• 제목/요약/키워드: Orifice

검색결과 1,067건 처리시간 0.022초

내시경점막하박리술의 적응증을 넘어선 조기위암의 미세침습 치료 후 장기 추적 결과 (Long-term Outcome after Minimally Invasive Treatment for Early Gastric Cancer beyond the Indication of Endoscopic Submucosal Dissection)

  • 고원진;조주영
    • Journal of Digestive Cancer Research
    • /
    • 제5권1호
    • /
    • pp.44-49
    • /
    • 2017
  • Background: 최근 제안된 조기위암에 대한 미세침습 치료법은 내시경점막하박리술(endoscopic submucosal dissection, ESD)혹은 종양 부위를 전층 절제(endoscopic full-thickness gastric resection, EFTGR)을 통해 위 절제를 최소화하고 동시에 복강경을 통해 감시림프절 절제(sentinel lymph node dissection, SLND)를 시행함으로써 그 가능성을 제시했었고, 이들을 각각 ESN (endoscopic submucosal dissection with laparoscopic sentinel lymph node dissection), Hybrid-NOTES (endoscopic full-thickness gastric resection with laparoscopic sentinel lymph node dissection)라고 명명하였다. 본 고에서는 림프절 전이 위험성이 높은 조기위암에 대해 이 두 치료법을 시행받은 환자들의 장기 추적 결과를 평가하고자 한다. Methods: 이 후향적 연구는 2009년 1월부터 2013년 5월 중에 ESN 혹은 Hybrid-NOTES를 시행받은 환자들이 포함되었다. Results: 총 42명의 환자들이 연구에 포함되었고, ESN 21명, Hybrid-NOTES 21명이 각각 등록되었다. ESN을 시행받은 21명 중 4명, Hybrid-NOTES를 시행받은 5명은 이 미세침습수술 후 추가 수술을 받아야 했다. 아직까지 이 수술 후 사망 환자는 없지만 ESN을 시행받은 1명의 환자에서 림프절 전이가 발견되어 항암치료를 받고 있다. Conclusion: 조기위암의 미세침습 수술인 ESN 혹은 Hybrid-NOTES는 좋은 장기 추적 결과를 보여주었다. 이 방법들은 향후 림프절 전이 위험성이 높은 조기위암에서 ESD와 gastrectomy 사이에 속한 환자들에게 좋은 치료법이 될 수 있을 거라고 생각된다.

  • PDF

전방십자인대의 전내측 다발 및 후외측 다발을 각각 재건하는 새로운 수술 수기 (New Technique for the Reconstruction of Both Anteromedial & Posterolateral Bundles of ACL)

  • 하철원;어수익
    • 대한관절경학회지
    • /
    • 제6권2호
    • /
    • pp.195-199
    • /
    • 2002
  • 목적 : 전방십자인대 재건술시에 수술 수기가 크게 어려워지지 않으면서 전내측 및 후외측 다발을 각각 재건하고 별도로 긴장시켜 고정할 수 있는 수술 수기를 고안하여 재건슬을 시행한 결과, 해부학적 및 기능적으로 보다 정상에 가까운 전내측 및 후외측 다발의 긴장도를 갖는 전방십자인대 재건이 가능하였기에 그 수술 수기를 보고하고자 한다. 대상 및 방법 : 고식적인 관절 내시경적 전방십자인대 재건술과 동일한 기구를 사용하여 경골 및 대퇴골에 골터널을 만든다. 이때 경골부위의 골 터널이 일반적인 경우보다 약간 타원형이 되면서 약 $5\~7$ mm 정도 앞뒤 족으로 확장되도록 한다. 이식을 위한 동종 아킬레스건을 다듬을 때, 대퇴골 터널 내에 들어갈 골 부위는 고식적인 경우와 같도록 하고, 경골부 터널에 들어갈 건 부위는 가능한 한 두껍게 준비하고, Y자로 두 개의 다발로 만들어 각각 봉합사를 이용하여 마무리, 준비한다. 두 개의 다발을 함께 준비용 수술용 탁자의 터널 내로 통과시켜보면서 두께를 확인하고 대퇴골 터널 내에 동종 아킬레스건의 골 부위를 관절경 시야에 삽입시킨 후 고정한 다음, 경골 터널의 원위부 바깥쪽에서 두 개의 다발을 봉합사와 함께 당기면서 슬관절을 굴곡-신전을 반복하여 신장시킨다. 슬관절을 약 90도 굴곡한 상태에서 전내측 다발을 최대한 긴장시켜 post-tie 방법으로 고정한 후 다시 슬관절을 신전시킨 상태에서 후외측 다발을 최대한 긴장시켜 post-tie 방법으로 고정한다. 이후 2개의 다발사이로 끝이 둥근 유도핀을 삽입하여 관절경 시야에서 경골 터널 근위 입구에서 2개의 다발사이에 위치한 것을 최종 확인한 후, 흡수성 간섭나사를 이 핀을 따라 삽입하여 경골 터널 근위부 입구 직하부까지 전진시켜 좀더 견고한 고정을 얻으면서 전내측 및 후외 측 다발을 더욱 해부학적 위치에 자리잡을 수 있도록 한다. 연골 손상이 발생될 수 있다는 것을 염두에 두어야할 것으로 생각된다.있는 골 미성숙 환자의 전방 십자 인대 재건술은 하지부동이나 슬관절 정열이상이 없는 좋은 치료방법으로 생각된다.측에 발생하여 내측에 비해 많았으며 17례$(89.5\%)$에서 반월상연골 파열이 동반되었고 파열의 형태는 수평 파열이 15례$(79\%)$로 가장 많았다. 때, 이 두 집단 사이의 진단당시의 임상양상의 차이를 보면 고혈압, 단백뇨 및 부종의 빈도가 Group I에서 통계적으로 유의하게 증가되어 있으며, 임상병리검사 소견에서는 혈중 총단백량, 알부민, creatinine 청소율이 Group I에서 통계적으로 유의하게 감소되어 있고, BUN, creatinine은 통계적으로 유의하게 증가되었다. 결 론 : Alport 증후군 환아에서 임상적으로 유의미한 예후와 관련된 위험요인으로는 진단시의 고혈압, 부종, 단백뇨 유무 여부와 혈중 총단백량, 알부민, BUN, creatinine, 사구체 여과율이 중요하며, 이런 가능한 위험요인의 분석과 관찰이 Alport 증후군 환아의 치료와 예후 인지에 많은 도움이 되리라 사료된다. 상승은 주로 간에서 생성의 증가의 발생함을 알 수 있었다. 또한 지단백중 스테로이드를 사용하기전의 HDL cholesterol, apoB, apoB/HDL cholesterol등은 관해 유도기간과 의미 있는 양의 상관관계를 보여서 신증후군 환아의 재발을 예측 할 수 있는 지표로서 임상적인 의미를 부여할 수 있을 것이다. 또는 세포독성물질로도 스테로이드 의존성을 없애거나 재발율을 낮출 수 없었던 스테로이드 의존성 미세변화형 신증후군의 치료에서는 스테로이드 의존성 혹은 재발율의 변화를 나타내지 못하였다. 따라서 장기간의 MP 요법은 스테로이드 및 면역억제제 치료에 저항성을 보이는 1차성 또는 2차성 신증후군의 치료에

  • PDF

대학교 행정실 실내 외 공기 중 나노입자와 중금속 농도에 관한 연구 (A Study on the Concentration of Nanoparticles and Heavy Metals in Indoor/Outdoor Air in a University Administrative Public Office)

  • 최수현;임지영;박희진;정은경;김종오;손부순
    • 한국환경보건학회지
    • /
    • 제38권6호
    • /
    • pp.493-502
    • /
    • 2012
  • Objectives: The purpose of this study is to investigate the mass concentration of nanoparticles and understand the characteristics of elements of heavy metal concentrations within nanoparticles in the air using Micro-Orifice Uniform Deposit Impactor Model-110 (MOUDI-110), based on indoor and outdoor air. Methods: This Study sampled nanoparticles using MOUDI-110 indoors (office) and outdoors at S University in Asan, Korea in order to reveal the concentration of nanoparticles in the air. Sampling continued for nine months (10 times indoors and 14 times outdoors) from March to November 2010. Mass concentrations of nanoparticle and concentrations of heavy metals (Al, Mn, Zn, Ni, Cu, Cr, Pb) were analyzed. Results: Indoors, geometric mean concentration of nanoparticles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 0.929 ${\mu}g/m^3$ and 1.002 ${\mu}g/m^3$, respectively. On the other hand, the levels were lower outdoors with 0.819 ${\mu}g/m^3$ and 0.597 ${\mu}g/m^3$. Mann-Whitney U tests showed that the difference between the indoors and the outdoors was statistically meaningful in terms of particles of 0.056 ${\mu}m$ or less (p<0.05) in size. These results are possibly influenced by the use of printers and duplicators as the factor that increased the concentration of nanoparticles. In seasonal concentration distribution, the level was higher during the summer compared to in the autumn. Those of 0.056 ${\mu}m$ or less in size presented a statistically meaningful difference during the summer (p<0.05). These results may be influenced by photochemical event as the factor that makes the levels high. Regarding zinc, among the other heavy metals, the fine particles ranged in size from 0.056 ${\mu}m$ to 0.10 ${\mu}m$ and those of 0.056 ${\mu}m$ or less recorded 1.699 $ng/m^3$ and 1.189 $ng/m^3$ in the outdoors. In the indoors, the levels were lower, with 0.745 $ng/m^3$ and 0.617 $ng/m^3$. Cr and Ni at the size of 0.056 ${\mu}m$ or less, both of which have been known to pose severe health effects, recorded higher concentrations indoors with 0.736 $ng/m^3$ and 0.177 $ng/m^3$, compared to 0.444 $ng/m^3$ and 0.091 $ng/m^3$ outdoors. By season, Zn, Ni, Cu and Pb posted a high level of indoor concentration during the fall. As for Cr, the level of concentration indoors was higher than outdoors both during the summer and the autumn. Conclusion: This study indicates the result of an examination of nano-sized particles and heavy metal concentrations. It will provide useful data for the determination of basic nanoparticle standards in the future.

수 종의 근관충전재의 열팽창 특성 측정 : Gutta-percha와 Resilon (Measurement of thermal expansion characteristic of root canal filling materials : Gutta-percha and Resilon)

  • 전경아;이인복;배광식;이우철;백승호
    • Restorative Dentistry and Endodontics
    • /
    • 제31권5호
    • /
    • pp.344-351
    • /
    • 2006
  • 근관충전재로 사용되는 gutta-percha의 대체재로서 Resilon이라는 bioactive glass와 약간의 방사선 불투과성 성분을 포함하는 열가소성 고분자가 최근 소개되었다. 본 연구에서는 열연화 주입식 gutta-percha와 Resilon의 열팽창 특성을 측정하고 상호 비교하였다. 실험재료 중 gutta-percha 군으로는 Obtura, Diadent 그리고 Metadent사의 gutta-percha를, Resilon으로 Pentron사의 Epiphany를 사용하였다. 열가압주입기인 Obtura II에 4가지 재료를 넣고 설정온도를 $100^{\circ}C$, $150^{\circ}C$, $180^{\circ}C$ 그리고 $200^{\circ}C$로 바꾸어 가며 각 온도에 대해서, heat-ing chamber 입구에서의 온도와 23 게이지와 20 게이지의 needle에서 사출되는 재료의 온도를 디지털 thermometer를 이용하여 측정하였다. 열팽창을 측정하기 위해 세라믹으로 내경 3 mm, 외경 10 mm. 길이 27 mm의 원통형 주형을 제작하였고, 주형 안에 각 재료를 채워 넣은 후 양끝을 세라믹 공이 (plunger)로 막았다. 이 시편을 dilatometer에 넣고 가열하여 $25^{\circ}C$에서 $75^{\circ}C$까지의 범위에서 열팽창 곡선을 얻었다. 온도에 따른 시편의 길이 변화로부터 각 재료의 열팽창 계수와 전체부피에 대한 팽창량을 계산하였다. 모든 재료에서 온도가 증가함에 따라 $45^{\circ}C$ 이하에서는 재료의 부피변화가 거의 없었고, $45^{\circ}C$에서 $55^{\circ}C$ 구간에서 급격히 팽창하였으며 그 이상의 온도에서는 완만한 부피의 증가를 보였다. $35^{\circ}C$에서 $55^{\circ}C$ 사이에서의 부피의 변화는 재료들 사이에 통계적으로 유의한 차이가 없었으며 (p > 0.05). $35^{\circ}C$에서 $75^{\circ}C$사이의 부피의 변화는 Obtura 사 gutta-percha가 Metadent사와 Diadent사의 gutta-percha에 비해 유의하게 작은 것으로 나타났다 (p <0.05). Epiphany는 gutta-percha 군들과 비슷한 열팽창을 보였다 (p > 0.05).

공기조화, 냉동 분야의 최근 연구 동향 - 1998년 1999년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research - A Review of papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 1998 and 1999 -)

  • 이재헌;김광우;김병주;이재효;김우승;조형희;김민수
    • 설비공학논문집
    • /
    • 제12권12호
    • /
    • pp.1098-1125
    • /
    • 2000
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

  • PDF

("황제내경소문(黃帝內經素問)" 중(中) 사혈(瀉血)에 관한 연구(硏究) (A Study on the Blood-Letting Therapy in Elementary Questions)

  • 이준근
    • 대한한의정보학회지
    • /
    • 제14권1호
    • /
    • pp.19-42
    • /
    • 2008
  • Blood-Letting Therapy is a rational and ecological medical treatment by which we can heal most of the diseases by removing the static blood which precipitates in the blood vessel and blocks the flowing of blood. And the static blood is the generic term for the injurious, bad, dead and precipitated blood which is blocked the capillary vessel. The Yellow Emperor's Canon of Internal Medicine says that "the patient is treated with drugs internally and stone acupuncture externally. "In the old texts, the blood-letting therapy is mentioned as blood-letting, network vessel pricking, bloodletting, pricking, and arousing pulses etc and it is noted down as the method of network vessel pricking in 'On the Application of Needles' of Spiritual Pivot. Nine-pricking therapy, twelve-pricking therapy and five-pricking therapy are recorded in the methods of network vessel pricking and among them, the method of squeezing blood after pricking the affected part is explained as the network vessel pricking. There are four methods of network vessel pricking, pricking, picking, cluster needling and scatter-pricking and they are fluidly applied to the various symptoms of diseases. In 'On Discriminative Treating for Patients of Different Regions' in Elementary Questions, Ki-baek emphasizes "most of the local people, there are black in skin and loose in striate, and their diseases are mostly of carbuncle kind. It is suitable to treat the disease with stone therapy to prick with stone, so the stone therapy is transmitted from the east. "And in 'On the Corresponding Relation Between the Eum and Yang of Man and All Things' in Elementary Questions, when the Emperor asked Ki-Back, he answered "sthenia means the sthenia of evil, and deficiency means the deficiency of healthy energy. When the blood is sthenic, the evil should be discharged by pricking when out letting the blood; deficiency of vital energy is the asthenia of channels and network vessels, so the energy should drain from the channel which is not deficient, to replenish. "And in this case we can use the methods of 'Breaking out the static bloods', 'driving out the static bloods', blood-letting'. With this we can infer that the blood-letting therapy is made use of the important medical treatments from the ancient times. Especially in referring to the principles of treatment in The Yellow Emperor's Canon of Internal Medicine, it mostly alluded to acupuncture therapies and only eleven times to medicinal treatments. This is to verify that the blood-letting therapy formed the foundation of the medical art. In Dong's Therapy of Acupuncture-Moxibustion and Bloodletting, Dong Kyeong-Chang gave emphasis on the points that there must be extravasated bloods without exception in the serious illnesses which is old, unnatural, accompanying acute pains and so we can revive our body‘s sprit by circulating 'gi' and static blood piled up in the network vessel, regulating the weakness and strength, and controling the disharmony of the internal organs. The blood-letting therapy has effect on the orifice in emergency, such as fore draining, freeing network vessels, harmonizing gi and blood, relieving pain, dispersing swelling and concretion, sedation, resolving toxin as well as strengthening the heart, relieving itching. So it has distinguished effect on all kinds of medical treatment to the modern people. But by the change of social customs and the confucianism of confucius - it is widely spread on the period of North and South Dynasties, 'Wi' and 'Jin' in china and the period of the Three States in korea - The blood-letting therapy which was regarded as the most important medicinal treatment withered rapidly. And Confucius accentuated the importance of our body and all its members, loyalty and filial piety and banned any damage of our body under no circumstances. As a result of it, the therapy of blood-letting had a rapid decrease and barely kept itself in existence in both countries. What is worse, at the period of Japanese colonial rule of korea and our nation's founding of early stage, it has been withered by the high-handed policy to change Oriental Medicine into modern medical science. So the therapy of blood-letting barely kept itself in existence in some Buddhist temples. Another case, it has handed down as a old-fashioned quick fix in folk remedies. But all kinds of the contamination of heavy metals and the misuses of antibiotics are widely spread nowadays, which increased diseases of adult people and incurable diseases as modern society unavoidably made its way into a highly industrial society. To make us more miserable, the western medical science - the antibiotics and surgical operation medical science - already reveals itself into a limit. The necessity of a new medical science which can give a security to the patients who are suffering from the diseases of adult people and the incurable diseases is especially come into the force nowadays. In view of the results after bibliographically studying on the blood-letting Therapy in Elementary Questions of the Yellow Emperor's Canon of Internal Medicine, the blood-letting therapy has acted for the important Oriental medicinal science and has been clarified the prominent effects on the diseases of adult people and the incurable diseases. So it is regarded as an appropriate thing that we lay out a determined theory of the blood-letting therapy and of course prevent the unwanted side effects from inappropriate medicinal treatments, and make full use of clinic by elevating the curative value and that we win back our self-respect of medical treatment which is dominated from the western medical science and ultimately contribute to national medical welfare.

  • PDF

엔진구동형 NiTi 파일의 근관성형효과 비교 (A COMPARISON OF THE SHAPING ABILITY OF FOUR ROTARY NICKEL-TITANIUM FILES IN SIMULATED ROOT CANALS)

  • 김보혜;최경규;박상혁;최기운
    • Restorative Dentistry and Endodontics
    • /
    • 제35권2호
    • /
    • pp.88-95
    • /
    • 2010
  • 이 연구의 목적은 4가지 엔진구동형 NiTi 기구의 근관성형력을 비교하는 것이다. 32개의 투명레진모형을 사용하여 파일의 단면도가 S자 형태이고 "single length"방법으로 근관성형을 시행하는 Mtwo와 crown-down 방법으로 근관성형을 하는 Profile, ProTaper Universal 및 K3로 근관성형을 하였다 (n = 8). 모든 근관은 한사람의 술자가 근단공 크기가 #30이 될 때까지 성형하였다. 기구 사용 전과 후 근관 모양을 디지털 영상을 기록하였고, 컴퓨터 영상 분석 프로그램(Expression Scanner와 Adobe Photoshop CS)으로 평가하였다. 다음과 같은 결론을 얻었다. 근첨으로부터 1, 2, 3, 4, 5, 6, 7 mm 떨어진 부위의 내측과 외측으로 삭제된 레진 양을 측정하였고, 자료는 SPSS법으로 비교 분석하였다. 1. 근관형성 시간은 Mtwo가 84.50초로 가장 짧았으며, 총 작업시간은 K3가 269.37초로 가장 길었다(p < 0.05). 2. 기구의 변형과 파절은 모든 구동형 NiTi 파일에서 발생하지 않았다. 3. 근관 내측 폭경의 변화는 Profile이 1, 2 mm 부위를 제외한 다른 부위에서 가장 적었으며, ProTaper Universal은 모든 부위에서 가장 많았다(p < 0.05). 4. 근관 외측 폭경의 변화는 Mtwo이 1 mm 부위를 제외한 모든 부위에서 가장 적었으며, Profile은 3, 4 mm 부위에서 가장 많았다(p < 0.05). ProTaper Universal와 K3는 1, 2, 6, 7 mm 부위에서 가장 많았다(p < 0.05). 5. 근관중심변위율(centering ratio)은 Profile이 1, 4, 5, 6 mm 부위에서 가장 적었다(p < 0.05). 이상의 결과, 구동성 NiTi 파일을 이용한 만곡 근관의 근관형성은 치경부는 ProTaper와 같은 삭제력이 높은 파일을 사용하는 것이 근관 입구를 효과적으로 넓히고 더 나은 taper를 형성하며, 근단부는 Profile과 같은 근관 중심 변위가 적은 파일을 사용하는 것이 근관형성 시간을 단축하고 근단부의 근관 변형(transportation)을 줄일 수 있다고 판단된다.