• 제목/요약/키워드: Organic Form

검색결과 988건 처리시간 0.029초

Effect of Organic Acids on Cr(III) Oxidation by Mn-oxide

  • Chung, Jong-Bae
    • Applied Biological Chemistry
    • /
    • 제41권4호
    • /
    • pp.241-245
    • /
    • 1998
  • Two oxidation states of chromium commonly occur in natural soil/water systems, Cr(III) and Cr(VI). The oxidized form, Cr(VI), exists as the chromate ion and is more mobile and toxic than Cr(III). Therefore oxidation of Cr(III) by various Mn-oxides in natural systems is a very important environmental concern. Organic substances can inhibit the Cr(III) oxidation by binding, Cr(III) strongly and also by dissolving Mn-oxides. Most of Cr(III) oxidation studies were carried out using in vitro systems without organic substances which exist in natural soil/water systems. In this study effect of organic acids - oxalate and pyruvate - on Cr(III) oxidation by $birnessite({\delta}-MnO_2)$ was examined. The two organic acids significantly inhibited Cr(III) oxidation by birnessite. Oxalate showed more significant inhibition than pyruvate. As solution pH was lowered in the range of 3.0 to 5.0, the Cr(III) oxidation was more strongly depressed. Addition of more organic acids reduced the Cr(III) oxidation mare extensively. Different inhibition effects by the organic acids could be due to their ability of reductive dissolution of Mn-oxides and/or Cr(III) binding. Organic acids dissolved Mn-oxide during the Cr(III) oxidation by the oxide, Dissolution by oxalic acid was much greater than that by pyruvate, and the dissolution was more extensive at lower pH. Inhibition of Cr(III) oxidation was parallel to the dissolution of Mn-oxide by organic acids. Although the effect of Cr(III) binding by organic acids on Cr(III) oxidation is not known yet, Mn-oxide dissolution by organic acids could be a main reason for the inhibition of Cr(III) oxidation by Mn-oxide in presence of organic acids. Thus oxidation of Cr(III) to Cr(VI) by various Mn-oxides in natural systems could be much less than the oxidation estimated by in vitro studies with only Cr(III) and Mn-oxides.

  • PDF

전신형태 진단의 의의와 활용에 대한 연구 (Study on the Significance and Application of the whole Body-form Diagnosis)

  • 김경철;신순식;이용태
    • 동의생리병리학회지
    • /
    • 제16권5호
    • /
    • pp.873-880
    • /
    • 2002
  • We study on the significance and application of the whole body form diagnosis. The results were as follows; The general form diagnosis is the method to observe the individual physiology and pathology. The phase of thinking, the current and activity of KI, the pattern of general form diagnosis have organic relations with the symptoms. The general form diagnosis is made up the principle of the imaging phase, therefore it must make synthetic union the differentiation of syndromes. The general form diagnosis of NAE GYEONG shows the typical phases and it is divided with the sight of YIN YANG and Five-Element. The general form diagnosis of SEOP GAE is practiced the theory of constitution's demonstration before the understanding of symptoms. Then JANG NAM tried the type of constitution's demonstration. The general form diagnosis of DONG MU becomes the diagnostic root of constitution's demonstration in four type constitution theory.

디자인의 형태와 기능에 관한 연구 (Essay on Form and Function Design)

  • 이재국
    • 디자인학연구
    • /
    • 제2권1호
    • /
    • pp.63-97
    • /
    • 1989
  • There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

  • PDF

Challenges and Opportunities for Agribusiness Development: Lesson from Indonesia

  • SOETRIONO, Soetriono;SOEJONO, Djoko;HANI, Evita Soliha;SUWANDARI, Anik;NARMADITYA, Bagus Shandy
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제7권9호
    • /
    • pp.791-800
    • /
    • 2020
  • This study aims to determine the technical aspects of organic food systems in rice agribusiness and analyze the pattern of economic and institutional structures of agribusiness in East Java of Indonesia. Also, this study investigates the feasibility of farming and understands the strategies of rice agribusiness development. This study was conducted in several places in East Java of Indonesia, covering the district of Blitar, Kediri, Bondowoso, Tulungagung, and Malang. The data were collected through a structured questionnaire and focus group discussion. Furthermore, the data were analyzed using efficiency analysis, revenues analysis, and SWOT analysis. The findings indicated that, technically, the district of Bondowoso, Malang, Kediri, and Tulungagung had implemented the organic systems, while the district of Blitar applied under semi-organic systems. The pattern of economic institutions of agribusiness commodity consists of the production facility, farming, post-harvest and product processing, marketing, and support services institutional. These results showed that the organic rice farming is economically viable, and the government support was provided in the form of the establishment of development centers, the facilitation of agricultural machines, integrated crop management field school, and the organic certification. These findings suggest that several places in East Java have prospective opportunities for production of rice agribusiness development.

Au/Titania Composite Nanoparticle Arrays with Controlled Size and Spacing by Organic-Inorganic Nanohybridization in Thin Film Block Copolymer Templates

  • Li, Xue;Fu, Jun;Steinhart, Martin;Kim, Dong-Ha;Knoll, Wolfgang
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권6호
    • /
    • pp.1015-1020
    • /
    • 2007
  • A simple approach to prepare arrays of Au/TiO2 composite nanoparticles by using Au-loaded block copolymers as templates combined with a sol-gel process is described. The organic-inorganic hybrid films with closely packed inorganic nanodomains in organic matrix are produced by spin coating the mixtures of polystyrene-block-poly(ethylene oxide) (PS-b-PEO)/HAuCl4 solution and sol-gel precursor solution. After removal of the organic matrix with deep UV irradiation, arrays of Au/TiO2 composite nanoparticles with different compositions or particle sizes can be easily produced. Different photoluminescence (PL) emission spectra from an organic-inorganic hybrid film and arrays of Au/TiO2 composite nanoparticles indicate that TiO2 and Au components exist as separate state in the initial hybrid film and form composite nanoparticles after the removal of the block copolymer matrix.

Vapor Deposition Polymerization(VDP)을 이용한 페시베이션이 유기박막트렌지스터에 주는 영향 (Effects of Organic Passivation Layers by Vapor Deposition Polymerization(VDP) for Organic Thin-Film Transistors(OTFTs))

  • 박일흥;형건우;최학범;김재혁;김우영;김영관
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.114-115
    • /
    • 2007
  • In this paper, it was demonstrated that organic thin-film transistors (OTFTs) were fabricated with the organic passivation layer by vapor deposition polymerization (VDP) processing, In order to form polymeric film as an passivation layer, VDP process was also introduced instead of spin-coating process, where polymeric film was co-deposited by high-vacuum thermal evaporation from 6FDA and ODA followed by curing, Field effect mobility, threshold voltage, and on-off current ratio with 450-nm-thick organic passivation layer were about $0.21\;cm^2/Vs$, IV, and $1\;{\times}\;10^5$, respectively.

  • PDF

Polymorphism of Doxazosin Mesylate

  • Sohn Young-Taek;Lee Yoon-Hee
    • Archives of Pharmacal Research
    • /
    • 제28권6호
    • /
    • pp.730-735
    • /
    • 2005
  • Nine polymorphic modifications of doxazosin mesylate have been obtained by recrystallization in organic solvents under variable conditions. Different polymorphs of doxazosin mesylate were characterized by powder X-ray crystallography diffractometry (PXRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TG). Transformation of Form 1 and Form 2 was not occurred in three relative humidities ($0\%$, $51\%$, and $99\%$) at 20$\pm$0.5 for 30 days.

세프라딘의 용출에 미치는 결정형의 영향 (Effects of Crystal Forms on Dissolution of Cephradin)

  • 손영택;김지선
    • Journal of Pharmaceutical Investigation
    • /
    • 제28권2호
    • /
    • pp.115-119
    • /
    • 1998
  • Five polymorphic modifications of Cephradin were prepared by recrystallization from organic solvents. The isolated crystal forms were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and X-ray crystallography powder diffractometry. Modificaition 1 was the most stable form and decomposed at $201.3^{\circ}C$. Modification 3 and 4 were metastable. The dissolution of modification 3 and 4 was faster than that of marketed form.

  • PDF

세푸록심 악세틸의 결정형 (Crystal Form of Cefuroxime axetil)

  • 김보연;손영택
    • Journal of Pharmaceutical Investigation
    • /
    • 제37권1호
    • /
    • pp.23-26
    • /
    • 2007
  • Two crystal forms of cefuroxime axetil were obtained by the recrystallization from different organic solvents and characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD). It was confirmed that two crystal forms are identical. The dissolution patterns of these two forms were also checked in 0.07 N HCl at $37{\pm}0.5^{\circ}C$, 100 rpm for 180 minutes. The transformation during storage was also studied.

라이트와 이토 건축의 유기적 개념과 해석 특성에 관한 연구 - 라이트의 로비 하우스와 이토의 센다이 미디어 테크를 중심으로 - (A Study on the Characteristics of Organic Concept and Interpretation at F. L. Wright and T. Ito's Architecture - Focus on Wright's Robie House and Ito's Sendai Mediatheque -)

  • 박형진
    • 한국실내디자인학회논문집
    • /
    • 제22권4호
    • /
    • pp.23-32
    • /
    • 2013
  • This study represents something in common and differences of organic characteristics between early modern architecture and contemporary architecture analysing F. L. Wright's Robie House and Toyo Ito's Sendai Mediatheque. A natural organic body cannot be separated from the natural environment, and each part of an architecture has each own property and forms a whole at the same time. That is a basic concept of organic architecture, and a framework for analysis is set up based on it. The followings are similarities and differences of organic concept and interpretation between Wright's Robie House and Ito's Sendai Mediatheque First, Wright' Robie house unites with the natural surrounding, using a physically close connection to the ground. In contract, Ito's Mediatheque shows characteristics of noncentural and fluidic space that are metaphorically reflecting tangible and intangible of factors in modern city, where there is an ambiguous physical boundary between architecture and urban environment. Next, floors, walls and ceilings of Wright's housing as for basic building blocks are physically separated and at the same time form formative unity from the point of view of a physical and structural organic body. And continuous flow of faces of separated walls form an organism united with the nature from a physical aspect. On the contrary to this, there is an no-boudary and floating organic architecture of integrated structure from ambiguous setting of relation between architecture and urban space in Ito's architecture. Especially, Mediatheque shows semantic integration of floating urban environmental factors through horizontal and vertical integration of horizontal slabs, vertical pipes, and skins. Last, horizontal and vertical factors of Wright' Housing is appreciated as an basic experienced structure in terms of spacial perception and fluidic inner spaces in Wright's housing is completed with a series of spatial experiences in a visual sense. On the other hand, no-boundary and floating space of Ito's architecture accept user's physical and virtual body. Especially, there is an integration transcending beyond time and space, accepting an imaginary body and events with the course of time at Ito's Mediatheque.