• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.351-354
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly (N- vinylcarbazole) ( PVK) , 2,5-bis (5-tert-butyl -2- benzoxaBoly) thiophene ( BBOT) , N,N-diphenyl-N,N- (3-methyphenyl) -1,1-biphenyl-4, 4-thiamine(TPD) and poly(3-hexylthiophene) (P3HT) deposited by LB(Langumuir-Boldgett) method. From the AFM(atomic force microscope) images, the monolayer containing 30% of AA(arachidic acid) showed a roughness value of 28$\AA$. In the voltage-current characteristics of ITO/Emitting layer/BBOT/LiF/A1 devices, current density much smaller than that of the spin-coated devices having a same thickness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.78-83
• /
• 2001

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate content and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defect in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.2
• /
• pp.102-111
• /
• 2000

As IR-sensor for detecting pollution material, the iron silicide has a fit band gap, high physicochemical stability at high temperature and good acid resistance. The growing film was formed with the Fe-Si bond and the organic compound because plasma resolved the injected precursors into various active species. In the Raman scattering spectrum, the Fe-Si vibration mode showed at 250 {TEX}$cm^{-1}${/TEX}. The FT-IR peak indicated that the various organic compounds were deposited on the films. The iron silicide was epitaxially grown to β-phase by the high energy of plasma. The lattice structure of films had [220]/[202] and [115]. The thickness of the films increased with the flow rate of silane. But rf-power increased with decreasing the thickness. The optical gap energy and the band gap were shown about 3.8 eV and 1.182∼1.194 eV. The band gap linearly increased and the formula was below: {TEX}$E_g^{dir}${/TEX}= 8.611×{TEX}$10^{-3}N_{D}${/TEX}＋1.1775

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5C
• /
• pp.229-237
• /
• 2009

A conventional way of backfilling has used sand or in-situ soil. It not only requires substantial amount of time and cost but also makes it particularly difficult to fill the bottom part and small cracks of a pipe. To address the problem with the conventional method of compaction, liquefied stabilized soil was proposed as an alternative because it reuses in-situ soil which can ensure sand supply while adjusting flowability and strength of the soil with design of mix proportion. With an aim to identify the mixing properties of liquefied stabilized soil depending on the organic content of in-situ soil, this study conducted indoor tests of material segregation, flowability, strength, and permeability by changing humic acid content of the soil. The results revealed that material segregation and flowability increased proportionally while strength decreased with the increased amount of humic acid. In the mean time, permeability of liquefied stabilized soil wasn't affected by organic content.

• KSBB Journal
• /
• v.19 no.1
• /
• pp.33-37
• /
• 2004

Succinic acid is of interested as the raw material of biodegradable polymer. In this study, succinic acid was separated by reactive extraction using amine extractants such as TOA (trioctylamine) and Aliquat 336. The extractability of TOA for succinic acid was higher than that of Aliquat 336. The distribution of succinic acid into organic phase was decreased with increasing pH in aqueous phase. However, the effect of pH on the extractability of Aliquat 336 was little. In the case of maleic acid which has similar structure to succinic acid, the extractability for maleic acid was higher than that for succinic acid. It was mainly due to the difficulty of deprotonation of second carboxylic group by intramolecular hydrogen bonding.

• Journal of Life Science
• /
• v.24 no.7
• /
• pp.784-790
• /
• 2014

Housefly (Musca domestica L.) maggots are used as biomedical material. Ethanolic extracts of fly maggot (EM) were orally administered to male rats at levels of 0 (control group), 4.0, 6.0, and 8.0 mg per 100 g live weight for 40 days. Serum triglycerides, total cholesterol, and LDL-C decreased by 17.90, 17.60, and 16.37%, respectively, whereas HDL-C increased by 20.48% in the EM group compared with these parameters in a control group (p<0.05). Thymus and spleen weights dose-dependently increased by 21.42% and 21.42%, respectively, but abdominal fat decreased by 39.66% after EM administration compared with that in the control group (p<0.05). IgG, IgA, and IgM increased 35.14, 68.65, and 190.16%, respectively, in the EM groups compared to the control group (p<0.05). Bifidobacterium and Lactobacillus increased by 41.68% and 35.55%, respectively, in the EM groups compared with the control group, and Bacteroides, Clostridium, Escherichia, and Streptococcus decreased by 24.96, 46.37, 25.00, and 34.05%, respectively, in the EM groups compared with the control group (p<0.05). Compared with the control group, total organic acids, acetic acid, and propionic acid increased by 31.11, 49.34, and 24.88%, whereas butyric acid, isobutyric acid, valeric acid, and isovaleric acid decreased by 30.79, 72.64, 32.90, and 63.16% respectively, in the EM groups (p<0.05). These results suggest that EM has a bifidogenic effect on immune cell development, blood lipid levels, and abdominal fat reduction by increasing the production of organic acid and numbers of cecal microorganisms in animals.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.06a
• /
• pp.121-147
• /
• 1996

Since 1980, the water quality of ultra-pure water has been rapidly improved, and presently ultra-pore water producing equipment for 64Mbit is in operation. Table 1 shows the degree of integration of DRM and required water quality exlmple. The requirements of the ultra-pure water for 64Mbit are resistivity: 18.2 MQ/cm or higher, number of particulates: 1 pc/ml or less (0.05 $\mu$m or larger). bacteria count: 0.1 pc/l or less. TOC (Total Organic Carbon, index of organic snbstance) : 1ppb or less, dissolved oxygen: 5ppb or less, silica: 0.5ppb or less, heavy metal ions: 5ppb or less. The effect of metals on the silicon wafer has been well known, and recently it has been reported that the existence of organic substance in ultra-pure water is closely related to the device defect, drawing attention. It is reported that if organic substance sticks to the natural oxidation film, the oxide film remaims on the organic substance attachment in the hydrofluoric acid treatment (removal of natural oxidation film). The organic substance forms film on the silicon wafer, and harmful elements such as metals and N.P.S., components contained in the organic substance and the bad effect due to the generatinn of silicon carbide cannot be forgotten. In order to remove various impurities in raw water, many technological develoments (membrane, ion exchange, TOC removal, piping material, microanalysis, etc.) have been made with ultra-pure water producing equipment and put to practical use. In this paper, technologies put to practical use in recent ultra-pure vater producing equimeut are introduced.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.347-352
• /
• 2014

Film thickness dependent nanostructure evolution by a post annealing was investigated in poly (3-hexylthiophene):phenyl-C61-butyric acid methyl ester(P3HT:PCBM) films for organic solar cells which were fabricated by dichlorobenzene(DCB) solvent. In case of a 70nm thin film, the thermal annealing process affected to slight increment of the P3HT crystals in the surface region. On the other hand, large number of small sized P3HT crystals near the surface region was formed in the 200nm thick film. The solar cell devices showed the 3% power conversion efficiency(PCE) in 1:0.65 and 1:1 ratio(by weight) of P3HT and PCBM in 70nm and 200nm thickness conditions, respectively. Despite to the similar PCE, the short circuit current Jsc was different in 70nm and 200nm devices, which was related to the different nanostructure of P3HT:PCBM after thermal annealing.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2109-2113
• /
• 2014

Solvent extraction of Fe(III) from chloride solution by using a mixture of D2EHPA (Di-(2-ethylhexyl)-phosphoric acid) and TBP (Tri-butyl phosphate) and the reductive stripping of Fe(III) from the loaded organic were investigated. Quantitative extraction of Fe(III) from the solution (Fe concentration = 90 g/L) was accomplished in two cross-current extraction stages by using the mixture of D2EHPA and TBP. In order to facilitate the stripping efficiency, a reductive stripping method was employed by using $H_2SO_3$ or $Na_2SO_3$ as a reducing agent. The addition of $H_2SO_4$ into reducing agents led to improvement in the stripping efficiency while high concentration acid would suppress it. Both of the mixtures of $H_2SO_4+H_2SO_3$ and $H_2SO_4+Na_2SO_3$ showed good efficiency for the stripping of Fe(III), while the latter was recommended as the stripping solution based on the economics and experimental condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.943-946
• /
• 2004

We have investigated to observe the photoisomerization using the mixture solutions in chloroform and LB monolayers mixed with DPPA and BASH containing azobenzene group which has reversible to cis-trans by light irradiation.. Spreading solutions for the LB films were Prepared in chloroform($5.0{\times}10^{-5}mol/L$). We investigated the photoisomerization and property of the organic ultra thin film of fatty acid containing azobenzene was Prepared on the glass plate by LB method. As a result, the absorption spectra of 8A5H and DPPA mixture of LB films was induced to photoisomerization by alternating irradiation of ultraviolet and visible light, because the condensation of pure azobenzene monolayers was loosened by the introduction of phospholipid into the monolayers, and the molecular high aggregation in pure azobenzene monolayers is also weakened by the introduction of phospholipid. We found that it was reversibly induced to cis-trans photoisomerization in a various mixture molar ratio.