• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.48-53
• /
• 2011

Polymer thin films were prepared by capacitively coupled plasma polymerization process for application of gate insulator. The polymer thin films revealed to form polymer layers with original properties of the monomer. Among the plasma polymer thin films, the styrene polymer having large number of phenyl sites revealed higher dielectric constant of k=3.7 than that of conventional polymer. The plasma polymerized styrene thin film revealed no hysteresis characteristics and low leakage current density of $1{\times}10^{-8}[Acm^{-2}]$ at field strength of $1[MVcm^{-1}]$, which measured by I-V and C-V measurements using MIM and MIS devices.

• Advances in materials Research
• /
• 제3권2호
• /
• pp.117-128
• /
• 2014

Processable conducting polyaniline derivative with free amine functional groups was successfully synthesized from the monomer o-phenylenediamine in aqueous hydrochloric acid medium using ammonium persulfate as an oxidative initiator. The synthesized poly(o-phenylenediamine) (PoPD) in critical condition was found to be completely soluble in common organic solvents like dimethyl sulfoxide, N,N-dimethyl formamide etc. From the intrinsic viscosity measurement, the optimum condition for the polymerization was established. The polymer was characterized by ultraviolet visible spectroscopy, Fourier transform infrared spectroscopy, proton magnetic resonance spectroscopy ($^1HNMR$) and thermogravimetric (TGA) analyses. The weight average molecular weights of the synthesized polymers were determined by the dynamic light scattering (DLS) method. From the spectroscopic analysis the structure was found to resemble that of polyaniline derivative with free amine functional groups attached to ortho/meta position in the phenyl ring. However, very little ladder unit was also present with in the polymer chain. The moderate thermal stability of the synthesized polymer could be found from the TGA analysis. The average DC conductivity of $2.8{\times}10^{-4}S/cm$ was observed for the synthesized polymer pellet after doping with hydrochloric acid.

• Macromolecular Research
• /
• 제13권2호
• /
• pp.141-146
• /
• 2005

Calix[4]crown-6-2,4-bis(4-aminobutyl ether), which has a crown-6 moiety at the 1,3-position and amino function at the 2,4-position, was prepared as an intermediate for the subsequent synthesis of calix[4]crown-6-containing polyamide and polyimide using adipoyl chloride and 1,2,4,5-benzenetetracarboxylic dianhydride. The chemical structures were characterized by IR, $^{1}H NMR$ spectroscopy and elemental analysis, and some of their physical properties, including their thermal behavior, were examined. The ion binding characteristics of the monomer and polymers for alkali metal and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. It has been observed that polyamide has a high binding ability towards various metal cations as compared to polyimide, which showed cesium ion selectivity.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.112-112
• /
• 2006

Detailed surface characteristics of polymer films have been investigated by atomistic molecular dynamics simulations and NEXAFS spectroscopy experiments. The geometric confinement of the surfaces and the necessity to minimize the surface energy lead to the significant molecular organization and orientation in polymer surfaces, with their properties strongly depending upon the atomistic monomer structures. As compared with polymers, oligomeric electronic materials are much more readily aligned by employing various surface anchoring forces, rendering them highly attractive as polarized-light emitting materials and active semiconducting materials in thin film transistors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.28-32
• /
• 1993

A deposition rate of styrene thin films is linearly increased, but one of benzene thin films is nonlinearly increased with increasing discharge power under maintaining a polymerization time, pressure and monomer flow rate. And, the reduction of transmittance at shortwave is larger than that of transmittance at longwave. The refractive index with wavelength is various from 1.55 to 1.65. The refractive index of their thin films is decreased with increasing discharge power. Also, it is known that measured results are valid because the calculation of the extinction coefficient is about $10^3$ within variation of refractive index.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.52-55
• /
• 2006

The OLEDs(Organic Light-Emitting Diodes) structure organizes the bottom layer using glass, ITO(indium thin oxide), hole injection layer, hole transport layer, emitting material layer, electron transport layer, electron injection layer and cathode using metal. OLED has various advantages. OLEDs research has been divided into structural side and emitting material side. The amount of emitting light and luminescence efficiency has been improved by continuing effort for emitting material layer. The emitting light mechanism of OLEDs consists of electrons and holes injected from cathode and anode recombination in emitting material layer. The mobilities of injected electrons and holes are different. The mobility of holes is faster than that of electrons. In order to get high luminescence efficiency by recombine electrons and holes, the balance of their mobility must be set. The more complex thin film structure of OLED becomes, the more understanding about physical phenomenon in each interface is needed. This paper observed what the thickness change of hole transport layer has an affection through the below experiments. Moreover, this paper uses numerical analysis about carrier transport layer thickness change on the basis of these experimental results that agree with simulation results.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.450-455
• /
• 2007

LCD color filters have been manufactured in a process called photolithography to date, but various printing methods have been studied currently in response to the trend of low-end LCD panels. Direct Printing Process is a suitable fabrication technique to develope pigment components whose dimensions are in nano. The success of this process depends on the systematic preparation of pigment millbase. Conventional millbase dispersions are constituted of the organic pigments, monomer, dispersant and solvents. An experimental study on the rheology of millbase dispersions is presented. Subsequently, this thesis attempts to find out the dispersive characteristics as well as the selection of pigments, monomers and dispersants in the part of millbase among the stages of manufacturing LCD color filters using the direct printing methods. The dispersive characteristics were shown through analytic devices such as PSA, Rheometer, etc.

• Macromolecular Research
• /
• 제10권5호
• /
• pp.273-277
• /
• 2002

Ultra-thin polymer films containing cobalt(II) meso-tetraphenylporphyrin(CoTPP) have been prepared by vacuum codeposition of the metal complex and trans-2-butene as an organic monomer using an inductively coupled RF glow discharge operating at 7-9 Watts. The polymer films were characterized by sorption measurements. Sorption data obtained for polymer films containing CoTPP indicate that the CoTPP molecules are capable of reversibly binding oxygen molecules. It was found that the adjacent CoTPP molecules in the aggregated metal complex phase could irreversibly share the oxygen molecules. A dispersion of the metal complex molecules in the polymer matrix was made to maintain the reversible reactivity of the metal complex molecules with oxygen in the polymer films via vacuum evaporation process. The Henry mode solubility constant, the Langmuir mode capacity constant, the amount of binding oxygen, and the dissociation equilibrium in the dual mode sorption theory were discussed.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.404-409
• /
• 2008

The core-shell composite particles of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate (KPS) as an initiator. We studied the effect of core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alky lether sulfate (EU-S133D). We found that when $SiO_2$ core/PSt shell polymerization was prepared on the surface $SiO_2$ particle, to minimize the coagulation during the shell polymerization, the optimum conditions were at concentration of $2.56{\times}10^{-2}mole/L$ SLS. The structure of core-shell polymer was confirmed by measuring the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of core-shell polymer particles by transmission electron microscope (TEM).

• Macromolecular Research
• /
• 제12권4호
• /
• pp.427-430
• /
• 2004

Calix[4]crown-6-2,4-bis(2-hydroxyethyl ether) (2), which has crown-6 moieties at the 1- and 3-positions and hydroxyethyl functions at the 2- and 4-positions, was prepared for the syntheses of polyester 3 and polyurethane 4 by reactions with adipoyl chloride and hexamethylene diisocyanate, respectively. The ion binding characteristics of monomer 2 and polymers 3 and 4 toward alkali and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. We observed that the polyurethane 4 has a higher binding affinity toward various metal cations when compared to polyester 3, which exhibits cesium ion selectivity.