• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.299-299
• /
• 2011

A dipolar interlayer can cause dramatic changes in the device characteristics of organic field-effect transistors (OFETs) or photovoltaics. A shift in the threshold voltage, for example, has been observed in an OFET where the organic semiconductor active layer is deposited on SiO2 modified with a dipolar monolayer. Dipolar molecules can similarly be used to change the current-voltage characteristics of organic-inorganic heterojunctions. We have conducted a series of experiments in which different molecular linkages are placed between a pentacene thin film and a silicon substrate. Interface modifications with different linkages allow us to predict and examine the nature of tunneling through pentacene on modified Si surfaces with different dipole moment. The molecular-scale structure and the tunneling properties of pentacene thin films on modified Si (001) with nitrobenzene and styrene were examined using scanning tunneling spectroscopy. Electronic interfaces using organic surface dipoles can be used to control the band lineups of a semiconductor at organic/inorganic interfaces. Our results can provide insights into the charge transport characteristics of organic thin films at electronic interfaces.

• ETRI Journal
• /
• 제25권6호
• /
• pp.517-522
• /
• 2003

This investigation confirms that silver stearate consists of an infinite-sheet, two-dimensional, nonmolecular layered structure. Scanning electron microscopy, X-ray diffraction, and infrared spectroscopy reveal the following: plate-like morphology is identified from the SEM image, XRD peaks can be indexed to the (0k0) reflections of a layered structure, and infrared peaks show that alkyl chains are present in an all-trans conformational state with little or no significant gauche population. Based on these structural characteristics, we demonstrate that silver stearate, a prototype of layered organic-inorganic hybrid material, can be grown not only in a designed two-dimensional pattern but also in three-dimensionally ordered ways by using carboxyl-group terminated nanoparticles as a template.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.98-107
• /
• 2016

Third-generation photovoltaics are of low cost based on solution processes and are targeting a high efficiency. To meet the commercial demand, however, significant improvements of both efficiency and stability are required. In this sense, interfacial engineering can be useful key to solve these issues because trap sites and interfacial energy barrier and/or chemical instability at organic/organic and organic/inorganic interfaces are critical factors of efficiency and stability degradation. Here, we thoroughly review the interfacial engineering strategies applicable to three representative third-generation photovoltaics - organic, perovskite, colloidal quantum dot solar cell devices.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.90-90
• /
• 2012

The electron/hole injections in organic electronic devices have long been an issue due to the large energy level mismatches between electrode and organic layer. To utilize the organic materials in electronic devices, functional thin layers have been used, which reduce the electron/hole injection barrier from electrode to organic material. Typically, inorganic compounds and organic molecules are used as an electron and hole injection layer, respectively. Recently, CsN3 and 1,4,5,8,- naphthalene-tetracarboxylic-dianhydride (NTCDA) are reported as a potential electron and hole injection layers. CsN3 shows unique properties that it breaks into Cs and N and thus Cs can dope organic layer into n-type. On the other side, hole injection anode, NTCDA forms gap states with anode material. In this presentation, we show the electronic structure changes upon the insertion of CsN3 and NTCDA at proper interfaces to reduce the charge injection barriers. These barrier reductions are correlated with device characteristics.

• 한국분말재료학회지
• /
• 제5권3호
• /
• pp.184-191
• /
• 1998

The fabrication process and properties of SiC particulate preforms with high volume fraction above 50% were investigated. The SiC particulate preforms were fabricated by vacuum-assisted extraction method after wet mixing of SiC particulates of 48 ${\mu}m$ in diameter, $SiO_2$ as inorganic binder, cationic starch as organic binder and polyacrylamide as dispersant in distilled water. The SiC particulate preforms were consolidated by vacuum-assisted extraction, and were followed by drying and calcination. The drying processes were consisted with natural drying at $25^{\circ}C$ for 36 hrs and forced drying at 10$0^{\circ}C$ for 12 hrs in order to prevent the micro-cracking of SiC particulates preform. The compressive strengths of SiC particulate preforms were dependent on the inorganic binder content, calcination temperature and calcination time. The compressive strength of SiC preform increased from 0.47 MPa to 1.79 MPa with increasing the inorganic binder content from 1% to 4% due to the increase of $SiO_2$ flocculant between the interfaces of SiC particulates. The compressive strength of SiC preform increased from 0.90 MPa to 3.21 MPa with increasing the calcination temperatures from 800 to 120$0^{\circ}C$ under identical calcination time of 4hrs. The compressive strength of SiC preform increased from 0.92 to 1.95 MPa with increasing the calcination time from 2 hrs to f hrs at calcination temperature of 110$0^{\circ}C$. The increase of compressive strength of SiC preform with increasing the calcination temperature and time is due to the formation of crystobalite $SiO_2$ phase at the interfaces of SiC particulates.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.68-69
• /
• 2011

The process of charge transfer at the interface between two semiconductors or between a metal and a semiconductor plays an important role in many areas of technology. The optimization of such devices requires a good theoretical description of the interfaces involved. This, in turn, has motivated detailed mechanistic studies of interfacial charge-transfer reactions at metal/organic, organic/organic, and organic/inorganic semiconductor heterojunctions. Charge recombination of photo-induced electron with redox species such as oxidized dyes or triiodide or cationic HTM (hole transporting materials) at the heterogeneous interface of $TiO_2$ is one of main loss factors in liquid junction DSSCs or solid-state DSSCs, respectively. Among the attempts to prevent recombination reactions such as insulating thin layer and lithium ions-doped hole transport materials and introduction of co-adsorbents, although co-adsorbents retard the recombination reactions as hydrophobic energy barriers, little attention has been focused on the anchoring processes. Molecular engineering of heterogeneous interfaces by employing several co-adsorbents with different properties altered the surface properties of $TiO_2$ electrodes, resulting to the improved power conversion efficiency and long-term stability of the DSSCs. In this talk, advantages of the coadsorbent-assisted sensitization of N719 in preparation of DSSCs will be discussed.

• 반도체디스플레이기술학회지
• /
• 제12권1호
• /
• pp.23-28
• /
• 2013

Epoxy resins are widely used in microelectronics packaging such as printed circuit board and encapsulating for semiconductor manufacturing. Water can diffuse into and through the epoxy matrix systems and moisture absorption at boarding interfaces of matrix resin systems can lead to a hydrolysis at the interfaces resulting in delamination of encapsulating materials. In the study, the changes of diffusion coefficient and moisture content ratio of epoxy resin systems with nano-sized fillers according to the change of liquid type epoxy resins were investigated. RE-304S, RE-310S, RE-810NM and HP-4032D as a epoxy resin, Kayahard AA as a hardener, and 1B2MI as a catalyst were used in these epoxy resin systems. After curing, moisture content ratios were measured with time under the 85 and 85% relative humidity condition using a thermo-hydrostat. The maximum moisture absorption ratio and diffusion coefficient of EMC decrease with the filler content. It can be seen that these decreases are due to the increase of filler surface area and the decrease of moisture through channel with the content of nano-sized filler.

• 진공이야기
• /
• 제2권2호
• /
• pp.4-11
• /
• 2015

본 글에서는 광전자 분광 및 역광전자 분광을 이용한 유기분자 시스템의 전자구조 연구에 대하여 기술하였다. 다양한 유기물간의 계면 연구가 급속도로 늘어나고 있으며, 폴리머, 거대 분자 등 기존의 in situ 분석 방법으로 실험이 어려운 물질까지도 연구의 필요성이 늘어나고 있다. Electrospray 증착 방법이 이러한 새로운 물질들의 계면 전자구조 연구를 가능하게 할 수 있음을 살펴보았으며, 다양한 새로운 분석 기법들의 출현을 기대해 본다. 몇 가지 예에서 살펴본 바와 같이 전자구조는 소자 구동 특성을 직접적으로 지배하는 핵심적인 물리량이며, 전자구조의 이해를 통해 전자소자의 구동 원리, 성능 최적화 및 소자 특성 열화의 원인을 파악할 수 있다. 현재, 유기물 소자 관련 기술의 성숙도는 전자구조 분석과 같은 기초 연구 결과 없이는 더 이상 발전할 수 없는 정도에 이르러, 관련 분석 기술에 대한 수요가 더욱 늘어날 것으로 전망된다.

• 농업과학연구
• /
• 제23권2호
• /
• pp.250-260
• /
• 1996

Observed results of the adsorption between two competing anions for the shared sorption sites represent that the adsorption phenomena may depends on the characteristics of anion and available sorption sites in a given conditions. In binary systems, adsorption of one species can significantly influence the fate of the other anion, resulting in control of the extent of solute-adsorbate distributions throughout soil profile. And the proton-donation mechanisms by organic anions having a carboxyl as a functional group can also influence the adsorption of inorganic anions onto the hydroxylated sites of Fe and Al oxides. However, study of competitive adsorption of specifically adsorbed anions illustrates some of difficulties which arise in interpretation of reactions at oxide/aqueous solution interfaces. At least two factors prevented a simple analysis of reactions. First, at any pH value the maximum amount of adsorbate taken up at the surface depends on the identity of the anion. Second, it was necessary to postulate the sorption sites where the anion can be adsorbed. Hence, anions having non-specific adsorption characteristics are less capable for sorption sites, compared to those of specific adsorption characteristics, even though competition complies both ordinary and electrostatic interactions for sorption sites. Therefore, competition among chemical species in soil matrix can be of major significance in determining the effective mobility of any reactive anions with sorption sites.

• 전기화학회지
• /
• 제22권3호
• /
• pp.87-103
• /
• 2019

현재 상용화되어 있는 리튬이온전지에 사용하고 있는 비수계 유기 전해액은 가연성, 부식성, 고휘발성, 열적 불안정성 등의 단점 때문에 더욱 안전하고 장수명을 보이는 고체 전해질로 대체하는 연구가 진행되고 있으며, 이것은 전기자동차 및 에너지저장 시스템과 같은 중대형 이차전지에도 효율적으로 활용될 수 있다. 다양한 형태의 고체 전해질 중에서 현재 고분자 매트릭스에 활성 무기 충진재가 포함되어 있는 복합 고체 전해질이 고이온전도도와 전극과의 탁월한 계면접촉을 이루는데 가장 유리한 것으로 알려졌다. 본 총설에서는 우선 고체 전해질의 종류와 연혁에 관해 간단히 소개하고, 고분자 및 무기 충진재 (불활성 및 활성)로 구성되는 고체 고분자 전해질 및 무기 고체 전해질의 기본적 물성 및 전기화학적 특성을 개괄한다. 또한 이 소재들의 형상을 기준으로 입자형 (0D), 섬유형 (1D), 평판형 (2D), 입체형 (3D)의 형식으로 구성된 복합고체 전해질과 이에 따른 전고체 전지의 전기화학적 특성을 논의한다. 특히 리튬금속 음전극을 사용하는 전고체 전지에 있어서 양전극-전해질 계면, 음전극-전해질 계면, 입자간 계면의 특성에 관해 소개하고, 마지막으로 현재까지 보고된 관련 총설들을 참조하여 복합 고체 전해질 기술의 현재 요구조건 및 미래 전망을 알아본다.