• KSBB Journal
• /
• 제27권3호
• /
• pp.161-166
• /
• 2012

The purpose of this work was to examine the antibacterial activity derived from a lactic acid bacterium isolated from korean rice wine, called makgeolli. Various physiological and biochemical properties of this strain were characterized. Both the BIOLOG system and phylogenetic analysis using 16S rRNA sequencing were utilized for identification, and the strain was designated as Lactobacillus casei HK-9, and registered in GenBank as [JQ951606]. Growth rate, production of organic acids (e.g., lactic acid and acetic acid), and pH changes during growth were monitored. The maximum concentrations of lactic acid and acetic acid were approximately 576 mM and 199 mM, respectively, and pH was changed from 7.00 to 3.74 after 72 h of incubation. HPLC was used to confirm the production of lactic acid and acetic acid. Significant antimicrobial activity of the concentrated supernatant was demonstrated against various food-poison causing bacteria (e.g., Bacillus cereus, Listeria monocytogenes, Staphylococcus aureus, methicillin-resistant Staphylococcus aureus, Escherichia coli, Salmonella enteritidis). Ethanol tolerance of L. casei HK-9 showed up to 12% of ethanol within the culture.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.19.1-19.1
• /
• 2010

The process of manufacturing printed electronics using printing technology is attracting attention because its process cost is lower than that of the conventional semiconductor process. This technology, which offers both a lower cost and higher productivity, can be applied in the production of organic TFT (thin film transistor), solar cell, RFID(radio frequency identification) tag, printed battery, E-paper, touch screen panel, black matrix for LCD(liquid crystal display), flexible display, and so forth. In general, in order to implement printed electronics, narrow width and gap printing, registration of multi-layer printing by several printing units, and printing accuracy of under $20\;{\mu}m$ are all required. These electronic products require high precision to the degree of tens of microns - in a large area with flexible material, and mass productivity at low cost. As such, the roll-to-roll printing process is attracting attention as a mass production system for these printed electronic devices. For the commercialization of this process, two basic electronic ink technologies, such as conductive ink and polymers, and printing equipment have to be developed. Therefore, this paper addressed basis design and test to develop fine patterning equipment employing the roll-to-roll printing equipment and electronic ink.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.407-410
• /
• 2002

Strain YJ는 혐기 발효에서 glucose를 이용하여 복합 유기산 및 수소를 생산하였다. 2% glucose를 이용할 때 총 38ml의 수소가 생산되었으며, pH 완충제인 인산염을 첨가시켰을 경우 1.21배의 수소가 증가되었다. 4% sucrose를 기질로 이용하였을 때 총 40.5ml의 수소를 생산하였으며, 5% fructose에서 38.1ml의 수소를 생산하였다. Glucose를 이용할 때 이 균주는 butyrate, propionate를 많이 축척하였고, acetate, formate등이 소량 검출되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권1호
• /
• pp.130-136
• /
• 2011

Methane is known to be one of the major greenhouse gases. On a global scale, livestock farming may contribute 18% of total greenhouse gas emissions. Though methane contribution is less than 2% of all the factors leading to global warming, it plays an important role because it is 21 times more effective than carbon dioxide. Methane emission is a direct result of the fermentation process performed by ruminal microorganisms and, in particular, the archael methanogens. Reducing methane emission would benefit both ruminant production and the environment. Methane generation can be reduced by electron-sink metabolic pathways to dispose of the reducing moieties. An alternative way for methane control in the rumen is to apply inhibitors against methanogens. Generating methane from manure has considerable merit because it appears to offer at least a partial solution to two pressing problems-environmental crisis and energy shortage. An obvious benefit from methane production is the energy value of the gas itself. Control of methane emission by rumen microbes in Korea has mainly been focused on application of various chemicals, such as BES and PMDI, that inhibit the growth and activity of methanogens in the rumen. Alternatives were to apply long-chain polyunsaturated fatty acids and oils with or without organic acids (malate and fumarate). The results for trials with methane reducing agents and the situation of biogas production industries and a typical biogas plant in Korea will be introduced here.

• Journal of Dairy Science and Biotechnology
• /
• 제36권1호
• /
• pp.1-13
• /
• 2018

Kefir exhibits antimicrobial activity in vitro against gram-positive and gram negative bacteria, as well as some fungi. The ability of LAB to inhibit the growth of closely related bacteria is well known. This inhibition of pathogenic and spoilage microbes may be due to the production of organic acids, hydrogen peroxide, acetaldehyde, diacetyl, carbon dioxide, or bacteriocins. Lactobacilli are the major contributors to acid production and, hence, a determining factor in the flavor development in kefir. Lactic acid, proteolytic activity, and acetaldehyde are the essential flavor compounds in kefir. Both acid and bacteriocins contribute to the antimicrobial activity of kefir and kefir grains. Kefir is rich in proteins, calcium, vitamin $B_{12}$, niacin, and folic acid. Many studies have investigated the benefits of consuming kefir and have shown that it is a natural probiotic, which when consumed regularly, can help relieve intestinal disorders, promote bowel movement, reduce flatulence, and improve the overall health of the digestive system. Tibetan kefir, which is different from traditional kefir, is produced in China. It has been reported to exhibit antimicrobial activity that is nearly identical to that of traditional kefir. Kefir production is considered a rapidly growing food industry in China.

• Journal of Microbiology and Biotechnology
• /
• 제26권1호
• /
• pp.190-196
• /
• 2016

In this study, the Brucella abortus ohr gene coding for an organic hydroperoxide resistance protein (Ohr) was cloned into a maltose fusion protein expression system (pMAL), inserted into Escherichia coli, and purified, and its immunogenicity was evaluated by western blot analysis using Brucella-positive mouse sera. The purified recombinant Ohr (rOhr) was treated with adjuvant and injected intraperitoneally into BALB/c mice. A protective immune response analysis revealed that rOhr induced a significant increase in both the IgG1 and IgG2a titers, and IgG2a reached a higher level than IgG1 after the second and third immunizations. Additionally, immunization with rOhr induced high production of IFN-γ as well as proinflammatory cytokines such as TNF, MCP-1, IL-12p70, and IL-6, but a lesser amount of IL-10, suggesting that rOhr predominantly elicited a cell-mediated immune response. In addition, immunization with rOhr caused a significantly higher degree of protection against a virulent B. abortus infection compared with a positive control group consisting of mice immunized with maltose-binding protein. These findings showed that B. abortus rOhr was able to induce both humoral and cell-mediated immunity in mice, which suggested that this recombinant protein could be a potential vaccine candidate for animal brucellosis.

• 한국대기환경학회지
• /
• 제23권3호
• /
• pp.353-363
• /
• 2007

To differentiate temperature effect from the light intensity effect on the formation of secondary products during the photooxidation of toluene-$NO_x$-air mixtures, steady-state air temperature was changed from $20^{\circ}C\;to\;33^{\circ}C$ at the same light intensity of $0.39min^{-1}$ in an indoor smog chamber. Smog chamber consisted of 64 blacklights and a $5.8m^3$ reaction bag made of Teflon film. Air temperature was controlled by an air-conditioning system. The starting time for rapid conversion of NO to $NO_2$ was slightly delayed with decreasing air temperature. In contrast to light intensity effect, the ozone formation time and the ozone production rate were insensitive to air temperature. Although the formation time for secondary organic aerosols was not changed, the particle number concentration increased with temperature. However, the newly formed secondary organic aerosol mass at lower temperature was higher than that at higher temperature. Since light intensity significantly affected the starting time and quantity of ozone and aerosol formation, it is considered that the temperature could contribute partly the quantity of aerosol formation during the photooxidation of toluene-$NO_x$-air mixtures.

• 한국축산시설환경학회지
• /
• 제11권2호
• /
• pp.97-102
• /
• 2005

Anaerobic decomposition is one of the most common processes in nature and has been extensively used in waste and wastewater treatment for several centuries. New applications and system modifications continue to be adapted making the process either more effective, less expensive, or suited to the particular waste in question and the operation to which it is to be applied. Animal manure is a highly biodegradable organic material and will naturally undergo anaerobic fermentation, resulting in release of noxious odors, such as in manure storage pits. Depending on the presence or absence of oxygen in the manure, biological treatment process may be either aerobic or anaerobic. Under anaerobic conditions, bacteria carry on fermentative metabolisms to break down the complex organic substances into simpler organic acids and then convert them to ultimately formed methane and carbon dioxide. Anaerobic biological systems for animal manure treatment include anaerobic lagoons and anaerobic digesters. Methane and carbon dioxide are the principal end products of controlled anaerobic digestion. These two gases are collectively called biogas. The biogas contains $60\~70\%$ methane and can be used directly as a fuel for heating or electrical power generation. Trace amounts of ammonia and hydrogen sulfide ($100\~300\;ppm$) are always present in the biogas stream. Anaerobic lagoons have found widespread application in the treatment of animal manure because of their low initial costs, ease of operation and convenience of loading by gravity flow from the animal buildings. The main disadvantage is the release of odors from the open surfaces of the lagoons, especially during the spring warm-up or if the lagoons are overloaded. However, if the lagoons are covered and gases are collected, the odor problems can be solved and the methane collected can be used as a fuel. Anaerobic digesters are air-tight, enclosed vessels and are used to digest manure in a well-controlled environment, thus resulting in higher digestion rates and smaller space requirements than anaerobic lagoons. Anaerobic digesters are usually heated and mixed to maximize treatment efficiency and biogas production. The objective of this work was to review a current anaerobic biological treatment of animal manure for effective new technologies in the future.

• 한국환경과학회지
• /
• 제14권2호
• /
• pp.157-165
• /
• 2005

This study was conducted to determine optimum design parameters in nitrification and denitrfication of chemical fertilizer wastewater using pilot plant, Jet Loop Reactor. The chemical fertilizer wastewater which contains low amounts of organic carbon and has a high nitrogen concentration requires a post-denitrfication system. Organic nitrogen is hydrolyzed above $86\%$, and the concentration of organic nitrogen was influent wastewater 126mg/L and of effluent wastewater 16.4mg/L, respectively. The nitrification above $90\%$ was acquired to TKN volumetric loading below $0.5\;kgTKN/m^3{\cdot}d$, TKN sludge loading below $0.1\;kgTKN/kgVSS{\cdot}d$ and SRT over 8days. The nitrification efficiency was $90\%$ or more and the maximum specific nitrification rate was $184.8\;mgTKN/L{\cdot}hr$. The denitrification rate was above $95\%$ and the concentration of $NO_3-N$ was below 20mg/L. This case was required to $3\;kgCH_3OH/kgNO_3-N$, and the effluent concentration of $NO_3^--N$ was below 20mg/L at $NO_3^--N$ volumetric loading below $0.7\;kgNO_3^--N/m^3{\cdot}d$ and v sludge loading below $0.12\;kgNO_3^-N/kgVSS{\cdot}d$. At this case, the maximum sludge production was $0.83\;kgTS/kgT-N_{re}$ and the specific denitrfication rate was $5.5\;mgNO_3-N/gVSS{\cdot}h$.

• 유기물자원화
• /
• 제12권2호
• /
• pp.52-60
• /
• 2004

본 연구는 슬러지처분을 위해서 유기성페기물 감량화, 에너지 회수기술 공정시도, 자연순환형 슬러지 처분을 위한 최종 시스템개발의 기초연구이다. 본 연구는 full-규모의 건조시스템과 반자동식 로타리 킬른식 열분해로를 이용하여 실험하였다. 운전매개변수는 온도를 건조는 $160{\sim}175^{\circ}C$와 열분해온도는$450{\sim}800^{\circ}C$로 변화시켜 실험을 실행하였고, 고형물의 열분해 공정의 체류시간은 9min으로 실험을 t실행하였다. 본 연구에서 중요한 실험매개변수는 운전시간, 슬러지 수분함량, 고형물량에 따라 온도를 변화시켜 열분해특성을 연구하였다. 운전시간 9분의 일정한 상태에서 $670^{\circ}C$조건은 탄소쇄 $C_1{\sim}C_3$의 물질의 생성은 증가하였지만, $C_4{\sim}C_6$를 함유한 오일성분은 감소하는 것으로 나타났다.