도시 하수처리장에서 발생되는 반송수의 성상과 처리계통에서의 영향을 검토하기 위해 본 연구가 수행되었다. 각 단위 공정별 반송수의 유량과 분석자료를 이용하여 물질수지를 작성한 뒤 반송수의 특성을 결정하였으며 실험실 완전혼합 활성슬럿지 반응조를 현장 운전 조건과 유사한 방법으로 운전하여 반송수의 영향을 살펴보았다. 연구 결과 반송수의 유량은 유입원수량에 대해 1.2-1.8%로 적은 양이지만 높은 농도로 인하여 유기물과 영양소 부하량은 평균 부하시 20-30% 정도로 증가되고 있었으며 충격부하시는 40-70 %까지 증가되고 있었다. 혼합하수의 침전효율은 BOD 30%, SS 45%를 나타내고 있으나, 반송수에 의한 부하증가로 인해 BOD의 제거효율은 원수 기준시 10% 미만으로 떨어져 포기조에 큰 영향을 미치고 있었다. 즉, 반송수의 평균부하가 포기조에 유입되는 경우 반송수의 유입이 없는 경우에 비해 10%의 BOD 제거효율이 저하되었고 충격부하시는 80% 이상의 BOD 제거효율을 얻을 수 없었으며 50% 이하의 질산화율에 불과하였다.
유기이차전지가 가지고 있는 전극 내 낮은 접합력과 높은 계면저항의 단점을 해결하기 위하여 본 연구에서는 흑연 코팅 처리된 집전체를 사용하여 lithium terephthalate (LTA)전지의 전기화학적 특성 변화를 분석하였다. LTA 음극 활물질은 산의 이온 치환반응에 의하여 불순물 없이 합성되어 졌다. 막대 형태의 LTA 활물질로 제작된 전극과 흑연 코팅 처리된 집전체와의 접합특성은 SEM 단면과 EIS를 통하여 확인하였다. 흑연 코팅된 집전체를 사용한 LTA전지의 계면저항은 현저히 감소되었다. 순수한 금속 집전체 LTA 전지와 흑연 코팅 처리된 금속 기판 LTA 전지는 0.1C의 두 번째 사이클에서 107.6 mAh/g와 148.8 mAh/g의 방전 용량을 보인다. 흑연 코팅된 집전체를 사용한 LTA 전지는 순수한 LTA 전지에 비하여 우수한 수명 특성과 높은 방전 용량, 그리고 높은 고율 특성을 가진다.
액정(LCD)과 반도체 제조공정에서 발생하는 인산, 질산, 초산, Al, Mo 등이 혼재하고 있는 인산계 혼산폐액을 액정제조공정에서 사용할 수 있는 고순도 에칭액으로 재활용하기 위해서 용매추출법, 진공 증발법, 확산투석법 및 이온교환법의 각각의 기술적 특성을 살린 혼합 처리공정을 이용하여 고순도 인산 회수 기술을 확립하고 상용화 시스템을 개발하고자 하였다. 시험 결과 진공증발에 의해 질산과 초산을 100% 제거할 수 있었고, TOP를 사용한 용매추출에서도 추출 4단, 탈거 6단, 상비 1/3으로 완벽하게 제거할 수 있었다. 이온교환의 전단계로 적용한 확산투석에서 Al 97%, Mo 75% 제거할 수 있었고 이온교환공정에서 Al 및 Mo를 각각 1ppm 이하로 정제할 수 있었다.
31 종류의 유기 염소계 잔류 농약을 동시에 분석하는 기체 크로마토그래피 방법을 개발하기 위하여 본 연구를 수행하였다. 준비된 분석 시료를 ECD (electron capture detector)로 Ultra-2 column의 GC (gas chromatography)에 주입하였다. Column 충진 물질을 florisil과 alumina N으로 변화시키면서 잔류 용액을 column에 loading하고 용출 용매로는 ether . benzene(2 : 8) solution, hexane . benzene(1 . 1) solution, dichloromethane, acetone 및 methanol을 사용하였다. 분석 결과 column 충진 물질로 florisil을 사용하였을때 (첫째 조건) 6종류의 유기 염소(dichlorfluanid, captan, chlorofenvinfos, folpet, captafol과 dicofol)가 검출되지 않았다. 이 조건에서 dichloromethane과 methanol을 용출 용매로 첨가하였을때는 (둘째 조건) 첫째 분석 조건하에서 검출되지 않았던 6종류의 유기 염소가 검출되었고 thrin계 pesticides, 특히 captan과 captafol의 recovery가 증가하였다(첫째 조건에서와 마찬가지로 충진 물질로 florisil을 사용). 그러나 BHC(benzene hexachloride) 화합물의 recovery는 감 소하였다. 한편 alumina N을 column 충진 물질로 사용하였을 경우에는 dichlorfluanid, chlorofenvinfos, folpet 및 dicofol의 recovery가 증가하였으며 aldrin도 그러하였다. 하지만 captan과 captafol은 그렇지 못하였다. Thrin계 pesticides, captan 및 captafol을 동시에 검출하기 위하여 florisil과 alumina N을 충진 물질로 동시에 사용하고 n-hexane을 충진시켜 용출시킨 결과, captan과 captafol이 검출되지 않았는데 이는 column이 충분히 활성화되지 않았기 때문이라고 생각된다. Column(florisil과 alumina N을 충진 물질로 동시 사용)을 충분히 활성화시키고 여러가지 용출 용매를 사용하여 불순물을 제거하였을때 분석 결과가 가장 우수하였다(31 종류의 유기 염소계 잔류 농약이 sharp하게 검출되었고 높은 감도를 나타내었다).
Photoelectrochemical (PEC) systems are promising methods of producing H2 gas using solar energy in an aqueous solution. The photoelectrochemical properties of numerous metal oxides have been studied. Among them, the PEC systems based on TiO2 have been extensively studied. However, the drawback of a PEC system with TiO2 is that only ultraviolet (UV) light can be absorbed because of its large band gap (3.2 - 3.4 eV). Two approaches have been introduced in order to use PEC cells in the visible light region. The first method includes doping impurities, such as nitrogen, into TiO2, and this technique has been extensively studied in an attempt to narrow the band gap. In comparison, research on the second method, which includes visible light water splitting in molecular photosystems, has been slow. Mallouk et al. recently developed electrochemical water-splitting cells using the Ru(II) complex as the visible light photosensitizer. the dye-sensitized PEC cell consisted of a dye-sensitized TiO2 layer, a Pt counter electrode, and an aqueous solution between them. Under a visible light (< 3 eV) illumination, only the dye molecule absorbed the light and became excited because TiO2 had the wide band gap. The light absorption of the dye was followed by the transfer of an electron from the excited state (S*) of the dye to the conduction band (CB) of TiO2 and its subsequent transfer to the transparent conducting oxide (TCO). The electrons moved through the wire to the Pt, where the water reduction (or H2 evolution) occurred. The oxidized dye molecules caused the water oxidation because their HOMO level was below the H2O/O2 level. Organic dyes have been developed as metal-free alternatives to the Ru(II) complexes because of their tunable optical and electronic properties and low-cost manufacturing. Recently, organic dye molecules containing multi-branched, multi-anchoring groups have received a great deal of interest. In this work, tri-branched tri-anchoring organic dyes (Dye 2) were designed and applied to visible light water-splitting cells based on dye-sensitized TiO2 electrodes. Dye 2 had a molecular structure containing one donor (D) and three acceptor (A) groups, and each ended with an anchoring functionality. In comparison, mono-anchoring dyes (Dye 1) were also synthesized. The PEC response of the Dye 2-sensitized TiO2 film was much better than the Dye 1-sensitized or unsensitized TiO2 films.
단백석이 주성분을 이루는 포항 지역산 규질 이암을 합성원료로 하여 $80^{\circ}C$의 온도 조건에서 10∼15%농도의 TMAOH 및 TMAOH+NaOH 용액으로 수열 반응시켜 유기 스멕타이트를 합성하였다. 이 실험에서 NaOH와 TMAOH의 혼합용액으로 처리했을 경우에는 스멕타이트 의에 NaP와 하이드록시소달라이트가 함께 합성되는데 비해서, TMAOH 용액만으로 처리했을 경우에는 이들이 수반됨이 없이 스멕타이트만 생성되었다. 합성된 스멕타이트는 X-선회절 분석, 시차열분석 및 적외선 흡광 분석을 통해서 결정구조상의 층간에 $TMA^{+}$ 이온이 개재된 몬모릴로나이트 계열의 유기 스멕타이트인 것으로 밝혀졌다. 스멕타이트 생성을 조장시킨 주요 반응 모질물은 단백석으로 밝혀졌고, 이 유기 스멕타이트의 골격 성분인 Al의 공급원으로서는 원료 물질 내에 상당량 함유되는 퇴적물기원의 스멕타이트가 그 역할을 담당하는 것으로 해석된다. 반응성이 상대적으로 낮은 석영과 운모는 대부분 이 합성반응에 관여하지 못하고 반응산물 내에서 주요 불순물로서 잔존된다. 이 같은 실험 결과들은 앞으로 이 합성 반응계에 적합한 Al 공급원이 동원될 수 있다면 저온($100^{\circ}C$ 이하)에서 이 이암을 원료로 하여 새롭고 효과적인 유기 스멕타이트의 수열합성 방안이 마련될 수 있음을 시사한다.
A novel platinum aminoalkoxide complex, Pt$(dmamp)_2$ has been prepared by the reaction of cis-$(py)_2PtI_2$ with two equivalents of Na(dmamp) (dmamp = 1-dimethylamino-2-methyl-2-propanolate). Single-crystal X-ray crystallographic analysis shows that the Pt(dmamp)2 complex keeps a square planar geometry with each two nitrogen atoms and two oxygen atoms having trans configuration. Platinum films have been deposited on TaN/ Ta/Si substrates by metal organic chemical vapor deposition (MOCVD) using Pt$(dmamp)_2$. As-deposited platinum thin films did not contain any appreciable amounts of impurities except a little carbon. As the deposition temperature was increased, the films resistivity and deposition rate increased. The electrical resistivity (13.6 $\mu\Omega$cm) of Pt film deposited at 400 ${^{\circ}C}$ is a little higher than the bulk value (10.5 $\mu\Omega$cm) at 293 K. The chemical composition, crystalline structure, and morphology of the deposited films were investigated by X-ray photoelectron spectroscopy, X-ray diffraction, and atomic force microscopy.
본 연구는 비수용성 위생용품의 수요와 공급이 증가하고 있는 상황에서 분뇨 및 하수처리시설의 물재생센터 처리과정중 비수용성 위생용품 관련 문제점을 분석하여 그 개선방안을 마련하고자 수행하였다. 그 결과, 물재생센터의 개선방안은 전처리설비에 주안점을 두어야 할 것이며 향후 설비교체시 하수처리시설의 경우에는 현실에 맞는 각종 제진기 설치를 제안하며, 분뇨처리시설은 조목스크린과 협잡물종합처리기 연계 또는 협잡물종합처리기 단독설치하는 방안을 제안한다. 또한 분뇨처리시설은 우선적으로 협잡물종합처리기 전단에 미세스크린을 설치하여 비수용성 물질을 분리하여야 하며 협잡물처리기의 유지관리 공간 확보가 필요하다.
The high-temperature superconductor YBa2Cu3O7-x (YBCO) have attached attentions because of a high superconducting transition temperature, low surface resistance, high superconducting critical current density (Jc), and superior superconducting capability under magnetic field. Moreover, the Jc of YBCO superconductors can be enhanced by adding impurities to the YBCO films for vortex-pinning. Understanding and controlling pinning centers are key factors to realize high Jc superconductors. We synthesized vertically-aligned ZnO nanorods on SrTiO3 (STO) substrates by catalyst-free metal-organic chemical vapor deposition (MOCVD), and subsequently, deposited YBCO films on the ZnO nanorods/STO templates using pulsed laser deposition (PLD). The various techniques were used to analyze the structural and interfacial properties of the YBCO/ZnO nanorods/STO hybrid structures. SEM, TEM, and XRD measurements demonstrated that YBCO films on ZnO nanorods/STO were well crystallized with the (001) orientation. EXAFS measurements from YBCO/ZnO nanorods/STO at Cu K edge demonstrated that the local structural properties around Cu atoms in YBCO were quite similar to those of YBCO/STO.
This study is about controlled impurities, which make metal alloys, especially AC4CH alloy that is made by restraining 0.2% Fe and Aluminum to make a matrix material. A metal matrix composite is produced using the squeeze casting method. The first step in the squeeze casting method is to add some organic binder including aluminum borate whisker into the matrix. After the fabrication of a metal matrix composite, each is individually appended to an inanimate binder such as SiO$_2$, Al$_2$O$_3$, and TiO$_2$. Through experiments the mechanical property changes were investigated between the metal matrix composite and AC4CH alloy. This study proves the superiority of the mechanical property of a metal matrix composites over AC4CH according to the previous tests and results that were mentioned above. One excellent property of matrix material composites is the infiltrated TiO$_2$ reinforcement. This material is a good substitute for the existing materials that are used in the development of industries today.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.