• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3604-3613
• /
• 2022

The Physical Protection System (PPS) plays an important role and must effectively deal with various adversary attacks in nuclear security. In specific single adversary path scenarios, we can calculate the PPS effectiveness by EASI (Estimated Adversary Sequence Interruption) through Probability of Interruption (P_I) calculation. EASI uses a single value of the probability of detection (P_D) and the probability of alarm communications (P_C) in the PPS. In this study, we develop a multi-path analysis code based on EASI to evaluate the effectiveness of PPS. Our quantification method for P_I considers the variability and uncertainty of P_D and P_C value by Monte Carlo simulation. We converted the 2-D scheme of the nuclear facility into an Adversary Sequence Diagram (ASD). We used ASD to find the adversary path with the lowest probability of interruption as the most vulnerable paths (MVP). We examined a hypothetical facility (Hypothetical National Nuclear Research Facility - HNNRF) to confirm our code compared with EASI. The results show that implementing the variability extension can estimate the P_I value and its associated uncertainty. The multi-path analysis code allows the analyst to make it easier to assess PPS with more extensive facilities with more complex adversary paths. However, the variability of the P_D value in each protection element allows a significant decrease in the PI value. The possibility of this decrease needs to be an important concern for PPS designers to determine the P_D value correctly or set a higher standard for PPS performance that remains reliable.

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1563-1570
• /
• 2017

In order to perform dry interim storage and transportation of the spent-fuel assemblies of the Bushehr Nuclear Power Plant, dual-purpose casks can be utilized. The effectiveness of different neutron-shield materials for the dual-purpose cask was analyzed through a set of calculations carried out using the Monte Carlo N-Particle (MCNP) code. The dose rate for the dual-purpose cask utilizing the recently developed materials of $epoxy/clay/B_4C$ and $epoxy/clay/B_4C/carbon$ fiber was less than the allowable radiation level of 2 mSv/h at any point and 0.1 mSv/h at 2 m from the external surface of the cask. By utilization of $epoxy/clay/B_4C$ instead of an ethylene glycol/water mixture, the dose rates on the side surface of the cask due to neutron sources and consequent secondary gamma rays will be reduced by 17.5% and 10%, respectively. The overall dose rate in this case will be reduced by 11%.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.35-43
• /
• 1997

Concurrent Engineering is one of the methods which are used for the rapid product development. One of the important features in Concurrent Egineering is that the development process is to be parallel and the organization should be cross-functional. In order that the process be parallel and that the organization be cross-functional, an integrated information system such as PDM (Product Data Management) is required. Although the integrated data base is constructed, it could be meaningless if the application softwares were not inter-operable. This study shows an example of intergrated information system from three-dimensional product design to mold design and tooling for the development of Deflection Yoke(DY) which is one of the important parts of Cathode Ray Tube(CRT). A three-dimensional product design software, which is based on a commercial code, has been developed by ourselves. Selective Laser Sintering(SLS), which is one of the rapid prototyping techniques, has been used in this study. Mold design has been done by the three-dimensional way. A newly developed method of mold tooling, which is called Quick Die Manufacturing(QDM), has been introduced.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권2호
• /
• pp.163-170
• /
• 2017

The International Convention for the Control and Management of Ships' Ballast Water and Sediments (hereafter "BWM Convention") will be enforced beginning on September 8, 2017. Even though the STCW Convention (International Convention on Standards of Training, Certification and Watchkeeping for Seafarers) and other international instruments require all ship personnel be qualified under certain competencies and standards, the International Maritime Organization (hereafter "IMO") has no unified requirements for training ship personnel on ballast water management. When the BWM Convention enters into force, all officers and crew on board ships should be intimately familiar with the guidelines and procedures outlined by the BWM Convention, regarding, among other topics, proper record keeping techniques and measures, the layout of the ballast control system, methods of ballast water exchange, and inspections by the port state control. To ensure that officers and crew members are adequately familiar, this paper proposes new competency requirements for ballast water management training and education to be added to the STCW Code. To support the introduction of these new competency requirements, this paper explores the evolution of the BWM Convention and examines how international regulations will be used to implement it.

• 선박안전
• /
• 통권31호
• /
• pp.81-96
• /
• 2011

The transportation of oil has increased due to the growth of marine industries and oil refineries. Oil residues and waste discharged to the ocean has increased due to accidental and/or intentional discharges. The International Marine Organization(IMO) has made compulsory that every oil tanker of 150 gross tonnage and above and every ship of 400 gross tonnages other than tankers and above should be provided with an oil record book. The entries in the oil record book should be made in accordance with the IMO guidelines. Specifically, engine room generated oil residues should be recorded in the oil record book from January 1, 2011. Also, the developed IMO guideline should be added for the prevention of dispute with the Port State Control Officers and(or) Tanker Vetting Inspectors. This oil record book will be in operation and of valued assistance to the marine officers, according to the IMO policy for the prevention of the waste oil and the oil mixtures from the machinery space. For the convenience, added Code & Item No. list, FAQs and reviewed and revised Examples.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.466-468
• /
• 2012

선박산업에서의 국내외 해양사고 통계에 의하면, 모든 해양사고의 80% 정도가 직접적 또는 간접적으로 관련된 인적요인(Human Factors)에 의하여 발생한다고 보고되고 있다. 이러한 해양사고의 원인을 규명함으로써 유사 해양사고의 발생을 방지하고, 또한, 해양사고 조사에 있어서 공통적인 접근방법의 이용과 국가 간의 협력을 증진시키기 위한 목적으로, IMO(International Maritime Organization)에서는 해양사고 인적요인 조사지침(Guidelines for the Investigation of Human Factors in Marine Casualties and Incidents)을 포함한 해양사고조사코드(Casualty Investigation Code: Code of the International Standards and Recommended Practices for a Safety Investigation into a Marine Casualty or Marine Incident)를 채택하였으며, 동 코드는 2010년 1월 1일 발효되었다. 이에 따라, 해양안전심판원에서는, 3단계 절차로 구성된 인적요인 조사 및 분석 방법론을 제안하고, "해양사고 인적요인 분석 매뉴얼"을 마련하였다. 본 논문에서는, 해양안전심판원에서 제안한 인적요인 조사 및 분석 방법론을 실제 해양사고에 적용하여 인적요인 조사분석 모델의 적용사례를 마련하고, 분석 모델을 검토 및 보완하고자 한다.

• 한국압력기기공학회 논문집
• /
• 제16권1호
• /
• pp.117-124
• /
• 2020

3D printing is a technology that has significantly grown in recent years, particularly in the aerospace, defense, and medical sectors where it offers significant potential cost savings and reduction of the supply chain by allowing parts to be manufactured on-site rather than at a distance supplier. In nuclear industry, 3D printing technology should be applied according to the manufacturing trend change. For the application of 3D printing technology to the nuclear power plant, several problems, including the absence of code & standards of materials, processes and testing & inspection methods etc, should be solved. Preemptively, the improvement of reliability of 3D printing technology, including mechanical properties, structural performance, service performance and aging degradation of 3D printed parts should be supported. These results can be achieved by collaboration of many organizations such as institute, 3D printer manufacturer, metal powder supplier, nuclear part manufacturer, standard developing organization, and nuclear utility.

• 한국한의학연구원논문집
• /
• 제10권1호
• /
• pp.1-14
• /
• 2004

As entering the information age of the 21st century, Korea is actively processing many digitalizing businesses related to information source of the Korean academic science at the government level based on the Korean advanced digital technologies, which makes them more evolved through the internet networks in Korea. The definition of 'Newly found ideographs(新出漢字)' are made by researching and extracting from the old Chinese documents through the digitalizing process and they are not registered yet among the block of Unicode & extended Chinese characters those are existent international standard. Presently Korea is in the middle of brisk developing computerized old documents in the huge scale. Meanwhile, the international standard of Chinese characters in mostly Asian countries where using them is processing and developing by IRG. Therefore, Korean processing works is very important which are included extracting precisely 'Newly found ideographs' founded from building its database, organizing as an international standard code, submitting the International organization and finally registering as the best standard code.

• 복식
• /
• 제44권
• /
• pp.168-179
• /
• 1999

In order to settle down structural causes of the process of distribution and apparel production in domestic fashion industry, and to raise competitive power with changing market environment, we need to bulid up Quick Response(QR) system based on information technology such as EDI(Electronic Data Interchange), KAN(Korea Article Number), and POS(Point of Sales), POS is the most valuable information tool to promote QR system paractically. The purpose of this study was to investigate motivation of POS adoption, problems in operating the system, and satisfaction on POS effects. Data were collected by sending questionnaire to the managers in apparel firms which were using POS. Statistical devices were t-test, frequency with SAS program. The results fo the study were as follows: 1. The degree of satisfaction to POS effects was rather good. Especially, rapid evaluations on new products gave the greatest satisfaction to the users. 2. Satisfaction degree of POS effects according to introduces time and organization characteristic(number of employees) have no significant difference, but the firms which have higher annual sales volume showed higher satisfaction degree. Merchandise department showed higher satisfaction on POS effects. 3. The motivation of POS adoption was an effective logistics control with consumer information as a marketing strategy. The problems in operating the system were lack of investment, and professionals. They almost didn't have KAN code, instead, have their own code system.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.709-716
• /
• 2017

Purpose: NCS(National Competency Standards) is a systematic organization of knowledge, skills, and literacy required for performing tasks in industrial settings. This research aims to search for keywords that are important to us and to present key directions of education for the fourth industrial age in the future. Methods: The systematic classification system of NCS was investigated and the classification code structure was analyzed. Among them, the frame and structure analysis of the classification code of quality was analyzed using R-program. Results: This study grasped the quality classification situation of NCS and suggested improvement plan from the operational aspect of the fourth industrial revolution era. Conclusion: In conclusion, this study suggested the idea of education direction of SMEs(Small and Medium-sized Enterprises) in the era of the 4th industrial revolution by understanding NCS which reflects Korean characteristics.