• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1757-1762
• /
• 2006

A solvent sublation using salphen as a ligand was studied and applied for the determination of trace Ni(II), Co(II) and Cu(II) in water samples. The fundamental study was investigated by a solvent extraction process because the solvent sublation was done by extracting the floated analytes into an organic solvent from the aqueous solution. The salphen complexes of Ni(II), Co(II) and Cu(II) ions were formed in an alkaline solution of more than pH 8 and then they were extracted into m-xylene. It was known that the each metallic ion formed 1 : 1 complex with the salphen and the logarithmic values of extraction constants for the complexes were 3.3 5.1 as an average value. Based on the preliminary study, the procedure was fixed for the separation and concentration of the analytes in samples. Various conditions such as the pH of solutions, the influence of $NaClO_4$, the bubbling rate and time of $N_2$ gas, and the type of organic solvent were optimized. The metal-salphen complexes could be extracted into m-xylene from the solution of more than pH 8, but the pH could be shifted to acidic solution of pH 6 by the addition of $NaClO_4$. In addition, the solvent sublation efficiency of the analytes was increased by adding $NaClO_4$. The recovery of 97-115% was obtained in the spiked samples in which given amounts of 0.3 mg/L Ni(II), 0.8 mg/L Co(II) and 0.04 mg/L Cu(II) were added.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.197-200
• /
• 2001

Lectin-conjugated ellagitannin (LET), a newly introduced melanoma-specific antitumor agent which has been synthesized by conjugation of wheat germ agglutinin as a lectin with praecoxin A as an ellagitannin, was encapsulated into sterically stabilized liposomes (SSL). Modified Folin phenol method was established for the quantitation of LET contents in liposomal formulations protein employing the standard calibration curve with bovine serum albumin. After removal of phospholipid by organic solvent extraction, which interferes the specific selectivity of the Folin-Ciocalteu reagent with the protein, recovery of LET was $94.5{\pm}2.3%$ and the encapsulation efficiency was revealed as $37.8{\pm}5.9%$ for 2.5 mg/ml LET solution.

• Food Science of Animal Resources
• /
• v.37 no.1
• /
• pp.29-37
• /
• 2017

Defatted bovine liver (DBL) is a potential source of protein and minerals. Supercritical carbon dioxide ($SC-CO_2$) and a traditional organic solvent method were used to remove lipid from bovine liver, and the quality characteristics of a control bovine liver (CBL), bovine liver defatted by $SC-CO_2$ ($DBLSC-CO_2$) at different pressures, and bovine liver defatted by organic solvent (DBL-OS) were compared. The $DBLSC-CO_2$ samples had significantly higher (p<0.05) protein, amino acid, carbohydrate, and fiber contents than CBL and DBL-OS. There was a higher yield of lipid from CBL when using $SC-CO_2$ than the organic solvent method. SDS-PAGE analysis demonstrated that the CBL and $DBLSC-CO_2$ had protein bands of a similar intensity and area, whereas DBL-OS appeared extremely poor bands or no bands due to the degradation of proteins, particularly in the 50 to 75 kDa and 20 to 25 kDa molecular weight ranges. In addition, $DBLSC-CO_2$ was shown to have superior functional properties in terms of total soluble content, water and oil absorption, and foaming and emulsification properties. Therefore, $SC-CO_2$ treatment offers a nutritionally and environmentally friendly approach for the removal of lipid from high protein food sources. In addition, $SC-CO_2$ may be a better substitute of traditional organic solvent extraction for producing more stable and high quality foods with high-protein, fat-free, and low calorie contents.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.447-455
• /
• 2013

Hemicellulose extract obtained by pre-pulping extraction of woodchips, is very diluted acidic in nature. The major component responsible for this weak acidity is acetic acid, present in levels up to 5~10 g/L. Here, we report an exploratory study on the extract upgrading by reactive solvent extraction of acetic acid as well as ASPEN simulation. In this study, liquid-liquid equilibria for the ternary systems (water + acetic acid + ethyl acetate) were measured at the temperature of 298.15 K and 10 (pH = 2.02), 5 (pH = 2.17), and 1 (pH = 2.48) percent of acetic acid samples were used to carry out liquid-liquid extraction studies using ethyl acetate. In a one-stage batch experiment, 96.0% of acetic acid could be extracted for the solvent when the ratio of organic-to-aqueous phases is 4:1. For simulation results, they were used to estimate the interaction parameters between each of the three compounds of the systems studied for the NRTL and UNIQUAC models. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the two models.

• Korean Journal of Metals and Materials
• /
• v.48 no.10
• /
• pp.929-935
• /
• 2010

The solvent extraction behavior of Sn(IV) from hydrochloric acid was investigated using Alamine336 (Tri-n-cotylamine) as an extractant. The experimental parameters of the concentration of the HCl solution, chloride ions, extractant, and Sn(IV) were assessed. The results showed that the extraction percentage of Sn(IV) was more than 95% in our experimental range and was only slightly affected by the HCl concentration. The extraction reaction of Sn(IV) by Alamine 336 from the chloride solution was identified as follows: $SnCl_6{^{2-}}+2R_3NHCl_{(org)}=(R_3NH)_2SnCl_{6(org)}+2Cl^-$ and $K=6.3{\times}10^4$. Stripping experiments of Sn(IV) from the loaded organic phase were done by using several stripping agents. A stripping percentage of 90% was obtained with a 2.0 M NaOH solution.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.456-461
• /
• 2001

To develop the use of natural pigment for food, carotenoids from wasted persimmon peel were extracted with seven organic solvents. Among the solvents, acetone was a high yielding solvent of carotenoids. Extraction trends depending on process variables(temperature, time, solvent ratio to persimmon peel) were explained through response surface which was made by central composite experimental design. Carotenoid contents were increased with the extraction time and solvent ratio but it decreaed in the higher experimental design. Carotenoid contents were increased with the extraction time and solvent ratio but it decreased in the higher extraction temperature. The optimum conditions of extraction process variables were predicted as 29$\^{C}$, 93min. at fixed solvent ratio(1:27).

• Journal of Microbiology and Biotechnology
• /
• v.11 no.4
• /
• pp.712-715
• /
• 2001

A new combined method including the enzymatic hydrolysis of $\beta$-cyclodextrin ($\beta$-CD) and solvent extraction fo cholesterol from the hydrolyzed mixture was developed to recover cholesterol from a $\beta$-CD-cholesterol complex prepared from dairy products, such as cream, milk, and cheese. Cyclomaltodextrinase (cyclomatodextrin dextrin hydrolase, EC 3.2.1.54, DCase_ prepared form alkalophilic Bacillus sp. KJ 133 hydrolyzed the $\beta$-DC of the $\beta$-CD-cholesterol complex, and then, free cholesterol was efficiently extracted from the hydrolyzed mixture by a nonpolar solvent such as ethyl acetate. To increase the stability of free CDase, immobilized CDase was developed using sodium alginate as a carrier. The immobilized CDase showed a high recovery yield of cholesterol in a time-dependent manner compared to the free CDase. A gas chromatography analysis showed that more than 70% of cholesterol was recovered from the $\beta$-DC-cholesterol complex of cream by the immobilized CDase, whereas only 3% and 29% of cholesterol were recovered when the solvent extraction and free CDase treatment were used, respectively. The cholesterol recovered can be used as a raw material for steroid synthesis. Furthermore, this method can be an efficient way to recover cholesterol or other organic compounds that are bound in a $\beta$ -DC-cholesterol or -organic compound complex.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.13-18
• /
• 2008

For the evaluation of brominated flame retardants included in polymeric electronic devices, we investigated the extraction methods and solvent systems for four different types of polymers of PC (polycarbonate), PP (polyropylene), PET (poly(ethylene terephthalate)) and PBT (poly(butylene terephthalate)) using different solvent systems of hexane/acetone, THF, toluene, and THF/toluene. In order to compare the extraction efficiency of different methods and solvent systems, the deca-BDE (decabromo diphenyl ether) flame retardant was included in PC, PP, PET and PBT systems and subsequently extracted by soxhlet, ultrasonic, accelerated solvent, microwave and supercritical fluid extraction methods. The amount of the extracted flame retardant was monitored to evaluate the extraction efficiency. The ultrasonic extraction method was found not to be acceptable as an extraction method for the polymer systems mainly due to a low salvation efficiency of the organic solvents. Soxhlet, accelerated solvent and microwave extraction methods exhibited over 80% of extraction efficiency for toluene. The supercritical fluid extraction method, which has been used as an extraction method for flame retardants in polymers, showed the extraction efficiencies of ca. 100% for PC and PP in the optimal extraction conditions of $60^{\circ}C$ and 120 bar.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.112-115
• /
• 2002

The green colonial algae Botryococcus braunii is characterized by unusual high hydrocarbon contents, ranging from 15 to 75% of dry weight, as long-chain unsaturated hydrocarbons. In two-phase bubble column using various organic solvents, poor recovery 08 - 32%) of hydrocarbon seems to be caused by insufficient mixing between two phases, which was operated using only aeration on the narrow interface between hydrophobic solvent and cell suspension. In addition, hydrocarbon was entrapped tightly in cell-matrix (formed by exopolysaccharide) of algal colony, which make difficult to extract using two-phase system. To improve recovery efficiency, mixed-solvent of extractive solvent (octane) and biocompatible solvent (octane) was tested in two-phase column for in situ extraction. In two-phase extraction culture using mixed-solvent, the algal growth was intensely inhibited even at low concentration of polar octanol solvent. the hydrocarbon recovery in two-stage cell-recycle extraction showed a 2.9 fold increase (57%) over that in two-phase extraction. Up to 60 % of hydrocarbon could be recovered without serious cell-damage in the case of downstream separation for 6 h at the high recycle flow rate using this process after batch culture.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.695-702
• /
• 2015

Liquid-liquid extraction (LLE) using various solvents was studied for recovery of acetic acid from a synthetic ethanol fermentation broth. The microbial fermentation of sugars presented in hydrolyzate gives rise to acetic acid as a byproduct. In order to obtain pure ethanol for use as a biofuel, fermentation broth should be subjected to acetic acid removal step and the recovered acetic acid can be put to industrial use. Herein, batch LLE experiments were carried out at $25^{\circ}C$ using a synthetic fermentation broth comprising $20.0g\;l^{-1}$ acetic acid and $5.0g\;l^{-1}$ ethanol. Ethyl acetate (EtOAc), tri-n-octylphosphine oxide (TOPO), tri-n-octylamine (TOA), and tri-n-alkylphosphine oxide (TAPO) were utilized as solvents, and the extraction potential of each solvent was evaluated by varying the organic phase-to-aqueous phase ratios as 0.2, 0.5, 1.0, 2.0, and 4.0. The highest acetic acid extraction yield was achieved with TAPO; however, the lowest ethanol-to-acetic acid extraction ratio was obtained using TOPO. In a single-stage batch extraction, 97.0 % and 92.4 % of acetic acid could be extracted using TAPO and TOPO when the ratio of organic-to-aqueous phases is 4:1 respectively. A higher solvent-to-feed ratio resulted in an increase in the ethanol-to-acetic acid ratio, which decreased both acetic acid purity and acetic acid extraction yield.