• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2974-2978
• /
• 2014

$Mn_3O_4$/multi-walled carbon nanotube (MWCNT) composites are prepared by chemically synthesizing $Mn_3O_4$ nanoparticles on a MWCNT film at room temperature. Structural and morphological characterization has been carried out using X-ray diffraction (XRD) and scanning and transmission electron microscopies (SEM and TEM). These reveal that polycrystalline $Mn_3O_4$ nanoparticles, with sizes of about 10-20 nm, aggregate to form larger nanoparticles (50-200 nm), and the $Mn_3O_4$ nanoparticles are attached inhomogeneously on MWCNTs. The electrochemical behavior of the composites is analyzed by cyclic voltammetry experiment. The $Mn_3O_4$/MWCNT composite exhibits a specific capacitance of $257Fg^{-1}$ at a scan rate of $5mVs^{-1}$, which is about 3.5 times higher than that of the pure $Mn_3O_4$. Cycle-life tests show that the specific capacitance of the $Mn_3O_4$/MWCNT composite is stable up to 1000 cycles with about 85% capacitance retention, which is better than the pure $Mn_3O_4$ electrode. The improved supercapacitive performance of the $Mn_3O_4$/MWCNT composite electrode can be attributed to the synergistic effects of the $Mn_3O_4$ nanoparticles and the MWCNTs, which arises not only from the combination of pseudocapacitance from $Mn_3O_4$ nanoparticles and electric double layer capacitance from the MWCNTs but also from the increased surface area, pore volume and conducting property of the MWCNT network.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.140-145
• /
• 2008

The purpose of this paper is to discuss the fabrication of $\beta$-PVDF($\beta$-Polyvinylidene fluoride, ${\beta}-PVF_2$) organic thin films using the vapor deposition method. Vapor deposition was performed under the following conditions: the temperature of evaporator, the applied electric field, and the pressure of reaction chamber were $270^{\circ}C$, 142.4 kV/cm, and $2.0{\times}10^{-5}\;Torr$, respectively. The molecular structure of the evaporated organic thin films were evaluated by a FT-IR. The results showed that the characteristic absorption peaks of $\beta$-form crystal increase from 72% to 95.5% with an increase in the substrate temperature. In the analysis of the electric characteristics, the abnormal increases in the relative dielectric constant and the dielectric loss factor in the regions of low frequency and high temperature are known to be caused by inclusion of impurity carriers in the PVDF organic thin films. In order to analyze quantitatively the abnormalities in the conductivity mechanism caused by ionic impurities, the product of the ion density and the mobility that affect the electrical property in polymeric insulators is analyzed. In the case of a specimen produced by varying the substrate temperature from $30^{\circ}C$ to $105^{\circ}C$, the product of mobility and the ion density decreased from $4.626{\times}10^8$ to $8.47{\times}10^7/V{\cdot}cm{\cdot}s$. This result suggests that the higher the substrate temperature is maintained, the better excluded the impurities are, and the more electrically stable material can be obtained.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.230-234
• /
• 2011

In this work, the primary material for a single layered hardmask which can afford a spin-on process was prepared by the minture of organic and inorganic sources. The preparation of hybrid polymer was attempted by esterification from silanol terminated siloxane compounds and acetonide-2,2-bis(methoxy)propionic acid. The optical, thermal and morphological properties of the test hardmask film was examined in terms of cross-linking agent and additives. In addition, the etch rate of hardmask film and photo resist layer were compared. The hybrid polymer prepared from organic and inorganic materials was found to be useful for hardmask film to form the nano-patterns.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1725-1732
• /
• 2022

Objective: This study was conducted to investigate the effects of selenium benefits on the physiological responses, litter performance, blood profiles and milk composition of lactating sows and tissue concentration of their progeny when mixed form of selenium was provided in a lactation diet. Methods: A total of 45 multiparous sows (Yorkshire×Landrace) with similar body weight, backfat thickness, and parity were assigned to one of three treatments with 15 sows per treatment in a completely randomized design. Organic and inorganic selenium were mixed and added to the diet at 0.15 ppm and 0.25 ppm, respectively. A non-Se-fortified corn-soybean meal basal diet served as a negative control. Treatments were as follows: i) Control: corn-soybean meal based diet, ii) ISOS15: control+ inorganic Se 0.15 ppm+organic Se 0.15 ppm, iii) ISOS25: control+inorganic Se 0.25 ppm+organic Se 0.25 ppm. Results: Serum selenium concentrations of sows and piglets were increased by the supplemental Se mixture at 7 days of lactation compared with the control (p<0.01, respectively). The kidney and muscle selenium concentrations of piglets were increased by the supplemental Se mixture at 21 days of lactation compared with the control (p = 0.03; p = 0.04, respectively). Conclusion: Consequently, supplementation with mixed inorganic and organic selenium in a lactating diet could improve the selenium status of sows and piglets; no differences were observed among the mixing levels.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.116-121
• /
• 2022

OFET have require fine patterning technology for organic semiconductor solution process to be used in actual electronics. In this study, we compared and analyzed the soft lithography method which can form fine patterns more than the conventional spin coating method in order to confirm that it can have better electrical characteristics. The soft lithography method produced a flexible master mold using nano patterns on compact disc surfaces and obtained a 650 nm wide 2,7-Dioctyl [1] benzothieno [3,2-b] [1] benzo thiophene (C_8-BTBT) nanowires. As a result, the field-effect mobility of devices fabricated by the spin coating method was 0.0036 cm²/Vs and mobility of devices produced by soft lithography method was 0.086 cm²/Vs, which was about 20 times higher than spin-coated devices and has better electrical performance.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.626-634
• /
• 2005

The objectives of this study was to assess pollution level and contamination status on tailings and soil in the vicinity of four disused metal mines in Kangwon province. As the result of total metal concentrations analysis, the pollution degree of tailings and soil decreased in the order of Wondong > Second Yeonhwa > Sinyemi ${\fallingdotseq}$ Sangdong mines. Total metal concentrations of mine tailings in this study were $1.2{\sim}78.2$ and $1.1{\sim}80.6$ times higher than those in the background soil and the tolerable levels suggested by Kloke, respectively. From these results, we found that tailings served as contamination source of nearby soil. According to sequential extraction of metals, large proportion of heavy metals in all mine tailings existed in the form of a residual fraction, and heavy metals in non-residual form was mainly associated with Fe-Mn oxide fraction and sulfidic-organic fraction. Fe-Mn oxide fraction and sulfidic-organic fraction of heavy metals may be released into and contaminated the nearby environment under the oxidation or reduction condition in long-term. In particular, the proportions of the exchangeable and carbonate fraction of Cd in mine tailings from Second Yeonhwa mine were relatively high. This suggests that Cd may be easily released into and contaminated the nearby environment in the near time. Concentrations of heavy metals in mine tailings and the nearby soil exceeded the standard (agricultural area) of Soil Environment Conservation Law. So it was thought that remediation for mine tailings and the nearby soil is needed. The pollution indices of the samples in this study were for higher than 1.0 and the pollution degree was very serious. Priority remediation site for these mines was Wondong. As Results of danger indices, it was showed that exchangeable form in Wondong and Fe-Mn oxide form in the rest mines should be removed preferentially.

• Composites Research
• /
• v.29 no.4
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF) as a representative polymer with the piezoelectric property has been studied since the 1960s. Crystalline structure of poly(vinylidene fluoride) polymer is composed of five different crystal structure of the polymer as a semi-crystalline. Among the various crystal structures, ${\beta}-type$ crystal exhibits a piezoelectricity because the permanent dipoles are aligned in one direction. Generally ${\beta}-form$ crystal structure can be obtained through the transformation of the ${\alpha}-form$ crystal structure by the stretching and it can increase the amount through the after treatment as poling process after stretching. ${\beta}-form$ crystal structure the PVDF fibers produced by wet spinning is formed through a diffusion mechanism of a polar solvent in the coagulation bath. However, it has a disadvantage that the diffusion path of the solvent remains as pores in the fiber because the fiber solidification occurs simultaneously with the diffusion of the polar solvent. These pores play a role in reducing effect of poling process owing to effect of disturbances acting on the polarization by the electric field. In this work, the drying method using the microwave was introduced to remove more effectively the residual solvent and the pore within PVDF fibers produced through wet-spinning process and piezoelectric PVDF fibers was produced by transformation of the remaining ${\alpha}$ form crystal structure into ${\beta}-crystal$ structure through the stretching process.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.197-203
• /
• 2018

Biochar is the carbon solid produced through the pyrolysis of a biomass from organic sources such as agricultural waste, animal manure, and sludge under limited or anaerobic conditions. Biochar has the effect of reducing greenhouse gases through the carbon sequestration method; additionally, biochar is known to function as a soil amendment. This experiment was conducted to evaluate the application of biochar on the growth characteristics of Chinese cabbage at Chungnam National University in Daejeon, Korea. The Chinese cabbage was grown for 50 days in a glasshouse in pots. A pruning branch was used to produce the bead and pellet forms of biochar through pyrolysis. The biochar was added to the soil at 0, 2, and 5% by weight. The Chinese cabbage with the 2% treatment of the bead form of biochar had the highest fresh weight ($149.43{\pm}15.92g\;plant^{-1}$) which was increased by 10% compared to the control ($136.91{\pm}31.46g\;plant^{-1}$). Moreover, for the 5% treatment of the bead form of biochar ($60.91{\pm}9.82g\;plant^{-1}$), the growth decreased by 57% compared to the control. As the content of the bead form of biochar increased, the shoot dry weight, leaf number, leaf length and lead width that appeared decreased. An increase in the total organic matter, Avail. $P_2O_5$, Ex. cation and EC was observed when the biochar content was increased. Our results support the application of 2% biochar in the bead form for increased growth of Chinese cabbage.

• Journal of Wetlands Research
• /
• v.14 no.1
• /
• pp.59-73
• /
• 2012

The importance of rice paddy wetland has been raised since the 10th Ramsar Convention in 2010. However, there is shortage of study on the evaluation of rice paddy wetland and also of the study on the effect of organic agriculture on the vegetation characteristics. Accordingly, this study examined the vegetation characteristics of organic rice paddy for the basic resources of evaluating value of rice paddy wetland. 6 places of organic rice paddy and conventional rice paddy were chosen as research targets. It analyzed the function of 'Floral Diversity and Wildlife Habitat' among the revised RAM, an existing wetland evaluation system. As to the factor affecting the analysis result, simple land-use result was proved to determine the evaluation. As a result of vegetation investigation total 176 taxa, 53 families, 146 generics, 148 species, 26 varieties and 1 forma. When the difference of appearance of life form between organic area and conventional area was examined, organic paddy had higher appearance of life form in Therophyte and Megaphanerophyte. For the distribution of Naturalized plants, organic rice paddy had lower naturalized rate and urbanization index than conventional rice paddy. As to the Pearson correlation analysis between growing condition and vegetation characteristics, variety of rice paddy vegetation showed it was not heavily influenced by the land use. However, the organic rice paddy area had more variety in vegetation than conventional rice paddy. There was about 1% correlation with types of Cyperaceae, which means that the classification group of Cyperaceae can be utilized in evaluating rice paddy wetland later on. It is determined that the wetland evaluation has been widely influenced by soil environment, water environment and surrounding natural and artificial landscape as well as vegetation characteristics. Accordingly, further research seems to be required with minute investigation to an extensive area.

• Korean Journal of Organic Agriculture
• /
• v.17 no.3
• /
• pp.393-403
• /
• 2009

This study was conducted to investigate the productivity of Hanwoo steers by feeding self-product organic rice straw and concentrates(conventional, T1 and organic T2). Sixteen Hanwoo steers(8 months on the average) were randomly assigned to two treatment groups. Feeding trail was carried out in 2 treatment(8 heads/ treatment) by Hanwoo steers for 600 days form 8 to 28 months in age. The range of average daily gains of T1 and T2 were 0.76 to 0.77kg in the growing stage, 0.93 to 0.90kg in the first fattening stage, 0.99 to 0.84kg in the middle fattening stage, and 0.59 to 0.64kg in the latter fattening, respectively, and the gains for overall period was higher in T1 than in T2. Concentrates and total digestive nutrients(TDN)(T1) intakes per unit of kg gains were higher than T2 without significant difference. In carcass characteristics, the carcass weight in T1 were higher about 5% than in T2. According to the above results, it may be concluded that dry matter(DM) intakes, crude protein(CP) and TDN contents of feedstuff between treatments was no significant difference. but marbling in T2 score was higher than in T1 about 20%. There were no significant differences rib-eye area, back fat thickness and fat color(p>0.05).