• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.894-899
• /
• 2010

We coordinated the experiments with ozone pretreatment and two-phase anaerobic digestion using solid-liquid separation to raise the efficiency of sludge volume reduction and obtained the following results. The pre-treatment with ozone reduced the solid concentration in the average of TSS $8.3{\pm}2.0%$ TSS and $9.2{\pm}}2.8%$ VSS. Of the organic material, TCOD decreased $5.1{\pm}2.4%$, but SCOD showed $72{\pm}6.5%$ increased, which was due to destruction of the cell wall and dissolution of icell media by the powerful oxidative stress of ozone. During the two-phase anaerobic digestion process, we achieved the reduction of $21.5{\pm}3.4%$ TSS, $20.2{\pm}8.4%$ VSS, $32.1{\pm}7.9%$ TCOD and $22.1{\pm}7.2%$ SCOD in average. The maximum methane gas production were 177.6 mL per g TSS, 210.8 mL per g VSS, 127.0 mL per g TCOD and 1452.0 mL per g SCOD, respectively. Solid material reduction through the two-phase anaerobic digestion and MLE (Modified Ludzack-Ettinger) processes were 93.8% of TSS and 92.0% of VSS. We concluded that suggested two-phase anaerobic digestion and MLE process could achieve the reasonable production of biogas and a maximum reduction of the sludge volume.

• Journal of Environmental Policy
• /
• v.6 no.3
• /
• pp.33-56
• /
• 2007

Use of chemicals has greatly increased along with development of human civilization. Concerns about potential effects of chemicals on human health and environment have also grown accordingly. Due to the enormous number of chemicals being used, however, it is neither practical nor feasible to regulate all the chemicals. Therefore, it is necessary to identify chemicals that deserve more immediate attention, based on the effects on receptors to be protected. This study was initiated by the need for developing management policies for Shihwa-Banwol Techno Valley and its vicinities of korea, where complaints and concerns on environmental contamination have been raised for long time. This study to identifies major chemicals that deserve most immediate attention in environmental health management in this area. For this purpose, the study employed CHEMS-1(Chemical Hazard Evaluation for Management Strategies), and used chemical data from Toxics Release Inventory(TRI) and environmental contamination data from the environmental pollution monitoring network. Top priority pollutants identified in Shihwa-Banwol Techno Valley area were metals and volatile organic compounds, such as dichloromethane, trichloroethylene, diazinon, tetrachloroethylene, chromium compounds, tin compounds, chloroacetic acid, ethyl acetate, and zinc compounds, in an order of decreasing importance. An evaluation of physicochemical properties of the priority chemicals and the environmental pollution monitoring network database in Shihwa-Banwol Techno Valley suggested that the media that are of potential concern would be the atmosphere and aquatic environment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.11
• /
• pp.1612-1617
• /
• 2009

Aspergillus sp. 101 was isolated from the Korean traditional soybean paste for the production of a salt-tolerant protease. The optimal condition for the production of a salt-tolerant protease was determined with various energy sources such as carbon, nitrogen, and protein, and at different culture conditions such as temperature, pH, incubation time and NaCl concentration. The most favorable organic nitrogen sources were 2% defatted soybean flour (DSF) and soy protein isolate (SPI). Optimal pH and temperature were pH 6.0 and $25{\sim}27^{\circ}C$, respectively. Therefore, Aspergillus sp. 101 protease was a mild acid (or neutral) protease. Protease production was the highest at 0.1% concentration of $CaCO_3,\;K_2HPO_4$ and Arabicgum. Aspergillus sp. 101 could grow in culture medium at 15% NaCl concentration and produce a salt-tolerant protease even at 7% NaCl. The cell mass and protease activity of Aspergillus sp. 101 cultured in a modified medium was comparatively higher in Czapek dox and protease producing media. Hence, Aspergillus sp. 101 protease can be utilized in soy or fish sauce industry as a salt-tolerant protease starter.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.307-313
• /
• 2015

Unpolished rice (UR) is considered to be a healthy alternative to white rice when coping with chronic diseases. In the present study, the fermented slurry of unpolished rice (FSUR) was evaluated with respect to its antimicrobial activities and biochemical characteristics, including the quantities of sugar, total soluble sugar, organic acids, free amino acids, pH, and physiological activity. The antimicrobial efficiency of FSUR was assessed using the paper disc-agar diffusion method. FSUR exhibited strong antimicrobial activity against six pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Listeria monocytogenes, Pseudomonas aeruginosa, Salmonella typhimurium, and Yersinia enterocolitica) and two fermentation strains (Gluconacetobacter intermedius and Lodderomyces elongisporus). The antimicrobial activity of FSUR was higher than the commercial antibiotics, carbenicillin ($50{\mu}g/ml$) and tetracycline ($50{\mu}g/ml$) against S. aureus, E. coli, L. monocytogenes, P. aeruginosa, S. typhimurium, Y. enterocolitica, and L. elongisporus. Also FSUR had a high antioxidant activity. The microorganisms were isolated from FSUR using tryptic soy broth and yeast extract-peptone-dextrose agar media. The isolated microorganisms were characterized using physiological and biochemical analyses as well as by 16S rRNA gene sequencing and phylogenic analysis. 16S rRNA gene sequence analysis showed that the isolated microorganisms had a high similarity to G. intermedius, Lactobacillus casei, Lactobacillus plantarum, and Acetobacter peroxydans.

• KSBB Journal
• /
• v.16 no.2
• /
• pp.133-139
• /
• 2001

To treat piggery wastewaters containing refractory compounds including nitrogen, biological treatments were investigated. In biological treatment, the removal efficiencies of organics and nitrogen by the activated sludge process and bioreactor using a BACC (Biological Activated Carbon Cartridge) media filled with granular activated carbon were examined. The results were as follows; in the biological process, when the approximate influent BOD concentration of 620 mg/L, through dilution, was treated by the activated sludge process, the process should be operated at a HRT of over 8 days to maintain an effluent BOD concentration of lower than 100 mg/L. In the treatment of piggery wastewater using a BACC bioreactor, when the HRT was 200 hours, the BOD, COD(sub)cr, and TKN removal efficiency of the effluent were 94, 75 and 64.3%, respectively. Comparing the BACC bioreactor with the activated sludge process, when the volumetric loading rate was 0.3 g BOD/L.day, the specific substrate removal rate of BOD was 0.14 g BOD removed/L.day in the activated sludge process which compared with 0.27 g BOD removed/L$.$day in the BACC bioreactor. The BACC bioreactor showed on average a 2-fold higher removal rate and was superior to the activated sludge process in wastewater treatment in terms of variations of loading time and high loading time. Therefore, the BACC process can effectively treat piggery wastewater containing high concentrations of nitrogen and organic compounds.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.327-334
• /
• 2002

Method of besoil analysis were difficult to be applied universally since the use and the source material of bedsoils are diverse from country to country. Korean Standard Methods for Bedsoil Analysis was developed to measure the particle and bulk density. Fifty-three samples for horticultural bedsoil and nine samples for paddy rice bedsoil in the current market were collected. Particle density was measured by electrical pyconometer with He gas, and bulk density by the sandbox method, free fall method, plunger compaction method, free fall and plunger method, and sample weight compaction method. While the use of glass pycnometer which measures particle density to fill blank space with water was inappropriate due to floating organic and calcined inorganic materials in the water, the electrical pycnometer with gas type was suitable considering speed and accuracy. For bulk density, the sandbox method recommended as European Standard Method was more reasonable in principle than other methods. However, this method requires expensive apparatus and intricate process. Plunger compaction method was proposed as standard method, since it had higher consistence with the sandbox method than other methods, as well as an advantage of easy and prompt measurement. Particle density of bedsoil ranged $1.48{\sim}2.67Mg\;m^{-3}$(mean $1.93Mg\;m^{-3}$) for horticultural bedsoil and $2.33{\sim}2.67Mg\;m^{-3}$ (mean $2.43Mg\;m^{-3}$) for paddy rice bedsoil by the electrical pycnometer with He gas. Bulk density of bedsoil ranged $0.11{\sim}0.40Mg\;m^{-3}$ (mean $0.22Mg\;m^{-3}$) for horticultural bedsoil and $0.84{\sim}1.26Mg\;m^{-3}$(mean $1.01Mg\;m^{-3}$) for paddy rice bedsoil by plunger compaction method.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.185-191
• /
• 2021

In our study, we evaluated possibility of distillation process introduction for Korean Rubus coreanus balsamic vinegar production development, has a less complicated and more rapid process leading to higher production volumes and cost savings. In order to investigate the applicability of concentrated vinegar fraction (CVF) and distilled vinegar fraction (DVF) obtained from the distillation process as balsamic and distillation vinegar, acidity, pH, and specific gravity (S.G.) were measured for the vinegar fraction obtained from the distillation process. The acidity of final CVF (60% of initial volume) obtained 4 types of vinegar (acidity; 4.42, 4.84, 5.61, and 6.35) were increased mean 38.1%, compared to initial acidities. Especially, acidity and pH of the final CVF was similar to balsamic vinegar. In addition, acidity of DVF also increased and it of the final fraction was 4.41%, 4.95%, 5.88%, and 6.72%, respectively. And it was suggested that the final DVF could be used as distilled vinegar. In this study, it was confirmed that vinegar can be effectively concentrated through the distillation process, and distilled vinegar can be produced at the same time. However, it is thought that the introduction of the distillation process can be decided only after additional biochemical characteristics such as organic acid content and antioxidant activity measurement for each vinegar fraction are analyzed.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.95-99
• /
• 2018

High thermal conductivity films with electrically insulating properties have a great potential for the effective heat transfer as substrate and thermal interface materials in high density and high power electronic packages. There have been lots of studies to achieve high thermal conductivity composites using high thermal conductivity fillers such alumina, aluminum nitride, boron nitride, CNT and graphene, recently. Among them, hexagonal-boron nitride (h-BN) nano-sheet is a promising candidate for high thermal conductivity with electrically insulating filler material. This work presents an enhanced heat transfer properties of ceramic/polymer composite films using h-BN nano-sheets and PVA polymer resins. The h-BN nano-sheets were prepared by a mechanical exfoliation of h-BN flakes using organic media and subsequent ultrasonic treatment. High thermal conductivities over $2.8W/m{\cdot}K$ for transverse and $10W/m{\cdot}K$ for in-plane direction of the cast films were achieved for casted h-BN/PVA composite films. Further improvement of thermal conductivity up to $13.5W/m{\cdot}K$ at in-plane mode was achieved by applying uniaxial compression at the temperature above glass transition of PVA to enhance the alignment of the h-BN nano-sheets.

• Journal of the Korea Convergence Society
• /
• v.12 no.11
• /
• pp.419-426
• /
• 2021

Until recently, various studies for the production of high-acidity vinegar have been conducted, but there have been few studies on the concentration process of vinegar. In this study, the possibility of introducing freeze-concentration method was investigated for the production of high-quality, high-acidity vinegar. Acidity, pH, specific gravity, and glucose concentration were measured for frozen concentrated vinegar fractions obtained by freezing and thawing three types of Rubus coreanus vinegar with different acidy (7.53, 5.43, and 3.72). Acidity, specific gravity, and glucose concentration were all highest when 15% of the original vinegar was thawed. pH was the lowest when 15% of the original vinegar was melted. As a result of the measurement of cumulative acidity, when 20% of the original vinegar was melted, it was the highest at 9.32, which was 3.89 higher than that of the original vinegar. In this study, it was confirmed that vinegar can be effectively concentrated using the freeze concentration method and at the same time, the thawing ratio can be controlled to effectively obtain vinegar with the desired acidity. However, it is considered that studies such as organic acid and amino acid analysis are needed to determine whether the freeze-concentration method is introduced into the high-acidity concentrated vinegar manufacturing process.

• Journal of Life Science
• /
• v.34 no.6
• /
• pp.393-398
• /
• 2024

The purpose of this study was to verify the antifungal properties of various herbal medicines belonging to the Ranunculaceae family and to find an extraction method effective in inhibiting fungal growth. When antifungal activity was measured in a liquid medium with extracts obtained by either hot water extraction or organic solvent extraction of the herbal medicines Clematis apiifolia, Coptis chinensis, and Pusatilla chinensis, effective results were obtained from the chloroform extract. In addition, fungal growth inhibition experiments were performed on unicellular fungi, Candida albicans, Candida tropicalis, and Candida lusitaniae, and on filamentous fungi, such as Pythium ultimum, Aspergillus fumigatus, and Fusarium oxysporum, using disk diffusion experiments on solid media. It was confirmed that P. chinensis extract has excellent antifungal properties against Candida spp. and C. apiifolia extract against filamentous mold. Finally, GC-MS analysis was performed to explore the useful antifungal substances present in the extract. As a result of the study, thurbergenone from C. apiifolia and 16-hydroxycleroda-3, 13(14)-dien-15, 16-olide (16-HCDO) from C. chinensis were confirmed as antifungal candidates. In conclusion, it was confirmed that C. apiifolia, C. chinensis, and P. chinensis have antifungal activity against various fungi, and in GC-MS analysis, all herbal medicines were confirmed to have different antifungal candidates. These results indicate that the Ranunculaceae family has evolved in several directions for fungal resistance traits.