• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.235-235
• /
• 2012

We investigated the energy levels of valence region at the planar junction of poly (3-hexylthiophene) (P3HT) and C61-butyric acid methylester (PCBM) using ultraviolet photoemission spectroscopy (UPS) with ultra high vacuum. These are the most widely used materials for bulk heterojunction (BHJ) organic solar cells due to their high efficiency. In order to make the planar junction, we carried out the electrospray vacuum deposition (EVD) of PCBM onto spin-coated P3HT in high vacuum conditions (${\sim}10^{-5}-10^{-6}$). The planar junction interface exhibited 0.71 eV for the offset between P3HT HOMO and PCBM LUMO, which is different from the gap (0.85 eV) of individual values and is closer to the open circuit voltage of solar cells fabricated with the same material combination.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.973-976
• /
• 2011

The addition of organic ligand (${\beta}$-diketone or heterocyclic compound) to the europium (III)-containing ionic liquid resulted in bright luminescent soft materials with the molar ratio of europium/ionic liquid (IL)/ligand being 1:3:1 that exhibit bright red light under UV lamp. The luminescent properties such as emission features and lifetime of $^5D_0$ $Eu^{3+}$ excited level are dependent on the organic ligands. The materials were characterized by FT-IR and luminescence spectroscopy. The data shows that at least parts of the ILs (carboxylic acid) are replaced with ${\beta}$-diketone ligand rather than the formation of europium complex with the molar ratio of $Eu^{3+}$:IL: ligand being 1:3:1, while no ILs could be replaced by the heterocyclic ligand such as Bpy and Phen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1624-1628
• /
• 2015

Rigorously standardized laboratory protocols are essential for meaningful comparison of data from multiple sites. Considering that interactions of minerals with organic matrices may vary depending on the material nature, there could be peculiar demands for each material with respect to digestion procedure. Acid digestion procedures were evaluated using different nitric to perchloric acid ratios and one- or two-step digestion to estimate the concentration of calcium, phosphorus, magnesium, and zinc in samples of carcass, bone, excreta, concentrate, forage, and feces. Six procedures were evaluated: ratio of nitric to perchloric acid at 2:1, 3:1, and 4:1 v/v in a one- or two-step digestion. There were no direct or interaction effects (p>0.01) of nitric to perchloric acid ratio or number of digestion steps on magnesium and zinc contents. Calcium and phosphorus contents presented a significant (p<0.01) interaction between sample type and nitric to perchloric acid ratio. Digestion solution of 2:1 v/v provided greater (p<0.01) recovery of calcium and phosphorus from bone samples than 3:1 and 4:1 v/v ratio. Different acid ratios did not affect (p>0.01) calcium or phosphorus contents in carcass, excreta, concentrate, forage, and feces. Number of digestion steps did not affect mineral content (p>0.01). Estimated concentration of calcium, phosphorus, magnesium, and zinc in carcass, excreta, concentrated, forage, and feces samples can be performed using digestion solution of nitric to perchloric acid 4:1 v/v in a one-step digestion. However, samples of bones demand a stronger digestion solution to analyze the mineral contents, which is represented by an increased proportion of perchloric acid, being recommended a digestion solution of nitric to perchloric acid 2:1 v/v in a one-step digestion.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.249-256
• /
• 2008

The objective of this work was to evaluate the germination of 12 rice genotypes under propionic acid stress, a phytotoxic compound produced in low drainage soils with high organic matter content. The tests were conducted with the first count of germination (PCG) and germination (G) of the genotypes subjective to 0, 3, 6, and 9 mM propionic acid concentrations. The seeds of each genotype were placed in germitest paper pre-soaked in treatment solutions forming individual bags. The germination was performed at $25^{\circ}C$ and the counts were carried out at 7 (PCG) and 14 days (G). A factorial random block design was performed with four replications of 50 seeds per genotype. Our study revealed that doses up to 9 mM propionic acid in the pre-soaking solution were efficient for genetic variability studies involving the character germination in rice; genetic variability for germination was detected in the collection of rice genotypes when subjected to propionic acid toxic effects. The genotypes Guichow, Dawn, and Toride-1 showed germination stability when subjected to increasing levels of propionic acid, and genotypes originated from irrigated system-cultivation performed better when subjected to propionic acid stress. These three genotypes will be a good biological material to for enhance the resistance to phytotoxic compounds in rice.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.1
• /
• pp.71-85
• /
• 1997

The purpose of this study was to evaluate concentrations of organic solvent mixtures in air of rotogravure printing workplaces. Qualitative and quantitative analysis of organic solvents contained in the gravure inks used at rotogravure factories had been done. The results obtained were as follows: 1. The gravure inks mainly consist of toluene, methyl ethyl ketone(MEK), and ethyl acetate(EA), and traces of isopropyl alcohol(IPA), xylene, 2-butanol, cyclohexane, cellosolve etc were also contained in them. 2. Thinner used as a diluent consist of toluene, MEK, and EA. 3. Geometric mean concentration of toluene in ambient air were 23.81 ppm at gravure printing of packing material, 42.10 ppm at gravure printing of wallpaper, 16.95 ppm at gravure printing of plastic bottle for beverage and 4.31 ppm at gravure printing of plywood printing or floor covering. Concentrations of toluene in ambient air showed statistically significant difference between types of printing. 4. Concentrations of MEK in ambient air were 12.43 ppm at gravure printing of packing material, 5.47 ppm at gravure printing of wallpaper, 16.78 ppm at gravure printing of plastic bottle for beverage and 16.44 ppm at gravure printing of plywood printing or floor covering. MEK concentrations in ambient air showed no significant difference. 5. Conentrations of EA were 14.30 ppm at gravure printing of packing material, 1.92 ppm at gravure printing of wallpaper and 21.12 ppm at gravure printing of plywood printing or floor covering. EA concentrations in ambient air shown significant difference. 6. Percentage of the workplaces where the ambient air concentration of organic solvent mixtures exceeded the Korean Permissble Exposure Level(KPEL) amounted to 18.03%. 7. Toluene concentrations in ambient air of rotogravure printing workplaces ranged from 0.69 to 156.02 ppm and urinary hippuric acid excretion ranged from 0.10 to $1.32g/{\ell}$.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.5
• /
• pp.902-910
• /
• 2015

This study evaluated the qualitative properties of burdock (Arctium lappa L) peels as food material. Proximate composition, sweetness, pH, total acidity, mineral, fatty acid, free sugar, and organic acid contents of preprocessed burdock were measured. Crude ash, protein, fat, and total dietary fiber contents of non-peeled treated lotus roots were higher than those of peeled treated lotus roots (p<0.05). $^{\circ}Bx$, pH, and total acidity were not different in the peeling process. Redness and yellowness of lotus roots were reduced by the peeling process, whereas lightness increased (p<0.05). The mineral contents of Ca, K, Fe, and P were higher in non-peeled lotus roots, whereas non-peeled treated lotus root showed higher K contents (p<0.05). Maltose content was not significantly different, whereas fructose, sucrose and maltose contents were significantly different. Total organic acid contents were higher in non-peeled lotus roots (p<0.01). However total free amino acid contents were higher in peeled lotus roots (p<0.01).

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.204-210
• /
• 2006

To accept basic data of utilizing of citron (Citrus junos) as a raw material of industrial produce, major chemical components of citron were investigated. Weight ration of poet flesh md seed of citron were 44.7, 42.9 and 12.4%, respectively. Comparing proximate composition of peel and flesh of citron, peel showed higher in crude protein crude fat and crude ash than flesh but lower in moisture, carbohydrate and soluble solid. The major free sugars of citron were fructose, glucose and sucrose. Peel contained higher in sucrose than flesh, but lower in fructose and glucose. The content of K md P were 309 and 15.9 mg% in peel and 175 and 22.4 mg% in fresh, respectively. The main organic acids of citron were citrate, malate and oxalate. Total organic acid content of flesh (6.6%) was higher than that of peel (4.6%). Total amino acid content of peel and flesh were 671.9 and 315.7 mg%, respectively. Free amino acid content of peel and flesh were 324.3 and 280.7 mg%, respectively, and the major ones were proline, serine, glutamic acid, aspartic acid, and histidine. Total 49 volatile compounds were detected and 26 of these ones were identified in cion. The major volatile component of citron was limonene, which consists of 80% among the total volatiles in peel by all extract methods.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.55-55
• /
• 2012

To improve the deodorizing and antibacterial performance of various fabrics (cotton, silk and wool) dyed with pomegranate(Punica granatum L.) extract without mordants, natural colorant solutions, which were extracted from pomegranate using water as an extractant at $90^{\circ}C$ for 90 min with a various liquor ratio (solid natural colorant material/solvent water, weight ratio) from 1:100 to 1:5 were used. To achieve the highest K/S and the deodorizing and antibacterial performance, the best liquor ratio, dyeing bath ratio, dyeing temperature and dyeing time were found to be 1:10, 1:50, $80^{\circ}C$ and 60 min, respectively. The deodorizing performance of dyed cotton, silk and wool fabrics against acetic acid vapor were found to be95,70,90%,respectively. However, all the dyed fabrics displayed outstanding deodorizing performance(99%) against ammonia gas and antibacterial performance(bacteriostatic reduction rate:99.9%) against Staphylococcu aureus and Klebsiella pneumonia(bacteriostatic reduction rate: 99.9%). It is worth noting that pomegranate (Punica granatum L.) colorants notably enhanced the deodorizing and antibacterial performance of cotton, silk and wool fabrics.

• Korean Journal of Materials Research
• /
• v.25 no.3
• /
• pp.144-148
• /
• 2015

Cubic mesocrystal $CeO_2$ was synthesized via a hydrothermal method with glutamic acid ($C_5H_9NO_4$) as a template. The XRD pattern of a calcined sample shows the face-centered cubic fluorite structure of ceria. Transmission electron microscopy (TEM) and the selected-area electron diffraction (SAED) pattern revealed that the submicron cubic mesocrystals were composed of many small crystals attached to each other with the same orientation. The UV-visible adsorption spectrum exhibited the red-shift phenomenon of mesocrystal $CeO_2$ compared to commercial $CeO_2$ particles; thus, the prepared materials show tremendous potential to degrade organic dyes under visible light illumination. With a concentration of a rhodamine B solution of 20 mg/L and a catalyst amount of 0.1 g/L, the reaction showed higher photocatalytic performance following irradiation with a xenon lamp (${\geq}380nm$). The decoloring rate can exceed 100% after 300 min.

• KSBB Journal
• /
• v.20 no.6
• /
• pp.447-452
• /
• 2005

The hydrogen production using immobilized cellsl was conducted using fruit wastewaters at various culture conditions. Three kinds of fruit wastewaters, melon, watermelon and pear were used. Sodium alginate was used as immobilization material. Among them, concentration of reducing sugar which was one of the main components in fruit was the highest at watermelon wastewater, and also hydrogen production was the highest as 2319.2 mL/L in it. Although hydrogen production was not much changed according to sodium alginate concentration, its production was the most at 3%(w/v). As bead size as small, hydrogen production was higher. With inspection of interior, it confirmed that the cell grew well in bead. But the addition of amino acids using as agent for metabolite production had almost no affected on hydrogen productivity. The effective range of $FeSO_4$ addition on hydrogen production were up to 1.2 g/L, and above the concentration, it inhibited the productivity. Organic acids produced during watermelon fermentation were mainly lactic acid, butyric acid, abd acetic acid; and a little of propionic acid.