• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.446-450
• /
• 2007

It is strongly expected that inkjet printing method will be play and important role on printable electronics such as 3D integration of embedded ceramic devices(capacitor, resistor, inductor and electrode or circuit), Si-TFT and organic TFT including display C/F, RFID, FPCB, and etc. A inkjet printing method had been center of attention to strengthen the competitiveness of flat panel display on market and to open the new world of manufacturing process of printable electronics. We will survey the industrial tendency of printable electronics and flat panel display including some examples of inkjet printing and present the considerable points of inkjet printing method and some role of materials for successful inkjet printing.

• 한국철도학회논문집
• /
• 제10권2호
• /
• pp.124-130
• /
• 2007

The emphasis of this paper is to find out the changes in length of nose in line with speed improvement and changes of the tendency in the shape of the nose in line with time series based on the Shinkansen vehicle. The length of the nose on the lines of high speed tends to get longer, however there is no proportion between the speed and the nose according to optimal design that was designed to reduce micro-pressure wave and air resistance. The Shinkansen vehicles, according to the shape, can be classified in to an Advanced Paraboloid shape, a Sharp-nosed shape, a Flat-nosed shape and an Organic Double-edged shape and is gradually changing in the trend of diversity and distinction. Hereafter, the design of the nose will be developed better into the design that will comprehend identity of manufacturer, region and culture on the basis of optimized aerodynamic shape.

• 접착 및 계면
• /
• 제8권1호
• /
• pp.28-33
• /
• 2007

It is a main trend not to use organic solvents in the adhesive industry from the recent environmental and safe points of view. For example, water-based, hot-melt, or UV curable adhesives are being investigated. Several different kinds of tackifiers that are formulated in the adhesives in order to give them more functional properties like initial tack and higher adhesion, etc., have been proposed to meet the recent trend. Firstly, the characteristics and fundamental properties of the respective materials are presented. In Japan, the trend to develop the water-based adhesives is most remarkable. While the environmental regulations are getting harder, Arakawa Chemical has been spending a lot of energy for the research, and developed toluene-free and solvent free tackifier dispersions that are presented precisely.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.127-140
• /
• 2014

Laminated rubber bearing is very popular base isolation of earthquake engineering pertaining to the passive structural vibration control technologies. Rubber used in fabricating NRB and LRB can be easily attacked by various environmental factors such as oxygen, heat, light, dynamic strain, and organic liquids. Among these factors, this study carried out thermal aging test to investigate the effect of thermal aging on the mechanical properties of laminated rubber bearings in accelerated exposure condition of $70^{\circ}C$ temperature for 168 hours. The compressive-shear test was carried out to identify the variation of compressive and shear properties of the rubber bearings before and after thermal aging. In contrast to tensile strength and elongation tests, the hardness of rubber materials showed the increasing tendency dependent on exposure temperature and period. Based on the test results, the property changes of rubber bearing mainly aged by heat are quantitatively presented.

• 한국환경보건학회지
• /
• 제18권2호
• /
• pp.62-66
• /
• 1992

This study was performed to investigate the characteristics of livestock wastewater excepting pig feces and the variation tendency of water quality and the removal efficiency of polluting materials by establishing the sequencing batch reactor in the field.The results were as follows, 1. The characteristics of livestock wastewater as follows: BOD: 619.80, COD$_{cr}$: 782.70, NH$_{3}$-N: 194.20, TKN: 232.81, PO$_{4}$-P: 24.10, T-P: 215.14 (mg/l) 2. During the reaction, negative correlation existed between pH and dissolved oxygen concentration. 3. The removal efficiency of the organic material by the index of BOD and COD was about 90%. 4. Nitrogen removal efficiency was 65.6% by total Kjeldahl nitrogen index, and phosphorous removal efficiency was about 47% by PO$_{4}$-P concentration.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.28-29
• /
• 2017

Recently, the tendency of the insulation of buildings to be important is making the buildings airtight. However, in order to get closer to the technology, it is necessary to improve the performance of walls and panels of buildings, but it is a problem due to the increase of the unit price. We will review the basic data on the density and table flow characteristics of high thermal insulation materials.

• Journal of Korean Society for Atmospheric Environment
• /
• 제21권E2호
• /
• pp.57-65
• /
• 2005

An experimental study was performed on the decomposition of gaseous ammonia and two selected volatile organic compounds (VOCs: toluene and acetone) in a combined nonthermal plasma reactor with corona and glow discharges. A lab pilot scale reactor (206 liter) equipped with a high electric power pack was used to determine the decomposition efficiency in relation with the inlet concentration and applied voltage. Three different types of discharging electrode such as wired rack, wire strings for corona discharge, and thin plate for glow discharge were put in order in the reactor. While decomposition of ammonia decreased with an increase in the initial concentration, acetone showed an opposite result. In the case of toluene however no explicit tendency was found in toluene and aceton. Negative discharge resulted in high decomposition efficiency than the positive one for all gases. A better removal of gas phase element could be achieved when fume dust were present simultaneously.

• 한국가구학회지
• /
• 제12권1호
• /
• pp.131-142
• /
• 2001

Cultural needs of human have grown enormously. Consumer trend and individual taste have become more individualistic and diversified. Efforts to improve the quality of life have changed the concept of lift space as well as the concept of interior life supplies. Products are no longer standardized and produced in massive scale, thus a shift of value has risen. Damages done by the economical development have made consumers take interests in products that are more natural and in harmony with human beings. It is a tendency that wooden materials are becoming a preference as a specific alternative. There is a great social change with a new paradigm like this. Considering the change, we propose a new vision and activation plan on design development of wooden products through specific and practical studies by the system of educational and industrial cooperation which is an organic association system for developing human resources of educational system and producing profits of industry. From it, we can expect great effects as a competitive design of coming future.

• Environmental Analysis Health and Toxicology
• /
• 제13권3_4호
• /
• pp.77-85
• /
• 1998

It is very frequent that LAS meets the chlorine bleaches not only in the processes but also in the path from the sewages to the rivers. Therefore, it is not difficult to imagine that the harmful substances like DBPs are produced when LAs reacts with free chlorine. THMs are the major components of DBPs which are formed by reactions of organic substances with the chlorine oxidants. Among them, chloroform is the most noteworthy material. Since the major behavior observed was the formation of chloroform during reaction of LAS with free chlorine, the models were developed to grasp the tendency of chloroform formation depending on condition. According to these models, the effect of pH in the formation of chloroform is most grave.

• 한국실내디자인학회논문집
• /
• 제15권2호
• /
• pp.56-64
• /
• 2006

From ancient times to today the formation of centrality in architecture has taken very important role as an organizing device. However after 19th century modem architecture focused on the universal aspect and homogeneity of space, and developed its own vocabulary through de-centralization. Since 1960's the reflections on de-humanized space of modem space have been evloved. As those movement has been understood seriously, the centrality can be changed to phenomenological one. And The phenomenological centrality maintains organic balance with its surroundings not trying to form a hierarchic system. So it shows human-oriented tendency and facilitates experiential movements of human body. And it also gives a sense of being. The phenomenological centrality is comprised of center, boundary, and two types of axis. The characteristics of phenomenological centrality can be analyzed as practical and meaningful center, visible boundary, experiential movement, and unexpectable encounters with spaces and nature.