• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.101-106
• /
• 1999

The relationship between primary productivity and changes in water quality was investigated at Mulgum station, a site downstream of the Nakdong River, Korea. Phytoplankton production was characterized by blooms of Microcystis aeruginosa during the summer and Stephanodiscus hantzschii during the winter. Primary production and secondary production by bacterioplankton ranged from 1.5~53.5 mg-C/ι day and 0.1~0.3 mg-C/ι day, respectively. Distribution of total organic carbon appeared to be highly correlated with phytoplankton biomass, especially during blooms of M. aeruginosa, when particulate organic carbon was 81% of total organic carbon and the main source of organic materials supplied into the water. The correlation coefficient between chlorophyll-a and BOD was 0.86. Thus it was concluded that autochthonous phytoplankton mostly affected the BOD level. Total bacterial numbers were also highly correlated with chlorophyll-a ($r^2$= 0.84) and the bacterial community appears to be regulated by phytoplankton biomass in this area.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.2
• /
• pp.68-75
• /
• 2014

This study investigated the potential use of various organic carbon sources (glucose, glycerol and acetate) and different concentrations of $CO_2$ for culturing marine microalga Dunaliella tertiolecta. Cell growth and lipid production were monitored under heterotrophic, mixotrophic and photoautotrophic modes of cultivation. D. tertiolecta showed the ability to grow under mixotrophic (acetate and glucose), heterotrophic (glucose) and photoautotrophic condition under high $CO_2$ concentration (15%). With all the organic carbon sources (glucose, glycerol and acetate) tested in this study, 1~5% acetate enhanced cell growth rate and lipid content, while higher concentrations of acetate (10% and 15%) were inhibitory and resulted in cell death.

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.673-684
• /
• 2012

Quantitative understanding of total carbon, total inorganic carbon and total organic carbon contained in ocean sediments is a basic data for interpretation of oceanic sediment environments. Elemental analyzer(EA) is frequently used for the analysis of carbon contents in inland soils and ocean sediments. Carbon and nitrogen contents of the soil reference material analyzed by an EA were 2.30% and 0.21% with standard deviations of 0.02 and 0.01, respectively. Relative standard deviations were 0.01 and 0.06, respectively, representing a high precision. Regression analysis of TOC and TC analysis results for the samples with TOC of less than 2.0% for the site in Hyung-Do showed a linear relationship with a slope of 0.9743($R^2$=0.9989, n=38), and the results of a relationship regression analysis between total organic carbon contents less than 0.5% and average grain size except for two samples showed a linear relationship with a slope of 0.0444($R^2$=0.6937 n=36). TOC contents of surface sediments were in the ranges of 0.10~1.67%(Average $0.26{\pm}0.37%$) with TOC values of 1.67% at S02 sampling site, 1.13% at S07 sampling site, and less than 1.00% at remaining sites. In the case of PC 01 core sediments, TOC showed the highest value of 0.20% near 70 cm. In the case of PC 02 core sediments, the highest value of 0.24% was indicated near 60 cm. The analysis method of organic carbon obtained from Hyung-Do Intertidal zone sediment sample results may be considered applicable to an organic carbon analysis for ocean sediments and useful for organic carbon analysis experiments of ocean sediments with a reduction in time required for the analysis and a high precision coupled with a high accuracy.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.689-701
• /
• 2013

Bacterial growth and corresponding consumption of carbon and phosphorus were examined in which tap water samples containing a very low concentration of free chlorine were supplemented with organic carbon and/or phosphorus. The experiments were performed in a fed-batch mode under a controlled temperature of $20^{\circ}C$. In the phosphorus alone-added water, there was no significant increase in bacterial numbers measured as heterotrophic plate count (HPC) in the bulk water. However, bacterial growth was stimulated by the addition of carbon (e.g., bulk HPC levels increased to $10^3CFU/mL$) and further stimulated by the combined addition of carbon and phosphorus (e.g., bulk HPC to $10^5CFU/mL$). The same effects were observed in biofilm HPC and biomass formed on polyethylene (PE) slide surfaces. In the water where organic carbon and phosphorus were added together, the highest biofilm HPC and biomass (measured as extracellular polymeric substance components) densities were observed which were $7.6{\times}10^5CFU/cm^2$ and $5.3{\mu}g/cm^2$, respectively. In addition to the bacterial growth, additions of organic carbon and/or phosphorus resulted in different bacterial carbon-to-phosphorus (C/P) consumption ratios. Compared to a typical bacterial C/P consumption ratio of 100:1, a higher C/P ratio (590:1) occurred in the carbon alone-added water, while a lower ratio (40:1) in phosphorus alone-added water. Comparative value (80:1) of C/P ratio was also observed in the water where organic carbon and phosphorus were added together. At the given experimental conditions, bacterial growth was deemed to be more sensitive to microbially available organic carbon than phosphorus. The effect of phosphorus addition, which resulted in a lower C/P consumption ratio, seemed to be tightly associated with the presence of microbially available organic carbon. These results suggested that the control of extrinsic carbon influx seemed to be more important to minimize bacterial regrowth in drinking water system, since even low content of phosphorus naturally occurring in drinking water was enough to allow a bacterial growth.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.84-91
• /
• 2000

The adsorption characteristics of a respirator cartridge is affected by the kind of adsorbent, concentration of organic vapor, humidity and packing density of cartridge. In this study, activated carbon fiber(ACF) instead of activated carbon is used as a adsorbent of cartridges for the removement of organic vapor and the adsorption characteristics were examined. ACF made of cellulose showes high efficiency for the removal of carbon tetrachloride and the adsorption capacity was 0.569g/g ACF at 450 ppm. The relative humidity dose not affected to the adsorbed amount and Langmuir Isotherm was more adequate than Freundlich Isotherm for this adsorption phenomena.

• Carbon letters
• /
• v.4 no.4
• /
• pp.180-184
• /
• 2003

The role of KOH in the one-stage KOH-activation of rice straws was studied using FTIR, XPS, TGA, and DTG techniques. It was found that at the impregnation, KOH extracts to some extent the lignin component from rice straw and reacts with hydroxyl groups. On heat-treatment, the impregnated KOH facilitates intermolecular condensation reaction on one hand but retards the thermal degradation of cellulose molecules on the other hand. The oxygen-containing surface functional groups newly created by oxidation of KOH may facilitate the bulk, not controlled, consumption of carbon atoms so that the effective porosities may not be able to be developed by the one-stage activation process.

• Environmental Engineering Research
• /
• v.22 no.2
• /
• pp.169-174
• /
• 2017

Vacuum swing adsorption (VSA) is a promising treatment method for volatile organic compounds (VOCs). This study focuses on a VSA process for regenerating activated carbon spent with VOCs, and then investigates its adsorption capacities. Toluene was selected as the test VOC molecule, and the VSA regeneration experiments results were compared to the thermal swing adsorption process. Cyclic adsorption-desorption experiments were performed using a lab-scale apparatus with commercial activated carbon (Samchully Co.). The VSA regeneration was performed in air (0.5 L/min) at 363.15 K and 13,332 Pa. The comparative results depicted that in terms of VSA regeneration, it was found that after the fifth regeneration, about a 90% regeneration ratio was maintained. These experiments thus confirm that the VSA regeneration process has good recovery while operating at low temperatures (363.15 K) and 13,332 Pa.

• Carbon letters
• /
• v.16 no.1
• /
• pp.51-56
• /
• 2015

Carbonate-type organic electrolytes were prepared using propylene carbonate (PC) and dimethyl carbonate (DMC) as a solvent, quaternary ammonium salts, and by adding different contents of 1-ethyl-3-methyl imidazolium tetrafluoroborate ($EMImBF_4$). Cyclic voltammetry and linear sweep voltammetry were performed to analyze conducting behaviors. The surface characterizations were analyzed by scanning electron microscopy method and X-ray photoelectron spectroscopy. From the experimental results, increasing the $EMImBF_4$ content increased the ionic conductivity and reduced bulk resistance and interfacial resistance. In particular, after adding 15 vol% $EMImBF_4$ in 0.2 M $SBPBF_4$ PC/DMC electrolyte, the organic electrolyte showed superior capacitance and interfacial resistance. However, when $EMImBF_4$ content exceeded 15 vol%, the capacitance was saturated and the voltage range decreased.

• Transactions of Materials Processing
• /
• v.33 no.4
• /
• pp.261-269
• /
• 2024

This study aimed to optimize the MIL-53 metal-organic framework coatings for enhanced durability in carbon dioxide capture applications. We synthesized MIL-53 powders using a hydrothermal method and deposited them on stainless-steel substrates by spin coating at various speeds, ranging from 300 to 2,000 rpm. The microstructure, surface properties, and tribological characteristics of the coatings were analyzed systematically. The results indicated that the spin speed significantly impacted the coating uniformity and defect formation. Coatings prepared at moderate speeds of 500 to 1,000 rpm exhibited optimal thickness and density, resulting in superior wear resistance. The tribological tests revealed that the coatings prepared at 700 to 1000 rpm had the lowest wear rates. These findings offer valuable insights for the development of durable MOF-based coatings for carbon dioxide capture and other applications requiring long-term stability under mechanical stress.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.1
• /
• pp.30-39
• /
• 2004

In order to understand the environmental impact of marine cage fish farms, we measured the vertical fluxes of particulate to the sediment, the distribution of organic carbon in core samples, sediment oxygen consumption rate (SOD), and macrobenthos with increasing distance from a fish cage in Miruk island located in Tongyong. The experiment was performed in August 2003. Measured values gradually decreased with distance, indicating that the organic matter in the sediment derived from the fish farm. The dominant macrobenthos species were Tharyx mulifilis, Lumbrineris longifolia, Sigambra tentaculata, and Capitella capitata, occupying 88% of the total population. Capirella capirata, an opportunistic polychaete species, were especially abundant between 0 to 5 m radius range. The estimated impact regions of organic matter enrichment based on sediment consilmption rates and compositions of macrobenthos were in good agreement. Most organic matter derived from the fish farm was deposited within a 10 m radius and then dispersed horizontally to nearby (at least 50 m) surface sediment. The vertical organic carbon fluxes to the sediment at the fish farm were higher by a factor of two than those outside the area. The remineralization organic carbon in the upper sediment layer was estimated to be 50% (1.07 g C m$^{-2}$ day$^{-1}$ ) at the fish farm. In contrast, outside the area, 30% (0.30 g C m$^{-2}$ day$^{-1}$ ) of organic carbon was recycled and the remaining 70% was deposited to the deep sediment layer.