• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.5
• /
• pp.114-124
• /
• 2000

The method to estimate agricultural organic matter flow on the regional scale was established and applied to a rural area in Chongwon-gun, Chungbok in 1996. The study area is of about 67$\textrm{km}^2$ and its population is about 7,000. The stocks and flows of organic matter are represented in dry weight per unit area and dry weight per unit area per year, respectively. the amount of inflow of organic matter indicates a possibility to cause environmental pollution. the amount of animal waste 767 kg/ha/yr account for 42 percent of total amount of organic waste 1,834 kg/ha/yr and therefore the environment in study area is greatly influenced by livestock. The decrease in recycling rate of animal waste form 100% to 70% has greatly increased the amount of disposal waste nearly twice, i.e., from 267 kg/ha/yr to 497kg/ha/yr . The results of this study demonstrate that appropriate animal population, increase in recycling of animal waste and preservation of agricultural land are necessary for environmental conservation of the study area.

• Asian Journal of Turfgrass Science
• /
• v.5 no.2
• /
• pp.81-86
• /
• 1991

The sludge, a waste of brewery industries, was examined for potentials as a natural organic fertilizer (or soil conditioner) for lawn. Trial products were measured for changes of physical, chemical properties in laboratory and seed germination and seedling growth in green house were also tested. The results are as the following:1The sludge from distilled liquor brewery contained high quantity of organic matter which had proper physical and chemical properties for lawn fertilizer (natural organic fertilizer, soil conditioner, top-dressing mix) . It showed good characteristics in handling and capabilities to be developed as commercial products for golf courses. 2.Sludge from beer company needs proper treatment to improve physical properties for futher degradiation. It is because aggregation of the sludge particles prevented microbial activities and changing to soluble form. 3.Green carbon can be used as carbon source for organic fertilizer production using brewery sludge, but it should not contain wood extract which inhibit seed germination and seedling growth.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.81-85
• /
• 2002

Three polymorphic modifications of CKD-602, water soluble derivative of camptothecin, were obtained by the recrystallization from different organic solvents and characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and X-ray powder diffraction (XRPD). The major endothermic peaks of the DSC curve of Form 1, Form 2 and Form 3 was shown at $268.71^{\circ}C$, $247.83^{\circ}C$, $244.76^{\circ}C$, respectively. Form 2 was elucidated to be an acetic acid solvate and Form 3 was elucidated to be a methanol solvate. The dissolution patterns of these three modifications were also checked in distilled water at $37{\pm}0.5^{\circ}C$, for 30 minutes. The polymorphic modifications showed differences in the dissolution rate. The dissolution rate of Form 1 was faster than that of other polymorphic modifications. When stored at different relative humidity over the period of 3 months, all of the polymorphic modifications did not undergo transformation.

• Journal of Pharmaceutical Investigation
• /
• v.33 no.2
• /
• pp.99-103
• /
• 2003

Four different crystal forms of prednisolone, two polymorphic forms and two pseudopolymorphic forms, were obtained by the recrystallization from different organic solvents under varying conditions. The isolated crystal forms were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and X-ray powder diffraction (XRD). Form 1 was the most stable form that had the highest melting point and melt at $250.1^{\circ}C$. Form 2 was a monohydrate and Form 3 was a methanol solvate. The endothermic peak of Form 4 was shown at $230.2^{\circ}C$. When stored at different relative humidity over the period of 3 months, all of the modifications did not undergo transformation. The dissolution patterns of these four modifications were also checked in distilled water at $37{\pm}0.5^{\circ}C$, for 120 minutes. The dissolution rate of Form 4 was highest and those of Form 3, Form 2, Form 1 followed. Form 2, Form 3 and Form 4 had higher dissolution rate than Form 1.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.727-730
• /
• 2015

In this paper, we fabricated organic compounds detector using the MWCNT/PMMA (multi-walled carbon nanotube / polymethylmethacrylate) composite film. We used polymer film as a matrix material for the device framework, and introduced CNTs for reacting with the organic compounds resulting in changing electrical conductivity. Spray coating method was used to form the MWCNT/PMMA composite film detector, and pattern formation of the detector was done by shadow mask during the spray coating process. We investigated changes of electrical conductivity of the detector before and after the organic compounds exposure. Electrical conductivity of the detector tended to decrease after the exposure with various organic compounds such as acetone, tetrahydrofuran (THF), toluene, and dimethylformamide (DMF). Finally we conclude that organic compounds detection by the MWCNT/PMMA composite film detector was possible, and expect the feasibility of commercial MWCNT/PMMA composite film detector for various organic compounds.

• Journal of the Korea Furniture Society
• /
• v.25 no.3
• /
• pp.188-197
• /
• 2014

This study aimed to develop organic design and propose references on an origin and developing factors of the organic design as looking into previous researches on furniture design. Expressive features with curves observed in the furniture design have been interpreted as organic meanings, and the study also approached grounds for the organic design elements while talking about developments of new materials and digital technology. In addition, the study presented a possibility explaining that these organic design elements might have been derived and developed from Art Nouveau. State-of-the art technology of the digital era in the 21st century has been built upon more creative concepts, and as this technology gets combined with the digital technology, it is, now, changing but also improving both morphological aspects and design methodologies. In the midst of this change, when it comes to factors to develop the organic design, creation of various new materials and state-of-the art digital technology are considered to be immediate factors to changes in the design. As morphological thinking using digital media develops, geometric thinking and such form are realized which eventually would lead us to furniture design of a new concept.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.473-473
• /
• 2011

In recent years, organic thin film transistors OTFTs based on conductive-conjugated molecules have received significant attention. We report a fabrication of organic single crystal nanowires that made on Si substrates by liquid bridge-mediated nanotransfer molding (LB-nTM) with polyurethane acrylate (PUA) mold. LB-nTM is based on the direct transfer of various materials from a stamp to a substrate via a liquid bridge between them. In liquid bridge-transfer process, the liquid layer serves as an adhesion layer to provide good conformal contact and form covalent bonding between the organic single crystal nanowire and the Si substrate. Pentacene is the most promising organic semiconductors. However pentacene has insolubility in organic solvents so pentacene OTFTs can be achieved with vacuum evaporation system. However 6, 13-bis (triisopropylsilylethynyl) (TIPS) pentacene has high solubility in organic solvent that reported by Anthony et al. Furthermore, the substituted rings in TIPS-pentacene interrupt the herringbone packing, which leads to cofacial ${\pi}-{\pi}$ stacking. The patterned TIPS-Pentacene single crystal nanowires have been investigated by Atomic force microscopy (AFM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and electrical properties.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.E
• /
• pp.27-40
• /
• 1998

The solubility characteristics of organic compounds were studied in terms of the extraction efficiency as a function of the polarity of the organic solvent, and the acidity of water in urban aerosol samples collected in University of East Anglia (UEA), Norwich, England. The extraction efficiency of organic compounds were evaluated with respect to the organic carbon, -nitrogen and -hydrogen by means of a wide range of solvent which include polar and nonpolar organic solvents as well as acids and alkaline water. In addition, after being dissolved in aqueous solution, the aqueous chemistry of organic compounds were studied in terms of the organic metal complexes in aerosol, which were studied with oxalic acid, copper, and zinc. The results of this study indicate that solubility characteristics of organic compounds depend on the polarity of the solvents and the acidity of the solvents. In particular, some organic compounds are water soluble, even though they are much smaller than acetone soluble fractions. In the comparison between polar organic solvent extraction and non- polar organic solvent extraction, it can be thought that significant fraction of organic compounds analysed in the aerosol samples, are polar organic compounds because of the higher extraction efficiencies of organic compounds in polar organic solvent extraction than in nonpolar organic solvent extraction. Regarding the study of the oxalic -metal complexes, it can be thought that most oxalic acids are present in the form of oxalic -copper complexes in the aerosols collected at UEA.

• Lingua Humanitatis
• /
• v.2 no.1
• /
• pp.259-284
• /
• 2002

In the history of cinema, Sergei Eisenstein is always considered as a pioneer to conceive of cinema primarily as a form of expressing thought rather than as a representation of reality. For him, montage is the indispensable method to construct an open totality of thought and image in movement. It functions as a basic thread running through two poles of filmic composition, that is, the organic and the pathetic. The organic is concerned with the composition of the film structure as a whole, while the pathetic is involved in an ongoing process of registering a leaping point in various filmic sequences. The ultimate goal of montage for Eisenstein is to create the cinema of ideas which can synthesize both emotional and intellectual elements in the filmic composition. In his system of intellectual cinema, the identity of image and thought externalizes the sensory-motor unity of nature and man along the ascending spiral of centrifugal force of the film. Indeed, in both theory and practice, Eisenstein firmly argues that nature not only provides basic laws for the organic composition of the film, but also expresses itself in the form of the whole which brings out the experience of totality in the film text, the audience, and surely Eisenstein himself.

• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.89-93
• /
• 2013

The electrochemical study has been enjoyed in many areas of chemistry. Through this approach using electrochemical measurement, empirical HOMO and LUMO values can be calculated by three methods such as absorption measurement, cyclicvoltammetry and computational calculations. In this study, 1,3-bisdicyanovinylindane was prepared and investigated toward its optical properties. The absorption intensities were changed depending on changes of pH. These absorption changes are induced by resonance form of 1,3-bisdicyanovinylindane. The electron delocalization in ${\pi}$ system is related to the resonance form. In according to this electron density distribution and HOMO/LUMO values of 1,3-bisdicyanovinylindane were simulated and calculated by Material Studio 4.3, absorption measurement and cyclicvoltammograms. The 1,3-bisdicyanovinylindane is one of the most attracted acceptor units in D-${\pi}$-A system. This attempt is useful to determine more detailed characteristics of the energy potentials.