• Title/Summary/Keyword: Organization code

Search Result 183, Processing Time 0.191 seconds

Time uncertainty analysis method for level 2 human reliability analysis of severe accident management strategies

  • Suh, Young A;Kim, Jaewhan;Park, Soo Yong
    • Nuclear Engineering and Technology
    • /
    • 제53권2호
    • /
    • pp.484-497
    • /
    • 2021
  • This paper proposes an extended time uncertainty analysis approach in Level 2 human reliability analysis (HRA) considering severe accident management (SAM) strategies. The method is a time-based model that classifies two time distribution functions-time required and time available-to calculate human failure probabilities from delayed action when implementing SAM strategies. The time required function can be obtained by the combination of four time factors: 1) time for diagnosis and decision by the technical support center (TSC) for a given strategy, 2) time for strategy implementation mainly by the local emergency response organization (ERO), 3) time to verify the effectiveness of the strategy and 4) time for portable equipment transport and installation. This function can vary depending on the given scenario and includes a summation of lognormal distributions and a choice regarding shifting the distribution. The time available function can be obtained via thermal-hydraulic code simulation (MAAP 5.03). The proposed approach was applied to assess SAM strategies that use portable equipment and safety depressurization system valves in a total loss of component cooling water event that could cause reactor vessel failure. The results from the proposed method are more realistic (i.e., not conservative) than other existing methods in evaluating SAM strategies involving the use of portable equipment.

소프트웨어 규모산정을 위한 기능점수 개선 Micro-FP 모형의 제안 (An Enhanced Function Point Model for Software Size Estimation: Micro-FP Model)

  • 안연식
    • 한국컴퓨터정보학회논문지
    • /
    • 제14권12호
    • /
    • pp.225-232
    • /
    • 2009
  • 소프트웨어 규모 측정에 국제표준(IFPUG, FPA)에 기반한 기능점수 방식은 개발자 관점이 아닌 사용자 관점의 접근이라는 장점으로 널리 활용되고 있다. 그러나 현재의 기능점수 측정 방식은 복잡도 적용에서의 상한이 존재하는 등 문제점을 내포하고 있다. 본 논문에서는 이러한 복잡도 상한의 문제를 극복하고, 회귀식을 내장하고 있어 쉽게 소프트웨어 규모를 측정할 수 있으며, 특히 대형 애플리케이션에도 적용할 수 있는 개선된 기능점수 측정모델을 제시한다. 조직내에서 운영중인 10개 애플리케이션에 적용하여 적합성을 평가한 결과, 제시한 개선 모형이 기존의 FPA(Function Point Analysis) 방식보다 LOC(Line of Code) 규모를 비교하여 상관관계가 더 높은 장점을 확인할 수 있었다.

상업 패턴을 포함한 의류 DIY 패키지 개발 (The Development of Clothing DIY Packages Including Commercial Patterns)

  • 이은혜
    • 한국의류산업학회지
    • /
    • 제25권3호
    • /
    • pp.333-345
    • /
    • 2023
  • The rising demand for fashion do-it-yourself (DIY) products that cater to individual preferences and which allow for creative expression has highlighted the need for systematic organization within the clothing society. This study addresses this gap by identifying and discussing clothing DIY packages and proposes a systematic package model comprising essential raw materials, commercial patterns, and production instructions. Four key elements have been emphasized to differentiate and enhance the product. Firstly, highly practical commercial patterns have been developed to facilitate easy transformations - from blouses to dresses. Furthermore, the versatility of these patterns has been optimized so as to allow their utilization as outerwear, increasing their efficiency. Secondly, to accommodate diverse body shapes, the package offers six different sizes, providing users with a range of options tailored to their specific measurements. Thirdly, detailed production instructions are provided, supplemented by a Q&A bulletin board. The instructions are available in a printed format, featuring actual photographs on A4 paper, while video production instructions are accessible via a QR code, ensuring comprehensive guidance. Lastly, the basic package comprises clothing patterns, production instructions, fabrics, and labels, providing a complete toolkit for clothing DIY enthusiasts. This study aims to contribute to the development of the hobby sewing field and to establish a practical resource for the clothing DIY package industry.

유령수술행위의 형사책임 - 미용성형수술을 중심으로 - (Criminal Liabilities of Ghost Surgery)

  • 황만성
    • 의료법학
    • /
    • 제16권2호
    • /
    • pp.27-53
    • /
    • 2015
  • 최근, 서울의 성형수술 병원에서 중국 여성 환자가 사망한 원인이 대리 의사의 무단 유령수술 때문이 아니냐는 의혹이 제기되었다. 사고가 발생한 후, 소비자시민모임과 한국환자단체연합회는 지난 3월 유령수술감시운동본부를 발족시켰다. 환자가 알지 못하는 상태에서 환자의 동의 없이 담당 의사를 교체하는 것은 사기행위이자 기본적인 윤리를 저해하는 행위이다. 환자는 1명의 인간으로서 자신을 치료할 의사를 선택할 권리가 있으며, 대리의사를 용인하거나 거부할 수 있는 권한도 환자에게 부여되어야 한다. 환자가 수술을 허락한 사람은 집도의라는 점을 유의해야 한다. 환자는 자신이 계약한 의사로부터 치료를 받을 권리가 있다. 환자를 치료하는 의사는 환자-의사 관계를 창출하는 계약이 허용하는 범위 내에서 자신의 능력껏 수술을 시행할 의무가 있다. 그는 환자로부터 부여 받은 수술 권한을 다른 사람에게 위임할 수 없다. '유령수술은 형법 제257조(상해, 존속상해)가 적용된다. 환자가 알지 못하는 상태에서 환자의 동의 없이 집도의를 교체하는 것은 상해행위이다. 이 부분이 쟁점인데, '유령 수술이 형법 제347조(사기)와도 연관이 있기 때문이다. 환자가 알지 못하는 상태에서 환자의 동의 없이 다른 의사가 수술을 대신하는 것이 사기 행위에 해당하는지 하는 문제도 쟁점이 될 수 있다. 뿐만 아니라, 유령 수술은 의료법 제27조(무면허 의료행위 등 금지), 제22조(진료기록부 등), 제33조(개설 등)와도 관련이 있다. 환자에 대한 의사의 의무는 (1) 수술 동의를 통해 자신에게 주어진 권한의 범위 내에서; (2) 계약 조건에 따라; (3) 수술의 필요성/진행과 관련된 모든 사실을 완전하게 공개하고, (4) 자신의 모든 역량을 발휘하면서 수술에 임하는 것이다.

  • PDF

조직의 정보 니즈와 ERP 기능과의 불일치 및 그 대응책에 대한 이해: 조직 메모리 이론을 바탕으로 (Understanding the Mismatch between ERP and Organizational Information Needs and Its Responses: A Study based on Organizational Memory Theory)

  • 정승렬;배억호
    • Asia pacific journal of information systems
    • /
    • 제22권2호
    • /
    • pp.21-38
    • /
    • 2012
  • Until recently, successful implementation of ERP systems has been a popular topic among ERP researchers, who have attempted to identify its various contributing factors. None of these efforts, however, explicitly recognize the need to identify disparities that can exist between organizational information requirements and ERP systems. Since ERP systems are in fact "packages" -that is, software programs developed by independent software vendors for sale to organizations that use them-they are designed to meet the general needs of numerous organizations, rather than the unique needs of a particular organization, as is the case with custom-developed software. By adopting standard packages, organizations can substantially reduce many of the potential implementation risks commonly associated with custom-developed software. However, it is also true that the nature of the package itself could be a risk factor as the features and functions of the ERP systems may not completely comply with a particular organization's informational requirements. In this study, based on the organizational memory mismatch perspective that was derived from organizational memory theory and cognitive dissonance theory, we define the nature of disparities, which we call "mismatches," and propose that the mismatch between organizational information requirements and ERP systems is one of the primary determinants in the successful implementation of ERP systems. Furthermore, we suggest that customization efforts as a coping strategy for mismatches can play a significant role in increasing the possibilities of success. In order to examine the contention we propose in this study, we employed a survey-based field study of ERP project team members, resulting in a total of 77 responses. The results of this study show that, as anticipated from the organizational memory mismatch perspective, the mismatch between organizational information requirements and ERP systems makes a significantly negative impact on the implementation success of ERP systems. This finding confirms our hypothesis that the more mismatch there is, the more difficult successful ERP implementation is, and thus requires more attention to be drawn to mismatch as a major failure source in ERP implementation. This study also found that as a coping strategy on mismatch, the effects of customization are significant. In other words, utilizing the appropriate customization method could lead to the implementation success of ERP systems. This is somewhat interesting because it runs counter to the argument of some literature and ERP vendors that minimized customization (or even the lack thereof) is required for successful ERP implementation. In many ERP projects, there is a tendency among ERP developers to adopt default ERP functions without any customization, adhering to the slogan of "the introduction of best practices." However, this study asserts that we cannot expect successful implementation if we don't attempt to customize ERP systems when mismatches exist. For a more detailed analysis, we identified three types of mismatches-Non-ERP, Non-Procedure, and Hybrid. Among these, only Non-ERP mismatches (a situation in which ERP systems cannot support the existing information needs that are currently fulfilled) were found to have a direct influence on the implementation of ERP systems. Neither Non-Procedure nor Hybrid mismatches were found to have significant impact in the ERP context. These findings provide meaningful insights since they could serve as the basis for discussing how the ERP implementation process should be defined and what activities should be included in the implementation process. They show that ERP developers may not want to include organizational (or business processes) changes in the implementation process, suggesting that doing so could lead to failed implementation. And in fact, this suggestion eventually turned out to be true when we found that the application of process customization led to higher possibilities of failure. From these discussions, we are convinced that Non-ERP is the only type of mismatch we need to focus on during the implementation process, implying that organizational changes must be made before, rather than during, the implementation process. Finally, this study found that among the various customization approaches, bolt-on development methods in particular seemed to have significantly positive effects. Interestingly again, this finding is not in the same line of thought as that of the vendors in the ERP industry. The vendors' recommendations are to apply as many best practices as possible, thereby resulting in the minimization of customization and utilization of bolt-on development methods. They particularly advise against changing the source code and rather recommend employing, when necessary, the method of programming additional software code using the computer language of the vendor. As previously stated, however, our study found active customization, especially bolt-on development methods, to have positive effects on ERP, and found source code changes in particular to have the most significant effects. Moreover, our study found programming additional software to be ineffective, suggesting there is much difference between ERP developers and vendors in viewpoints and strategies toward ERP customization. In summary, mismatches are inherent in the ERP implementation context and play an important role in determining its success. Considering the significance of mismatches, this study proposes a new model for successful ERP implementation, developed from the organizational memory mismatch perspective, and provides many insights by empirically confirming the model's usefulness.

  • PDF

석면 분석방법에 대한 고찰 (Review on asbestos analysis)

  • 함승헌;황성호;윤충식;박동욱
    • 한국산업보건학회지
    • /
    • 제19권3호
    • /
    • pp.213-232
    • /
    • 2009
  • This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

IMO 2세대 선박 복원성 기준에 따른 서프라이딩/ 브로칭 취약성 기준 검증을 위한 계산 코드 개발 (Development of a Computation Code for the Verification of the Vulnerability Criteria for Surf-riding and Broaching Mode of IMO Second-Generation Intact Stability Criteria)

  • 신동민;오경근;문병영
    • 한국해양공학회지
    • /
    • 제33권6호
    • /
    • pp.518-525
    • /
    • 2019
  • Recently, the Sub-Committee on SDC (Ship Design and Construction) of IMO have discussed actively the technical issues associated with the second-generation intact stability criteria of ships. Generally, second generation intact stability criteria refer to vulnerability five modes ship stability which occurs when the ship navigating in rough seas. As waves passes the ship, dynamic roll motion phenomenon will affect ship stability that may lead to capsizing. Multi-tiered approach for second generation of intact stability criteria of IMO instruments covers apply for all ships. Each ship is checked for vulnerability to pure loss of stability, parametric roll, and broaching/surf-riding phenomena using L1(level 1) vulnerability criteria. If a possible vulnerability is detected, then the L2(level 2) criteria is used, followed by direct stability assessment, if necessary. In this study, we propose a new method to verify the criteria of the surf-riding/broaching mode of small ships. In case, L1 vulnerability criteria is not satisfied based on the relatively simple calculation using the Froude number, we presented the calculation code for the L2 criteria considering the hydrodynamics in waves to perform the more complicated calculation. Then the vulnerability criteria were reviewed based on the data for a given ship. The value of C, which is the probability of the vulnerability criteria for surf-riding/broaching, was calculated. The criteria value C is considered in new approach method using the Froude-Krylov force and the diffraction force. The result shows lower values when considering both the Froude-rylov force and the diffraction force than with only the Froude-Krylov force was considered. This difference means that when dynamic roll motion of ship, more exact wave force needs considered for second generation intact stability criteria This result will contribute to basic ship design process according to the IMO Second-Generation Intact Stability Criteria.

재즈 피아노의 즉흥연주 기법 연구 (A Study of Jazz Piano Techniques about Improvisation)

  • 사공미;조태선
    • 한국산학기술학회논문지
    • /
    • 제18권2호
    • /
    • pp.583-589
    • /
    • 2017
  • 1900년대 항구도시인 뉴올리언즈에는 다양한 민족과 인종들이 뒤섞여 대혼란을 이루고 있는 시기였다. 아프리카에서 끌려온 흑인노예들이 불렀던 노동요, 영가, 블루스와 영국 민요, 프랑스의 민속음악과 발레음악, 스페인의 춤곡, 군악대의 행진곡 등이 크레올의 래그타임(Rag Time)등과 뒤섞여 문화적인 다양성을 가지게 되었고 이러한 상황이 초기의 재즈로 발전하는 계기가 되었다. 20세기 역사상 가장 대중적이고 대중들의 사랑을 많이 받았던 스윙 재즈, 즉 비밥은 빅 밴드의 편곡 위주로 연주되던 스윙 재즈와는 달리 소규모 악기편성을 선호하였고 '즉흥연주'가 전면으로 나서게 된 재즈의 변형된 형태로 발전하게 되었다. 비밥의 빠르고 복잡한 코드진행에 반기를 들고 새로운 스타일을 개척한 쿨 재즈를 비롯해 20년 전의 비밥보다 훨씬 더 강도 높게 재즈의 전통으로 부터 근본적인 단절을 꾀한 양식으로 받아들여진 프리 재즈가 탄생하게 된다. 재즈의 역사의 중심에 있었던 마일스 데이비스가 재즈에 록(Rock) 비트를 도입하면서 시작된 퓨전 재즈 등으로 발전되었다. 이렇게 시대별로 각기 다른 이름으로 발전해온 재즈의 매력은 '즉흥연주'에 있다고 볼 수 있다. 시대별로 코드 진행과 스케일, 리듬 등에 약간의 스타일적인 변화가 있었지만 결국 21세기를 살고 있는 지금의 연주자들도 재즈의 연주에서 제일 중요하게 생각하는 것은 다름 아닌 '즉흥연주'이다. 같은 시대에 살면서 음악활동을 했던 유명 연주자들도 그 시대의 전체적인 분위기를 따라 가면서 각기 다른 자신만의 연주 스타일을 가지고 있었다. 그렇기 때문에 똑같은 곡을 연주해도 헤드는 비슷하게 연주 하지만 솔로 부분에서는 각기 다른 자기만의 즉흥연주 스타일을 표현하게 되는 것이다.

IMO 회원국 감사제도 대응을 위한 해기교육 강화방안에 관한 연구 (A Study on the Enhancement of Maritime Education and Training to cope with IMO Member-state Audit Scheme)

  • 이윤철;박성호
    • 한국항해항만학회지
    • /
    • 제37권2호
    • /
    • pp.203-210
    • /
    • 2013
  • 그 동안 각종 IMO 협약의 채택에도 불구하고 인명 및 해양환경에 관련된 대형 선박사고가 발생하는 것은 기국이 의무를 충실히 이행하고 있지 않고 이로 인하여 IMO 협약들이 효과적으로 이행되지 않기 때문이다. 특히, 기국 중 해당 선박과 기국 간에 진정한 연계가 없는 기국에서는 자국 내 해사안전 및 환경보호를 담당할 인적, 구조적 조직이 잘 정비되어 있지 않기 때문에 협약의 이행이 제대로 이루어 지지 않고 있다. 이와 같은 배경으로 IMO에서는 2003년 11월 제23차 총회에서 자발적 회원국 감사제도에 관한 결의서 A.946(23)이 채택되었고, 동 제도는 2009년 11월 총회 결의서 A.1018(26)의 채택으로 2015년에 강제화 될 예정이다. 따라서 이 연구에서는 IMO 회원국 감사제도의 개요와 동 제도의 감사기준으로 사용하고 있는 강제협약 이행코드를 살펴보았다. 또한 2015년 회원국 감사제도의 강제화에 따른 당사국의 의무와 책임에 대해 검토하였다. 이를 중심으로 우리나라의 해기교육기관이 회원국 감사제도의 강제화에 선제적으로 대응하기 위한 해기 교육 강화방안을 제안하였다.

Modeling and analysis of selected organization for economic cooperation and development PKL-3 station blackout experiments using TRACE

  • Mukin, Roman;Clifford, Ivor;Zerkak, Omar;Ferroukhi, Hakim
    • Nuclear Engineering and Technology
    • /
    • 제50권3호
    • /
    • pp.356-367
    • /
    • 2018
  • A series of tests dedicated to station blackout (SBO) accident scenarios have been recently performed at the $Prim{\ddot{a}}rkreislauf-Versuchsanlage$ (primary coolant loop test facility; PKL) facility in the framework of the OECD/NEA PKL-3 project. These investigations address current safety issues related to beyond design basis accident transients with significant core heat up. This work presents a detailed analysis using the best estimate thermal-hydraulic code TRACE (v5.0 Patch4) of different SBO scenarios conducted at the PKL facility; failures of high- and low-pressure safety injection systems together with steam generator (SG) feedwater supply are considered, thus calling for adequate accident management actions and timely implementation of alternative emergency cooling procedures to prevent core meltdown. The presented analysis evaluates the capability of the applied TRACE model of the PKL facility to correctly capture the sequences of events in the different SBO scenarios, namely the SBO tests H2.1, H2.2 run 1 and H2.2 run 2, including symmetric or asymmetric secondary side depressurization, primary side depressurization, accumulator (ACC) injection in the cold legs and secondary side feeding with mobile pump and/or primary side emergency core coolant injection from the fuel pool cooling pump. This study is focused specifically on the prediction of the core exit temperature, which drives the execution of the most relevant accident management actions. This work presents, in particular, the key improvements made to the TRACE model that helped to improve the code predictions, including the modeling of dynamical heat losses, the nodalization of SGs' heat exchanger tubes and the ACCs. Another relevant aspect of this work is to evaluate how well the model simulations of the three different scenarios qualitatively and quantitatively capture the trends and results exhibited by the actual experiments. For instance, how the number of SGs considered for secondary side depressurization affects the heat transfer from primary side; how the discharge capacity of the pressurizer relief valve affects the dynamics of the transient; how ACC initial pressure and nitrogen release affect the grace time between ACC injection and subsequent core heat up; and how well the alternative feeding modes of the secondary and/or primary side with mobile injection pumps affect core quenching and ensure stable long-term core cooling under controlled boiling conditions.