• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.391-398
• /
• 2002

Trace organic contaminants in deep-sea sediments near Dokdo were analyzed. Total PAMs concentration ranged 14.8-314 ng/g dry weight and high molecular weight PAHs were dominant. The highest PAHs concentration was detected at A19 which located at Ulleung Basin. Most of organochlorines were under detection limit. Among the detected organochlorines, DDT compounds were dominant and followed by HCHs and HCB. Butyltin compounds and most of organophosphorus pesticides were not detected. Vertical distribution of PAHs showed typical sub-surface maximum and decreasing trends depending on depth. The highest PAHs concentration reached 454ng/g. Some organochlorines, DDT, HCH was detected and also showed decreasing trends. Other target organic pollutants were not detected in core sediments. Abnormally high level of PAHs concentration in A19 was discussed and the input sources were inferred to be the transport of sludge derived pollutant dumped at dumping site 'Byung' by deep current.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.229-238
• /
• 2010

Poly($\varepsilon$-caprolactone) nano/microcapsules(nmcPCL) containing phytoncide oil were synthesized by emulsion diffusion method using ethyl acetate and poly(vinyl alcohol) (PVA) as an organic solvent and an emulsion stabilizer respectively. The influence of the degree of saponofication of the PVA and the weight ratio of core to wall materials was investigated to design nanocapsules in terms of particle size, morphology, and emulsion stability. The encapsulated nmcPCL were characterized by FT-IR spectrometry, particle size analyzer and scanning electron microscope. Mean size of nanocapsules prepared with PVA with a degree of saponofication of 87% was smaller than those of PVA with a degree of saponofication of 98.5% and the mean particle size of the capsules decreased with increasing core/shell ratio.

• Korean Journal of Organic Agriculture
• /
• v.4 no.2
• /
• pp.97-136
• /
• 1995

Recendtly an organic agricultured in Korea is getting a public attention not only for minimizing NO3- contamination of groundwater but also for producing of quility of agricultural products. But still there is not Basic Standards for Organic Agriculture in Korea and Japan since they just believe organic agriculture is one kind of the environmental friendly sustainable agriculture as written in western literature. In the paper it was discussed the core skills and doctrine of IFOAM Basic Standards compare to Korean Organic Farming Method in oder to point out thed disadvantages of overuse of organic fertilizer, 50-150MT/㏊ in each cultivation, intensive monocropping in glass-house without any rotation & legume, and without any green manure. Most korean or-ganic farmer believe that the more they apply organic fertilizer, the better they pro-duce high quility of crops and they practise organic agriculture completely. It was also suggested the overuse of organic fertilizer cause the accumulation of NO3- in rhizosphere and subsequently it might lead to drinkwater pollution by nitrate leaching. In conclusion it is suggested that for successful establishment of organic agriculture, The Association of Korean Organic Agriculture, The Society of Korean Organic Agri-culture and the certification body should be developed the Basic Standards which is acceptable by IFOAM Basic Standards.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.6
• /
• pp.777-787
• /
• 2017

Organic enrichment and pollution was investigated in surface sediments from Jinhae Bay and Geoje-Hansan Bay of Korea, which contain the largest oyster farms in Korean coastal areas. Geochemical indicators (chemical oxygen demand, total organic carbon, ignition loss, and acid volatile sulfide) in sediments, ammonium and nitrate in pore water, and bioluminescence inhibition test for sediment extracts were analyzed. Temporal changes of organic enrichment were also investigated using sediment core samples from Geoje-Hansan Bay. The level of organic pollution in sediments from Jinhae Bay was significantly greater than that of sediments from Geoje-Hansan Bay. Compared with other sites, Jinhae Bay was one of the most polluted coastal areas of Korea. The levels of geochemical indicators in May were comparable to, or higher than, in August. Ammonium concentrations in pore water were two orders of magnitudes greater than the nitrate concentrations, suggesting that the bays are reducing environments. The concentrations of total organic carbon in core sediment samples from shellfish-farming areas increased significantly from 2000 to the present year, and it seems to be associated with increases in anthropogenic activities.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.290-292
• /
• 2004

Multimode channel waveguides were fabricated using a direct UV patterning technology from thick films deposited by the one-step dip-coating of an organic/inorganic hybrid material (ORMOCER(equation omitted). The core size of the covered ridge waveguide was 43${\times}$51 $\mu\textrm{m}$$^2$; the waveguides can be readily prepared for multimode applications by direct UV patterning. The waveguides exhibited smooth surface profiles and a low optical loss of 0.07 ㏈/cm at the most important wavelength (850nm) used for optical interconnects.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.74-79
• /
• 2009

The inorganic-organic composite particles with core-shell structure were polymerized by using styrene and potassium persulfate (KPS) as a shell monomer and an initiator, respectively. We studied the effect of surfactants on the core-shell structure of silicone dioxide/styrene composite particles polymerized in the presence of sodium dodecyl sulfate(SDS), polyoxyethylene alkylether sulfate (EU-S133D), and at none surfactant condition. We found that $SiO_2$ core / polystyrene(PS) shell structure was formed when polymerization of styrene was conducted on the surface of $SiO_2$ particles, and the concentration SDS and EU-Sl33D was $8.34{\times}10^{-2}mole/L$. The core-shell structure was confirmed by measuring the thermal decomposition of the polymer composite using thermogravimetric analyzer (TGA), and the morphology of the composite particles was characterized by transmission electron microscope (TEM).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.103-103
• /
• 2005

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.404-409
• /
• 2008

The core-shell composite particles of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate (KPS) as an initiator. We studied the effect of core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alky lether sulfate (EU-S133D). We found that when $SiO_2$ core/PSt shell polymerization was prepared on the surface $SiO_2$ particle, to minimize the coagulation during the shell polymerization, the optimum conditions were at concentration of $2.56{\times}10^{-2}mole/L$ SLS. The structure of core-shell polymer was confirmed by measuring the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of core-shell polymer particles by transmission electron microscope (TEM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.264-267
• /
• 2005

Soft magnetic iron powders have been coated with polyester or phenol resin. And the coated powder (soft magnetic composite) have been pressed into ring type core over the pressure of 870 MPa. Green density, magnetic flux density, permeability, core loss of the samples were measured to look at the effect of the coating materials and the amount of them. Green density is increased with the amount of coating materials and shows the maximum value, 6.5 $g/cm^3$ at 5 w/o, but decreased over it. And lowest value of the core loss is showed for the 5 w/o coated samples.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.52-60
• /
• 2013

Partially hydrolyzed cellulose acetate (CA) fibers were prepared by treating CA fibers in aqueous $Na_2CO_3$ solutions of various concentrations. The deacetylation of CA fibers was confirmed through FTIR spectra and WAXD patterns. The hydrolysis was confined to the surface part of the CA fiber by controlling the treatment conditions. The resultant fibers had a sheath-core structure with a sheath component of regenerated cellulose and a core of non-hydrolyzed cellulose acetate. The SEM images of the surface-hydrolyzed CA fibers, the core of which was dissolved out using acetone as the solvent, showed that the sheath thickness increased with increasing alkaline concentration, indicating an increase in the hydrolyzed fiber, i.e., regenerated cellulose. Polarized FTIR analysis of the polyimide film rubbed with velvet fabrics of surface-hydrolyzed CA fibers showed that polyimide molecules were preferentially oriented to the rubbing direction.