• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.289-290
• /
• 2002

휘발성 유기 화합물(Volatile Organic Compounds, VOCs)은 주로 도장산업, 석유정제 및 저장시설, 화학공업, 자동차 등으로부터 배출되며 광화학적 산화물을 생성시킬 뿐만 아니라 성층권 오존층 파괴나 지구온난화에도 기여함으로써 환경에 악영향을 미치는 물질이다 또한, 대부분의 VOC가 인체에 유해하며 일부 물질들은 발암성을 가지는 것으로 평가되고 있어 배출이 엄격하게 규제되는 물질이다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.312-312
• /
• 2008

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.673-676
• /
• 1999

We fabricated green sheet by tape casting method with fluormica glass-ceramic powders for fabrication of low temperature co-firing substrate. After ball milling with organic additives, we investigated green strength and density of green sheets which were casted by doctor blade machine. Green sheets were sintered at 700 ~ 1,00$0^{\circ}C$ for 1 ~3hrs. Microstructure, linear shrinkage and dielectric constant of substrates were surveyed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1295-1297
• /
• 2007

In this study, we report that the characteristics of OTFTs can be improved by the UV exposure of the surface of the synthesized photo-reactive gate insulator, and be optimized by controlling the exposure time. As a gate dielectric, the modified PVP was prepared by substituting hydroxyl group in PVP with cinnamoyl group. The synthesis details and the effects of the modified PVP on the device performance are discussed.

• YAKHAK HOEJI
• /
• v.22 no.1
• /
• pp.8-14
• /
• 1978

The method that changes sodium cloxacillin from amorphous form to hydrate form was investigated. Using organic solvents of which dielectric constants are greater than 9, the amorphous sodium cloxacillin could be changed to hydrate form. The difference of water content of sodium cloxacillin hydrate caused the differences of ir spectrum at $3,350~3,360cm_{-1}$, and owing to the decrease of water content, hydrate form was changed to the morphous form, which could be identified by x-ray diffraction pattern. Regarding the stability of sodium cloxacillin in activity, the hydrate form was stable but the amorphous form was very unstable. Moreover, the stable hydrate form was scarcely hygroscopic, while the other form was hygroscopic, becoming a fused state ar $50^{\circ}$. and R.H. 50%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1288-1290
• /
• 2005

We report on the structural and electrical properties of amorphous Yttria-stabilized zirconia (YSZ) thin films which are the potential high-k gate dielectric material of organic thin film transistor (OTFT). To investigate the influence of the oxygen flow rate on the structural and electrical properties of the YSZ films, XRD, XPS, J-E, I-V were carried out in this work. Oxygen vacancies are expected to be the most predominant type of defect in metal-oxide dielectrics. The leakage current density decreased mainly because of the reduction of oxygen vacancies with increasing oxygen flow rate.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1515-1517
• /
• 2001

In this work the electrical characteristics of organic TFTs with the semiconductor-insulator interfaces have been interested. Pentacene is used as an active semiconducting layer. The semiconductor layer of pentacene was thermally evaporated in vacuum at a pressure of about $2{\times}10^{-6}$ Torr and at a deposition rate of 0.3$\AA$/sec. Aluminium and gold were used for gate and source/drain electrodes. before pentacene is deposited on the insulator, the gate dielectric surfaces of two samples were rubbed with lateral and perpendicular to direction of the channel length respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.543-546
• /
• 2004

Bias and frequency-dependent impedance is a technique for the investigation of complex conductivity. At low frequency, complex impedance is dominated by resistive component, and at high frequency by capacitive component. We are going to present the results of the bias and frequency-dependent complex impedance in the device structure of $ITO/Alq_3/Al$ in the temperature range between 10K and 300k. And we will show to change radius of Cole-Cole plot. It will be decrease resistance by temperature. Also equivalent electrical circuit and dielectric relaxation can be accomplished by using the complex impedance analysis.

• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.33-36
• /
• 2009

In this paper, evaluation of physical properties was made for dielectric relaxation phenomena by the detection of the surface pressures and displacements current on the monolayer films of fatty acid monomolecular Arachidic Acid, Stearic Acid using compressing velocity. LB(Langmuir-Blodgett) thin films were manufacture by detecting deposition for the accumulation and the current was measured after the electric bias was applied across the manufactured MIM device. The physicochemical properties of the fatty acid monomolecular Arachidic Acid, Stearic Acid films surface structure has been studied by AFM. We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is gas state, liquid state, solid state. Formation that prevent when gas phase state and liquid phase state measure but could know organic matter that molecules form equal and stable film when molecules were not distributed evenly, and accumulated in solid state only.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.770-772
• /
• 2002

A new dry-processing method of organic gate dielectric film in field-effect transistors (FETs) was proposed. The method use vapor deposition polymerization (VDP) that is continuous and low temperature process. It has the advantages of shadow mask patterning and dry processing in flexible low-cost large area applications. Here, 80 nm-thick Al as a gate electrode was evaporated through shadow mask. Gate insulators used two different polyimides. The one material was 4,4'-oxydiphtahlic anhydride (ODPA) and 4,4'-oxydianiline (ODA). Another was 2,2-bis(3,4-dicarboxyphenyl) Hexafluoropropane Dianhydride (6FDA) and 4,4' -oxydianiline (ODA). These were co-deposited by high-vaccum thermal-evapora and cured at 150 $^{\circ}C$ for 1 hour, respectively. Pentacene as a semiconductor and 100 nm-thick Au as a source and drain electrode were evaporated through shadow mask.