers with expaneded market, so as to need of develogment of distinctive design. And then, this stuey have purpose analory of distinctive design as a ilustrate to case of traditional design with on a conjoint analysis, look into the modeling method and meaning of traditional design. At first, it setting up the base of design development, as a present into a investigate to extract course of shape's element for design distinction. And look around about the developing case of domestic company and modeling method, a pattern of traditional design development, As on of distinction's way has doing conjoint analysis for abstract to character of traditional form and have devdloping to product with a present expression elements and design concept for a basis.